This webinar demonstrates how GT-SUITE can be used to perform a number of investigations from basic architecture studies, component sizing and optimization, to full drive cycle analysis for modeling hybrid and electric vehicles.

This 30-minute webinar will introduce you modeling detailed pumps in GT-SUITE including pump performance in oil or hydraulic systems, air-in-oil and/or cavitation, and building 1D models of a vane or gerotor pumps directly from CAD files.

This Webinar provides an introduction to GT-SUITE Fast Running Engine Models (FRMs), including how FRMs are created, what their capabilities and limitations are, example applications, and information on the FRM Engine Database.

Gamma Technologies released v7.4 in fall of 2013 and presented many of its new features at GT Conferences around the world. This webinar includes new features and highlights of v7.4 and highlights of popular user presentations at the GT conferences.

This webinar will discuss reasons for considering simulation when modeling waste heat recovery systems using the Rankine Cycle, what is needed to get started, the kinds of situations that can be simulated, and how these models can be integrated with other systems, such as GT-POWER engine models.

This webinar gives an overview of exhaust aftertreatment modeling capabilities in GT-SUITE, including presentation of real world examples of exhaust aftertreatment models.

This webinar discusses GT-SUITE’s co-simulation abilities and the various tools that GT-SUITE can communicate and co-simulate with. A demonstration showing how GT-SUITE can co-simulate with Simulink and a Functional Mock-Up Unit (FMU) is included.

View this webinar as MathWorks and Gamma Technologies engineers demonstrate how to calibrate a modern aftertreatment model to experimental data using MATLAB and GT-SUITE.

Gamma Technologies released v7.5 in fall of 2015 and presented many of its new features at GT Conferences around the world. This webinar includes new features and highlights of v7.5 and highlights of popular user presentations at the GT conferences.

This webinar demonstrates how to model a valvetrain in GT-SUITE, including dynamics of a valvetrain (lifters, springs, etc.) and the influence these dynamics have on engine breathing and combustion.

In this webinar, Gamma Technologies and ESTECO experts, together with Francesco Maiani from Piaggio & C., speak about the improvement of a small 2-wheeler engine by leveraging GT-SUITE simulation capabilities and modeFRONTIER optimization analysis platform.

This 25-minute webinar video will discuss how new capabilities in GT-SUITE can be used by powertrain, transmission, and driveline engineers to solve detailed engineering problems in a system environment.

As fuel economy standards drive new vehicle efficiency requirements higher, it’s becoming even more important to accurately predict vehicle fuel economy early in the design process. This 25-minute webinar will discuss how GT-SUITE is perfectly suited for the fast-moving area of vehicle fuel economy and performance simulation.

Successful Urea/SCR system design requires capturing the composition and mixing upstream of the catalyst as well as the NOx reduction reactions that occur within the catalyst. This webinar video shows how to couple 3D CONVERGE CFD simulations with high fidelity 3D GT-SUITE surface chemistry simulations.

Gamma Technologies released v2016 in January, 2016 and presented many of its new features at GT Conferences around the world. This webinar includes new features and highlights of v2016 and highlights of popular user presentations at the GT conferences.

Turbochargers are expected to meet demands for high performance and maximum reliability. This 25-minute webinar will discuss how GT-SUITE is well suited for solving complex problems in turbocharger modeling.

In January 2017, Gamma Technologies released the latest version of GT-SUITE, v2017. We are excited to present this webinar to introduce you to many of the latest features. Learn how to utilize these key features and view highlights from our User Conferences held around the world. Topics include: GT-SUITE v2017 New Features Enhanced model-building productivity tools, […]

Simulating HVAC and cabin comfort for your vehicle design doesn’t have to be complicated. Learn how to create fast, accurate 3D cabin simulations by coupling GT-SUITE, TAITherm, and the Human Thermal Module to model cabins transiently and understand human comfort for your design. The coupling integration is simple, helping you create an efficient workflow that […]

This webinar highlights GT-DRIVE+, the new vehicle modeling platform from Gamma Technologies. Aimed at streamlining the process of constructing next-generation vehicle simulation models and management of their data, this new platform is well-suited to anyone looking to do advanced vehicle analysis. This 25-minute webinar provides an overview on vehicle modeling capabilities using GT-DRIVE+, and is divided into […]

As automotive fuel consumption and emissions regulations become more stringent on vehicle manufacturers, vehicle electrification is necessary to comply with regulations.  In the aerospace industry, the electrification of auxiliary systems, and even powertrain, is advancing.  For the power generation and transmission industry, challenges due to the cyclic nature of renewable energy sources require effective energy […]

In GT-SUITE v2019, we’ve added many features that address the challenges that come with modeling and simulation in an enterprise framework. In this 30-minute webinar, you will learn about the enhancements made in v2019 that will improve the simulation and workflow of all users across the enterprise. Highlights include: Advanced physical modeling and high-quality post-processing […]

V2019 includes many features that push the limits of vehicle simulation significantly further through higher productivity, deeper physics, and more predictiveness. In this 20-minute webinar, you will learn about new features that address current and future needs of electrification and vehicle design. Highlights include: GT-DRIVE+, GT’s easy-to-use vehicle modeling framework that empowers simulation engineers to […]

Lithium-ion (Li-ion) battery technology has proven to be a flexible solution for energy storage in the automotive, aerospace, and power generation industries. However, the efficiency and life span of a lithium-ion cell decreases significantly when it is operating outside of a preferred temperature range.  Effective thermal management of the battery cell is necessary for optimal […]

Turbochargers continue to strongly contribute to engine downsizing and efficiency trends. Using existing technology combined with new innovations, the limits of off-design conditions are being pushed like never before and with this comes new requirements. Through a new partnership between SoftInWay and Gamma Technologies, engineers can now meet requirements by utilizing AxSTREAM®’s turbomachinery component and performance map […]

Engineers face many challenges when developing screw machines including optimizing performance and efficiency, selecting optimal configurations, and understanding how the machine will perform in a surrounding system. GT-SUITE, a leading multi-physics simulation software, and SCORG, a unique software for the design and analysis of positive displacement screw compressors, provide a solution to these problems. By simulating […]

Simulation engineers face many tradeoffs in designing vehicles for optimal cabin comfort while maintaining high energy efficiency and extending battery range. Gamma Technologies and ThermoAnalytics provide a solution that helps engineers face this tradeoff, increase the speed of simulation, and sustain a high level of simulation accuracy. In this webinar, you will learn how to […]

GT-SUITE v2020 includes many enhancements to aid engineers in every step of the design process. Discover how to utilize v2020 to address your simulation challenges. Topics include: xEV modeling solutions 3D battery modeling with GT-AutoLion-3D Utilizing real driving cycles to better predict vehicle fuel economy Real-time engine simulation for SiL/HiL systems Custom python scripting with GT-Automation Fuel cell […]

It’s common for companies to spend a significant portion of their product development on calibration. This not only comes with a significant cost, but it also prevents companies from releasing new products as quickly as they and their customers want. Virtual calibration offers a solution to significantly reduce the number of months spent on this stage of development, greatly lowering the cost […]

Virtual Calibration offers a solution that shortens development time, allowing engineers to design better products while reducing testing costs. However, the mechanics behind this beneficial process are not widely understood. In this webinar, you will learn how to incorporate virtual calibration into your development process.  Topics include:  Steps taken in an effective workflow  Balancing fidelity, predictiveness, […]

As automotive fuel consumption and emissions regulations become more stringent on vehicle manufacturers, vehicle electrification is necessary to comply with regulations. This makes batteries one of the most critical components of the vehicle. To effectively manage the battery, the battery management system needs to perform a number of tasks like computing important parameters like state of […]

As automotive fuel consumption and emissions regulations become more stringent on vehicle manufacturers, vehicle electrification is necessary to comply with regulations. Early in the Electric Vehicle development cycle, the first step is often to define system level requirements like battery capacity and motor power to achieve marketing targets like range and acceleration time. Once, these […]

In this webinar, we cover introductory concepts of optimization in GT-SUITE, with a focus on engineering design. Topics include: What is the optimizer and how does it work Available search algorithms Expediting optimizations with distributed computing Multi-objective Pareto optimization Demonstrations We also have a webinar recording that presents how to use optimization to calibrate to measured […]

In this webinar, we cover three demos that explain how to use GT-SUITE’s optimizer to calibrate to measured data. At the end of the webinar, we will open it up to live Q&A. Topics include: Single response RLT demo Multiple response RLTs demo Transient targeting demo Other GT-ISE features to aid model calibration We also have […]

In this webinar, a 1D-3D synergetic approach will be presented for detailed component analysis by using GT’s proprietary technology, where the workflow from CAD data to final component and system model will be presented. This workflow allows to convert CAD geometry to a representative combination of 3D finite element mesh for the thermal domain and […]

In this webinar, we cover Design of Experiments (DOE) tools in GT-SUITE to facilitate better analysis between model input parameters and outputs.  Topics include: What is a Design of Experiments DOE setup and sampling Metamodeling (response surface fitting) Walkthrough/demo of the DOE post-processor Exporting metamodels to GT-ISE We also have a webinar recording that presents […]

This 30-minute webinar is filled with useful tips for efficient model setup and post-processing. Topics include: Case setup tips, including how to create super parameters Output setup options Advanced setup options Post processing map modes for better data visualization Using result files for data management Python scripting with GT-Automation Macros for improved data handling

In this webinar, we provide an overview of python scripting with GT-Automation, discuss its benefits, and demonstrate real-world applications. Topics include: What is GT-Automation What are the benefits to using Python Scripting/GT-Automation What features are available via the Python API Demonstrations of practical applications

In this webinar, we will provide an overview of how to predict vehicle behavior in a real life scenario using GT-RealDrive. We will discuss the benefits of GT-RealDrive, as well as demonstrate real-world applications.  At the end of the webinar, we will open it up to live Q&A. Topics include: What is GT-RealDrive Benefits to using GT-RealDrive Demonstration of GT-RealDrive

Across many industries, more and more companies are utilizing batteries as the primary source of energy for their products. When designing these products, one of the most important tasks is predicting and maximizing battery life to inform decisions on product warranty and create added value for customers. In this webinar, you’ll learn about the key […]

Hydrogen is emerging as a promising fuel due to its light weight, ability to be produced by renewable energy, and lack of emissions. It can be used to power a fuel cell in various transportation applications (electric vehicles, marine, aerospace) or power generation applications and as combustion fuel for reciprocating engines and turbines. In this […]

Simulation provides an excellent method to gain insight into battery aging. In this webinar, you will learn how to utilize GT-AutoLion and GT-SUITE to predict battery degradation. We walk through multiple examples to provide information on a wide variety of use cases. Topics include: Extrapolating beyond measured data Predicting how batteries will degrade in the […]

In this webinar, the optimization of a xEV  thermal management system design will be presented, with the focus on utilizing AC and cabin simulation within GT-SUITE. The motivation is to show the impact of the optimization not only on the AC system and the cabin itself, but also to look at the big picture: how […]

In many engine boosting applications, a third-party turbocharger needs to be integrated into a powertrain and the respective GT-POWER engine models. The challenge is that turbocharger map data is not always available for all scenarios and maps are often extrapolated/interpolated to provide usable inputs into engine system models. These assumptions often lead to unreliable off-design […]

The relationship between vehicle range and occupant comfort is an important consideration for EVs. Effective HVAC controllers are critical for maintaining the optimum occupant comfort while preserving vehicle range. Maintaining occupant comfort is more challenging for commercial vehicles; where the vehicle is large and has many occupancy configurations. Watch this video to learn how you […]

REGISTER TODAY to join our India team on May 5th for our webinar where GT’s Pavan Chandras will present, “Implementing Virtual Engine Calibration to Speed up your Development Process” where you will learn how virtual calibration saves money, shortens product development, and helps manufacturers meet compliance regulations; hear common calibration challenges that contribute to an […]

The trend toward more electric aircraft continues to accelerate. Simultaneously, simulation continues to increase to manage the complexity that comes with electric strategies. This 30-minute Webinar examines how simulation with GT-SUITE can shorten development time throughout the V-Cycle by exploring: Early concept propulsion architecture studies for optimizing range Battery, fuel cell, ICE, and hybrid concepts […]

Register today to join GT experts and guest speaker from Sanden, Oliver Derollepot! ABSTRACT Due to higher environmental standards and government regulations, production compressors need to be made more efficient. On one hand, the optimum solution is too expensive to be found from testing alone and on the other, 3D-CFD tools, although complete, only make […]

Enjoy a replay of our battery simulation webinar! When it comes to battery selection, integration and developing of controls strategy many unknown factors of vehicle in use phase need to be considered. Common limitations today make it difficult to gain control over lifetime, warranty and fleet prediction. Learn how to complement data driven insights and […]

Gamma Technologies had organized a webinar on, “Addressing the challenges of H2 ICE using system simulation” on 30th Nov 2022 at 3 to 4 pm IST. Our experts, Mr. Kai Gaukel, from our Stuttgart office and Mr. Hitesh Chaudhari from our India office, presented the solution we provide to the challenges faced by engineers working in the hydrogen ecosystem for internal […]

Gamma Technologies had organized a webinar on, “Addressing Challenges of Fuel Cell and Electrolyzer Development using System Simulation” on 11th Jan 2023 at 3 pm to 4 pm IST. Our expert Mr. Thomas Vevaud from GT’s European office and Mr. Hitesh Chaudhari from our India office presented the solution we provide to the challenges faced by Engineers working on Fuel Cell and […]