Webinar Video Library

In today’s fast-paced fuel cell industry, reducing time to market is both a strategic imperative and a competitive advantage. This 45-minute webinar will explore how system-level simulation is transforming the product development cycle — enabling engineering teams to virtually test and refine components, configurations, and control strategies long before physical prototypes are built. Join this […]

Join Gamma Technologies for an Exclusive Look at the HiL Development of the New V16 Bugatti Tourbillon Engine Hybrid powertrains are redefining performance in the hypercar segment—combining zero-emission driving with extreme engine capabilities. But with this innovation comes complexity, especially in control system development. As the number of degrees of freedom increases, so does the […]

When: June 17, 2025 09:00 AM (New-York, EDT) | 15:00 (Berlin, CET) | 6:30 PM (Pune, IST) Where: Online In the evolving landscape of aircraft electrification and progress towards advanced air mobility, safety has never been more paramount in an industry that flies the extra mile towards this pursuit. Predicting the possibilities of various fault […]

The growing complexity of energy systems demands smarter, faster, and more insightful microgrid design. Whether it’s enhancing energy resilience, integrating renewables, or optimizing costs, the key lies in a simulation platform that blends physical accuracy with economic intelligence—right from the concept stage. In this webinar, we explore a cutting-edge, techno-economic microgrid modeling workflow built on […]

Gamma Technologies invites you to a comprehensive live online training session focused on the fundamentals of electric motor modeling. This two-day program is designed for engineers and technical specialists looking to enhance their understanding of electric motor design, analysis, and system integration using GT-FEMAG. Participants will gain a practical introduction to electric machine modeling, with […]

The demands for higher energy density, longer cycle life, and faster charging in the automotive industry, are the pillars of Li-ion and beyond battery research. Interestingly, each of these pillars is closely linked to mechanical stress evolution in electrode materials. Topic: How to Overcome Mechanical Challenges in Lithium-Ion Batteries with Multiphysics Simulation Time: 09:00 AM […]

With the ever-increasing demands for improvements in screw machine performance and efficiency, engineers must optimize their designs. When selecting a design, it is important to consider not only the thermodynamic performance of the machine, but also the performance of the entire compressor system, including bearings, silencers, electric motors, and other components.  GT-SUITE, a leading multi-physics […]

Save the date for an engaging and insightful webinar “How Integrated System Simulation is Revolutionizing Vessel Power Generation and Propulsion Efficiency on LNG Carriers and Other Vessel Types” by Gamma Technologies and CLEOS, hosted by Riviera Maritime Media! Date: May 15, 2025 Time: 14:00 BST | 15:00 CET | 09:00 AM EDT | 6:30 PM […]

On Tuesday, April 29th, at 9 AM BST, Gamma Technologies’ Brazil and Rising Star’s own Marcus Bittar will give a live webinar on “Complete Vehicle Thermal Management” Link to watch and register Learn how to streamline the design process of thermal management systems for electric vehicles, optimizing their efficiency and range Leverage virtual testing and […]

The electric motor is a key source of noise in an electric powertrain. Effective Noise, Vibration, and Harshness (NVH) management requires advanced and integrated simulation techniques to identify and mitigate noise and vibration early in the design process. This ensures that electric motors not only deliver optimal performance but also enhance the driving experience with […]

On Tuesday, April 8th, at 9 AM BST, Gamma Technologies’ Brazil and Rising Star’s own Marcus Bittar will give a live webinar on “Machine Learning for Multi-physics Automotive Simulation” Link to watch and register This webinar will delve into how machine learning enhances battery modeling and vehicle system simulations, enabling faster, more accurate predictions and […]

This 45-minute webinar will introduce a physics-driven approach to simulate electric airplane systems — specifically looking at full-electric setups with several power supplies — which allows for the dimensioning and preliminary design of ePowertrain, thermal, and hydrogen subsystems to enhance performance across different mission profiles and environmental conditions. The session will explore advanced simulation software’s […]

Join Gamma Technologies and WinGD for a deep dive into how automated simulation solutions are revolutionizing marine engine development. Traditional engine model creation can take up to two weeks, making it difficult to manage the complexity of an extensive engine portfolio. This webinar will showcase how WinGD has streamlined this process—reducing model generation time from […]

On Tuesday, March 19th, at 9 AM BST, Gamma Technologies’ Brazil and Rising Star’s own Marcus Bittar will give a live webinar on “Using a Holistic Approach for Integrated Optimization of Electric Powertrains.” Link to watch and register Learn more about the simulation methodology for exploring the design space of batteries, motors, and inverters within […]

The transportation sector faces unprecedented challenges in achieving net zero emissions targets due to continuously rising environmental concerns. This 45-minute webinar explores computer-aided engineering (CAE) solutions for the intelligent design of innovative, eco-friendly systems for achieving net zero emissions. This program will propose a framework for optimized design of emissions mitigation technologies — by integrating […]

The HVACR industry is undergoing a transformation. With evolving regulations, increasing competition, shorter design cycles, and the need to minimize costly and time-consuming physical testing, Copeland turned to advanced simulation technology to meet these challenges head-on. Discover how scroll compressor mechanical modulation and HVACR system optimization are driving sustainable HVACR solutions through cutting-edge simulation, guided […]

A common trend observable across multiple industries is increasing system complexity coupled with tighter performance and efficiency demands. Meeting these requirements and exceeding customer expectations requires a reevaluation of long-standing processes and in certain cases, a shift from stand-alone design and simulation. To achieve the optimal product and avoid costly iteration loops, complex interactions between […]

In this webinar, presented Gamma Technologies’ own Arne Heinrich (Senior Application Engineer, Thermal Fluid Systems), a heat pump with propane is presented as designed using GT-SUITE, based on an existing system with R410A. An attempt is made to preserve the majority of the existing components. Access the recording Driven by regulatory requirements, alternatives to classic […]

Lithium-ion batteries (LIBs) play a vital role in the advancement of electric vehicles and sustainable energy solutions. They are favored over other secondary energy storage systems due to their high energy density, long cycle life, high nominal voltage, and low self-discharge rate. However, the latency of LIBs’ internal states makes it difficult to predict their […]

In order to fully transition to a carbon-neutral society, large amounts of hydrogen will be needed. This entails the need to develop sustainable ways to produce, store, and dispense hydrogen to meet the demands of a constantly growing market. Especially in industries such as steel manufacturing or chemical processes, the transition to hydrogen is crucial […]

In this webinar, presented by Gamma Technologies’ own Nils Framke (Principal Engineer, Product & Apps Strategy) talks about how in heat pump systems operating with high-pressure ratios and extended environmental conditions, vapor injection compressor systems are used to increase the system coefficient of performance (COP) and lower the operating expenditure. Access the recording Such systems […]

Watch the webinar “Fuel Cell Fault Simulation and Detection for On Board Diagnostics using Real-Time Digital Twins ” presented by Gamma Technologies’ own Christian Altenhofen and Pantelis Dimitrakopoulos. Access the recording About the webinar: The modern automotive industry is facing challenges of ever-increasing complexity in the electrified powertrain era. On-board diagnostic (OBD) systems must be […]

Undoubtedly, fast and accurate battery models are crucial for various applications such as electric vehicles, renewable energy storage, and portable electronics. Machine learning techniques offer the ability to develop efficient and comprehensive models for automotive simulation including batteries and their thermal aspects. This 45-minute webinar explores how to use machine learning to develop these more […]

In this webinar, presented by Gamma Technologies’ Yogesh Nalam (Senior Application Engineer, Thermal Fluid Systems), we will explore two different battery cooling methods, cold plate and immersion cooling, and address the challenges of thermal runaway through numerical simulations. Access the recording Thermal runaway is a complex 3D multi-physics issue that demands significant computational resources. Hence, […]

This webinar, presented by Gamma Technologies’ own Sagar Kulkarni (Senior Engineer, Application Engineering | Thermal Management), investigates methods aimed at streamlining complex thermal management models of battery electric vehicles (BEVs). A high-fidelity model of a BEV is used, featuring detailed thermal representations of components and several cooling, chiller, and AC circuits. The focus is on […]

This webinar, presented by Gamma Technologies’ own Michael Zagun (Staff Application Engineer, Mobility & System Integration) and Thomas Vevaud (Senior Application Engineer, Reactive Flow Systems), highlights the multi-objective optimization of a fuel-cell powered in-harbor tugboat propulsion under selected duty cycle and weather conditions. Access the recording The dynamic and forward-facing multi-physics simulation model integrates a […]

In this webinar, presented by Gamma Technologies’ own Nils Framke (Principal Engineer, Product & Apps Strategy) talks about the advancements in fault detection and predictive maintenance for complex physical systems in the era of Industry 4.0. Access the recording With the vast amount of data available today, there is a growing potential to effectively predict […]

In this webinar, presented by Gamma Technologies’ own Milan Cvetković (Senior Application Engineer, Mobility & System Integration) and Pantelis Dimitrakopoulos (Staff Application Engineer, Mobility Systems & Integration) explores the challenges and opportunities associated with the integration of a full e-Powertrain into a fuel cell truck, focusing on the seamless coordination of various components such as […]

Batteries, motors, and inverters make up the essential trio of any electric powertrain, and each of these has a significant impact on the cost, range, efficiency, and performance of an electrified vehicle. Too often, though, these components are designed and optimized separately, instead of being optimized together, as a system. In this 45-minute Webinar, Gamma […]

In this webinar, presented by Gamma Technologies’ own Massimiliano Mastrogiorgio (Senior Application Engineer, Electrical Systems • Battery Systems), we discuss machine learning techniques to develop efficient and comprehensive battery models, including thermal aspects. We will showcase how machine learning algorithms are employed to capture complex battery behaviors quickly and integrate them into vehicle system models. […]

Much time and consideration from automotive engineers goes into analysis of noise, vibration, and harshness (NVH) since consumers expect their vehicles to provide as quiet and smooth a ride as possible. Modern technological advancements provide a multitude of opportunities to maximize design success in this area. In this 30-minute Webinar, Gamma Technologies’ own Greg Fialek […]

Thermal runaway propagation is a key safety challenge when designing a battery system, but studying thermal runaway events at the pack-level has historically heavily relied on expensive pack-level experimental tests using prototype batteries or 3D CAE analyses. Because the cost of a single test in either scenario is very high, both options allow for only […]

This webinar was organized and hosted in cooperation with the Maritime Battery Forum, Gamma Technologies and Toshiba to introduce the concept of a digital twin model of Toshiba’s SCiB cell. The model is based on a GT-AutoLion electrochemical physics predictive solution, and it’s shown how it can be integrated into the GT-SUITE’s multiphysics system simulation […]

Advanced electrochemical modelling and simulation of Li-ion cells can substantially benefit in the design of a battery cell/pack for EV and stationary applications. Creating a highly accurate virtual cell that incorporates complex electro-chemical phenomena for performance, ageing, and safety studies of battery cells/packs can be challenging. Attendees joined us for this interactive webinar to learn […]

Gamma Technologies had organized a webinar on, “Addressing the challenges of H2 ICE using system simulation” on 30th Nov 2022 at 3 to 4 pm IST. Our experts, Mr. Kai Gaukel, from our Stuttgart office and Mr. Hitesh Chaudhari from our India office, presented the solution we provide to the challenges faced by engineers working in the hydrogen ecosystem for internal […]

Gamma Technologies had organized a webinar on, “Addressing Challenges of Fuel Cell and Electrolyzer Development using System Simulation” on 11th Jan 2023 at 3 pm to 4 pm IST. Our expert Mr. Thomas Vevaud from GT’s European office and Mr. Hitesh Chaudhari from our India office presented the solution we provide to the challenges faced by Engineers working on Fuel Cell and […]

Enjoy a replay of our battery simulation webinar! When it comes to battery selection, integration and developing of controls strategy many unknown factors of vehicle in use phase need to be considered. Common limitations today make it difficult to gain control over lifetime, warranty and fleet prediction. Learn how to complement data driven insights and […]

Register today to join GT experts and guest speaker from Sanden, Oliver Derollepot! ABSTRACT Due to higher environmental standards and government regulations, production compressors need to be made more efficient. On one hand, the optimum solution is too expensive to be found from testing alone and on the other, 3D-CFD tools, although complete, only make […]

The trend toward more electric aircraft continues to accelerate. Simultaneously, simulation continues to increase to manage the complexity that comes with electric strategies. This 30-minute Webinar examines how simulation with GT-SUITE can shorten development time throughout the V-Cycle by exploring: Early concept propulsion architecture studies for optimizing range Battery, fuel cell, ICE, and hybrid concepts […]

REGISTER TODAY to join our India team on May 5th for our webinar where GT’s Pavan Chandras will present, “Implementing Virtual Engine Calibration to Speed up your Development Process” where you will learn how virtual calibration saves money, shortens product development, and helps manufacturers meet compliance regulations; hear common calibration challenges that contribute to an […]

The relationship between vehicle range and occupant comfort is an important consideration for EVs. Effective HVAC controllers are critical for maintaining the optimum occupant comfort while preserving vehicle range. Maintaining occupant comfort is more challenging for commercial vehicles; where the vehicle is large and has many occupancy configurations. Watch this video to learn how you […]

In many engine boosting applications, a third-party turbocharger needs to be integrated into a powertrain and the respective GT-POWER engine models. The challenge is that turbocharger map data is not always available for all scenarios and maps are often extrapolated/interpolated to provide usable inputs into engine system models. These assumptions often lead to unreliable off-design […]

In this webinar, the optimization of a xEV  thermal management system design will be presented, with the focus on utilizing AC and cabin simulation within GT-SUITE. The motivation is to show the impact of the optimization not only on the AC system and the cabin itself, but also to look at the big picture: how […]

Simulation provides an excellent method to gain insight into battery aging. In this webinar, you will learn how to utilize GT-AutoLion and GT-SUITE to predict battery degradation. We walk through multiple examples to provide information on a wide variety of use cases. Topics include: Extrapolating beyond measured data Predicting how batteries will degrade in the […]

Hydrogen is emerging as a promising fuel due to its light weight, ability to be produced by renewable energy, and lack of emissions. It can be used to power a fuel cell in various transportation applications (electric vehicles, marine, aerospace) or power generation applications and as combustion fuel for reciprocating engines and turbines. In this […]

Across many industries, more and more companies are utilizing batteries as the primary source of energy for their products. When designing these products, one of the most important tasks is predicting and maximizing battery life to inform decisions on product warranty and create added value for customers. In this webinar, you’ll learn about the key […]

In this webinar, we will provide an overview of how to predict vehicle behavior in a real life scenario using GT-RealDrive. We will discuss the benefits of GT-RealDrive, as well as demonstrate real-world applications.  At the end of the webinar, we will open it up to live Q&A. Topics include: What is GT-RealDrive Benefits to using GT-RealDrive Demonstration of GT-RealDrive

In this webinar, we provide an overview of python scripting with GT-Automation, discuss its benefits, and demonstrate real-world applications. Topics include: What is GT-Automation What are the benefits to using Python Scripting/GT-Automation What features are available via the Python API Demonstrations of practical applications

This 30-minute webinar is filled with useful tips for efficient model setup and post-processing. Topics include: Case setup tips, including how to create super parameters Output setup options Advanced setup options Post processing map modes for better data visualization Using result files for data management Python scripting with GT-Automation Macros for improved data handling

In this webinar, we cover Design of Experiments (DOE) tools in GT-SUITE to facilitate better analysis between model input parameters and outputs.  Topics include: What is a Design of Experiments DOE setup and sampling Metamodeling (response surface fitting) Walkthrough/demo of the DOE post-processor Exporting metamodels to GT-ISE We also have a webinar recording that presents […]