Trainings and Seminars
Classes and Seminars
GT offers classroom-style training classes throughout the year. Classes range from Basic Training to Advanced Special Topic Classes.
Customized Client Training
Individual client training classes can be scheduled at a customer’s request. Typically, this type of training covers 1 day of software fundamentals, and then 2-3 days of building a model from scratch of a specific system of interest to the customer.
Not located in North America? Select the desired region in the box below.
Event List
This FREE course will introduce GT-SUITE to new users. The course will be two half-days with a break from approximately 1-2 CST. The intention of this training is to teach handling of the software to enable users to build models and post-process results. This is demonstrated through hands-on exercises with relatively simple models in the […]
This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training. This 2-day class will introduce the use of GT-SUITE software for modeling of air conditioning or heat pump systems, including the refrigerant circuit, HVAC ducting, and cabin. The class is targeted towards engineers with responsibility for design and […]
This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training. This 2-day class will introduce the use of the COOL3D pre-processing tool for modeling the underhood airflow. The focus of this class is on the airflow in the underhood compartment and heat exchanger performance calculations. The class is targeted towards […]
This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training. This 2-day class will introduce the use of GT-SUITE for modeling of fuel cell stacks and systems. This course is targeted towards engineers responsible for fuel cell sizing, performance modeling, and balance of plant systems design. This course will be conducted online via […]
This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training. This 2-day class will introduce the use of GT-SUITE software for modeling the distribution of heat within components of the electric powertrain, specifically electric motors. Electric motor heat distribution models allow the prediction of heat rejection to coolant […]
This class is intended for users with previous experience or users who participate in the free-of-charge Introduction Training. This course will be conducted online via web meeting. To reserve your spot, you must have access to the following: Computer with GT-SUITE v2021 (the training will be conducted with v2021, but if you only have v2020 […]
This FREE course will introduce GT-SUITE to new users. The course will be two half-days with a break from approximately 1-2 CST. The intention of this training is to teach handling of the software to enable users to build models and post-process results. This is demonstrated through hands-on exercises with relatively simple models in the […]
This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training. This 2-day class will introduce to cabin modeling and simulation in GT-SUITE. It will introduce the user to the three different levels of cabin modeling in GT-SUITE: Mono-Volume, Multi-Volume and 3D. For each level the model building process will […]
This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training. This course will be conducted online via web meeting. To reserve your spot, you must have access to the following: Computer with GT-SUITE v2021 (the training will be conducted with v2021, but if you only have v2020 that […]
This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training. This class is designed for users of GT-SUITE that are interested in modeling flow acoustics. This class will specifically focus on simulation of intake and exhaust systems, including resonators, airboxes, catalysts, and mufflers. General NVH topics will also be discussed […]
This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training. This 2-day course will introduce engineers to the modeling of fuel injection and hydraulic components and complete hydraulic systems in GT-SUITE. This course will be conducted online via web meeting. To reserve your spot, you must have […]
This 2-day class is designed for users with previous experience in GT-SUITE cabin applications or users who attended the Cabin Modeling (Basic) training. It will focus on the simulation of advanced 3D cabin modeling topics. This course will be conducted online via web meeting. To reserve your spot, you must have access to the following: Computer with GT-SUITE […]
This 2-day class is designed for users with previous experience in GT-SUITE Valvetrain Applications. It will focus on the simulation of special engine valvetrains topics through the use of GT-SUITE. This course will be conducted online via web meeting. To reserve your spot, you must have access to the following: Computer with GT-SUITE v2021 (the training […]
This FREE course will introduce GT-SUITE to new users. The course will be two half-days with a break from approximately 1-2 CST. The intention of this training is to teach handling of the software to enable users to build models and post-process results. This is demonstrated through hands-on exercises with relatively simple models in the […]
This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training. This 2-day class will introduce the use of GT-SUITE software for modeling of Rankine cycle based waste heat recovery systems. The class is targeted towards engineers with responsibility for design and analysis of WHR systems, or for […]
This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training. This 2-day class will introduce the use of GT-SUITE software for modeling the distribution of heat within the engine thermal structure. Engine heat distribution models allow the prediction of heat rejection to coolant and oil at any […]
This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training. This course will be conducted online via web meeting. To reserve your spot, you must have access to the following: Computer with GT-SUITE v2021 (the training will be conducted with v2021, but if you only have v2020 […]
This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training. This course will be conducted online via web meeting. To reserve your spot, you must have access to the following: Computer with GT-SUITE v2021 (the training will be conducted with v2021, but if you only have v2020 […]
This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training. This course will be conducted online via web meeting. To reserve your spot, you must have access to the following: Computer with GT-SUITE v2021 (the training will be conducted with v2021, but if you only have v2020 […]
This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training. This course will be conducted online via web meeting. To reserve your spot, you must have access to the following: Computer with GT-SUITE v2021 (the training will be conducted with v2021, but if you only have v2020 […]
This FREE course will introduce GT-SUITE to new users. The course will be two half-days with a break from approximately 1-2 CST. The intention of this training is to teach handling of the software to enable users to build models and post-process results. This is demonstrated through hands-on exercises with relatively simple models in the […]
This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training. This 2-day class will introduce the use of GT-SUITE software for modeling of vehicle cooling systems. The class is targeted towards engineers with responsibility for vehicle thermal management, or for those who are responsible for specifying cooling […]
This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training. This course will be conducted online via web meeting. To reserve your spot, you must have access to the following: Computer with GT-SUITE v2021 (the training will be conducted with v2021, but if you only have v2020 […]
This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training. This 2-day class will introduce the use of GT-AutoLion and GT-SUITE for modeling of battery systems, modules, and cells. This course is targeted towards engineers responsible for battery sizing, cell selection, battery characterization, battery performance modeling, and battery […]
This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training. This course will be conducted online via web meeting. To reserve your spot, you must have access to the following: Computer with GT-SUITE v2021 (the training will be conducted with v2021, but if you only have v2020 […]
This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training. This 2-day class will introduce the use of GT-SUITE software for modeling the distribution of heat within batteries. Battery heat distribution models enable users to design and optimize the battery pack and its related cooling components such as cooling […]
This FREE course will introduce GT-SUITE to new users. The course will be two half-days with a break from approximately 1-2 CST. The intention of this training is to teach handling of the software to enable users to build models and post-process results. This is demonstrated through hands-on exercises with relatively simple models in the […]
This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training. This 2-day class will introduce the use of GT-SUITE software for modeling of air conditioning or heat pump systems, including the refrigerant circuit, HVAC ducting, and cabin. The class is targeted towards engineers with responsibility for design and […]
This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training. This 2-day class will introduce the use of the COOL3D pre-processing tool for modeling the underhood airflow. The focus of this class is on the airflow in the underhood compartment and heat exchanger performance calculations. The class is targeted towards […]
This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training. This 2-day class will introduce the use of GT-SUITE for modeling of fuel cell stacks and systems. This course is targeted towards engineers responsible for fuel cell sizing, performance modeling, and balance of plant systems design. This course will be conducted online via […]
This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training. This 2-day class will introduce the use of GT-SUITE software for modeling the distribution of heat within components of the electric powertrain, specifically electric motors. Electric motor heat distribution models allow the prediction of heat rejection to coolant […]
This FREE course will introduce GT-SUITE to new users. The course will be two half-days with a break from approximately 1-2 CST. The intention of this training is to teach handling of the software to enable users to build models and post-process results. This is demonstrated through hands-on exercises with relatively simple models in the […]
This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training. This 2-day class will introduce to cabin modeling and simulation in GT-SUITE. It will introduce the user to the three different levels of cabin modeling in GT-SUITE: Mono-Volume, Multi-Volume and 3D. For each level the model building process will […]
This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training. This course will be conducted online via web meeting. To reserve your spot, you must have access to the following: Computer with GT-SUITE v2021 (the training will be conducted with v2021, but if you only have v2020 that […]
This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training. This class is designed for users of GT-SUITE that are interested in modeling flow acoustics. This class will specifically focus on simulation of intake and exhaust systems, including resonators, airboxes, catalysts, and mufflers. General NVH topics will also be discussed […]
This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training. This 2-day course will introduce engineers to the modeling of fuel injection and hydraulic components and complete hydraulic systems in GT-SUITE. This course will be conducted online via web meeting. To reserve your spot, you must have […]
This 2-day class is designed for users with previous experience in GT-SUITE cabin applications or users who attended the Cabin Modeling (Basic) training. It will focus on the simulation of advanced 3D cabin modeling topics. This course will be conducted online via web meeting. To reserve your spot, you must have access to the following: Computer with GT-SUITE […]
This 2-day class is designed for users with previous experience in GT-SUITE Valvetrain Applications. It will focus on the simulation of special engine valvetrains topics through the use of GT-SUITE. This course will be conducted online via web meeting. To reserve your spot, you must have access to the following: Computer with GT-SUITE v2021 (the training […]