IDAJ SYMPOSIUM 2023

Save the date!​

IDAJ Co., LTD. is excited to host the 2023 IDAJ SYMPOSIUM 2023 in person on November 10, 2023 at the Yokohama Bay Hotel Tokyo in Yokohama, Japan. This event will feature presentations from leading organizations on how they achieve their groundbreaking work using GT-SUITE.​

Check out the preliminary agenda where we have presentations from industry leaders such as NASA, Aisin, Interstellar Technologies, and many more!​

Learn more about this event here.​

[GT-SUITE Session]​

自動車の電動化が進む中、マルチフィジックス・システムシミュレーションツールGT-SUITEは、多くの機能追加し、またオプションプロダクトをご提供することで、ここ数年で解析対象を大きく広げることができました。エンジン搭載車だけでなく、BEVやFCEVなどの熱マネージメント解析にも、GT-SUITEをご利用いただくお客様が急速に増えていることを実感いたします。​
数多あるGT-SUITEの特徴の中で最たるものが、システムシミュレーションツールでありながら、豊富な物理モデルによって比較的詳細なモデル化を実現し、計算精度を高めることができる点にあると考えています。一般的に精度の高いモデルというのは計算時間がかかりますが、GT-SUITEではモデル縮退や高速ソルバーGT-POWERxRTにデータ変換することで、Vプロセスの左バンクでの利用だけでなく、右バンクにおけるHILSでのバーチャルキャリブレーションや実機連成によるリアルタイムシミュレーションなど、開発工程のあらゆるプロセスに適用領域が拡大しています。さらにモデルの活用は一つの会社に留まらず、OEMとサプライヤ間でデータ共有して共同開発するなど、もはやMBDなしでは製品開発が成り立たなくなっていることは疑いようがありません。​
これら現状を踏まえて本会では、幅広い領域での有効的な“GT-SUITEの使われ方”をご認識いただけるようにプログラムを企画いたしました。​
まずGT-SUITEの開発元であるGamma Technologies社様には「Success Stories of xEV Development with GT-SUITE in the U.S. and Europe（欧米におけるGT-SUITEを用いたxEV開発成功事例）」と題して最近の欧米でのユーザーカンファレンスなどでご発表された各社の活用事例をサマリ形式でご紹介いただきます。​
マツダ様からはBEVの熱マネージメントとGT-POWERxRTを用いたソルバー高速化事例の2件のご発表をいただきます。またトヨタ自動車様からは、事業所間のモデル共有および分散実行環境構築事例を、自動車業界以外の活用事例としては、ロケット開発のスタートアップとして著名なインターステラテクノロジズ様より液体ロケットエンジン領域でのGT-SUITE活用事例についてご講演いただきます。もちろん、GT-SUITEの最新機能についてもご説明させていただきます。​
ご利用中のGT-SUITEのさらなる有効活用、またご導入検討にご参考となる内容になっておりますので、ぜひ多くの方にご参加いただければと考えております。​

​

日程：2023年11月10日（金） 10：00～17：30（予定）　受付 9：30～​

会場：横浜ベイホテル東急​

参加費：無料・事前登録制​

​

イベントの詳細ならびに最新のプログラムは「IDAJ SYMPOSIUM 2023」のWebページをご覧ください

IDAJ SYMPOSIUM [Online] 2023

Save the date!​

IDAJ Co., LTD. is excited to host the IDAJ SYMPOSIUM [Online] 2023 from December 5-15, 2023. This event will distribute many videos, including past event presentations (on November 10).  These videos are from leading organizations on how they achieve their ground-breaking work using GT-SUITE.​

Check out the preliminary agenda where we have presentations from industry leaders such as NASA, Interstellar Technologies, Mazda, Toyota, and many more!​

Learn more about this event here.

振り返ると2020年11月、COVID-19による行動制限に伴って止むを得ず、職場からでもご自宅からでも様々な技術情報を収集していただけるオンラインカンファレンス「IDAJ Conference Online」を開催して参りました。コロナ禍直前のカンファレンスと、オンラインカンファレンスへのご登録者様の数を比較すると、その数は約230％に増加し、この参加のための時間と場所を選ばない情報提供プラットフォームは、非常に有益であることを強く認識するにいたりました。そこで、今年はご講演者様のご厚意により、会場でのご発表を12月のオンラインイベントでも動画としてご提供いただき、ご業務やスケジュールのご都合で会場までお越しいただけないお客様にも貴重なご講演をご覧いただけるようになりました。また、11月10日（金）の一日だけではご紹介しきれないソフトウェア開発元やIDAJ等からの技術情報を、オンラインイベントで多数お届けします。​

開発・設計に不可欠なシミュレーションやMBDといったデジタルエンジニアリング技術、電動化、人工知能、材料選択支援、CASE等に関わるユーザー様からのお取組み事例のご紹介、弊社で作成したコンテンツに加えて、開発元各社からの情報提供を含んだ盛りだくさんのコンテンツを、11日間にわたってオンデマンドで配信いたします。お時間が許す限り、ご興味のある技術分野のコンテンツをご覧いただければ幸いでございます。​

皆様のバーチャルセッション会場へのご来場を、社員一同心よりお待ち申し上げております。​

​

日程：2023年12月5日（火） 10：00～12月15日（金）17：00（予定）​

開催形式：オンライン​

参加費：無料・事前登録制​

イベントの詳細ならびに最新のプログラムは「IDAJ SYMPOSIUM 2023」のWebページをご覧ください

Vehicle Multi-physics Systems Integration and Optimization 

Fuel Cell and Hydrogen Systems Integration and Optimization 

• V2024 New Features
• Fuel cell and stack design
• Efficient fuel cell plant model creation
• Vehicle & Controls Integration
• Electrolysis & Hydrogen Infrastructure

Leveraging Machine Learning (ML) for system simulation

Future Directions in Engine Performance Modeling

• Overview of predictive combustion models available in GT-SUITE (SI, Diesel, Dual Fuel, Pre-chamber Jet Ignition, etc.)
• Knock, emissions, and cycle-to-cycle variations (CCV)
• Fast chemical kinetics solvers for gas phase reactions in cylinder and exhaust system
• Modeling of non-carbon fuels such as Hydrogen and other alternative fuels such as Ethanol, Methanol etc.
• Other relevant new features in GT-SUITE v2024
• Focus on real time engine models for a variety of applications, shortening development time in the virtual calibration process.
• Leveraging of GT-Models in the entire V-Cycle – from early development phases to product testing, digital twin.
• Fundamentals and semi-automated creation of real-time capable models using the latest Converter tools
• Deployment, Democratization of models within organisation for different needs

Mechanical Dynamics for Conventional and E-Powertrain

• v2024 new features
• Powertrain NVH
• Battery swelling
• 3D MBD
• Automation of simulation and analysis in mechanical applications
• Integration of powertrain performance models

Thermal Management for xEVs system and Component Safety 

• Thermal distribution and security in 1D and 3D
• Tight integration with 3D cabin simulation focusing on passenger comfort and system performance evaluations
• Advancements in condensation and frost model predictions
• Battery Thermal Runaway modeling

Battery Modeling: Multi-Physics Integration Focus

• System-level integration & real-world aging scenarios with GT-SUITE & GT-AutoLion
• Modeling thermal runaway
• Machine Learning for fast, integrated battery modeling
• Real Time and Controls-Focused Battery Modeling

Battery Modeling- Cell Focus

FEMAG user meeting 2023

The 2023 FEMAG user meeting offers you:

• Pre-program with various training offers,

• the presentation of the innovations in FEMAG,

• Lectures on electrical machines and the use of FEMAG,
• Opportunity for personal professional exchange with colleagues.

Register now at https://www.profemag.ch/2-profemag/4-femag-anwender-treffen-2023

Download the final agenda here.

Optional: online compact training  
(free of charge, for beginners and experts, language German, registration: click on the link)

 

Online Engine Friction Modeling for Cranktrain Components

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training and preferably the Cranktrain Modeling Training.

This 1-day class will focus on the sub-systems that play a major part in terms of overall mechanical power losses of an engine. The participants will learn how to set these systems up, how to investigate different designs/parameters and how to put everything in context.

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

• • Computer with GT-SUITE v2023 (the training will be conducted with v2023, but if you only have v2022 that is acceptable)
  • Access to an active license
  • Good internet connection
  • Ideally two monitors/devices (although not required)
    • one to follow the instructor on the web meeting (web browser only)
    • one to use GT-SUITE for interactive model building

The topics that will be covered in detail are:

Basic Concepts of Friction Modeling in GT-SUITE:

• Components and Reference Objects like Surfaces/Coatings, Oil Properties etc.

Crankshaft Analysis

• Journal Bearing Modeling in detailed level (from map-based solution to EHD Bearings)

• Seals and other Losses (TVD)

Piston-Group Dynamics

• Piston Rings Design
• Compliant Piston Skirt to Liner Model incl. Extraction of Stiffness Matrices

Evaluation of Results

• Calibration of results vs. measured data
• Results in context of vehicle driving cycle
• Introduction into concepts on how to optimize different quantities such as fuel consumption

If time permits, extra and more specialized topics may be covered. The topics will be selected by the participants. Some possible topics are: Blowby and Oil Evaporation, user-supplied.

*If you intend to participate in both Trainings (Cranktrain Modeling and Engine Friction Modeling), please contact the instructor before registration. The regular fee will be $1300 and the university fee $700.

Due to the limited number of seats, priority will be given to commercial clients.

Online Cranktrain Modeling

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This 1-day class is designed for those interested in Cranktrain modeling and analysis in GT-SUITE. It will focus on the simulation of engine cranktrain dynamics through the use of GT-SUITE.

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

• • Computer with GT-SUITE v2023 (the training will be conducted with v2023, but if you only have v2022 that is acceptable)
  • Access to an active license
  • Good internet connection
  • Ideally two monitors/devices (although not required)
    • one to follow the instructor on the web meeting (web browser only)
    • one to use GT-SUITE for interactive model building

The following topics will be covered:

Rigid Crankshaft Analysis

• Crankshaft Balancing
• Cylinder Pressure Boundary Conditions Applied

Crankshaft Torsional Analysis

• Time Domain Solution with Steady State Convergence
• Frequency Domain Solutions (Free and Forced)

Crankshaft Quasi-Static and Dynamic Bending Solution

• Fillet Stress Calculations Based on Dynamic Loading
• Coupled Journal Bearing Solution

If time permits, extra and more specialized topics may be covered. The topics will be selected by the participants. Some possible topics are: Block Vibration, Integrated Simulations (e.g. cranktrain + valvetrain, cranktrain + drivetrain), Transient simulations, user-supplied.

*If you intend to participate in both Trainings (Cranktrain Modeling and Engine Friction Modeling), please contact the instructor before registration. The regular fee will be $1300 and the university fee $700.

Due to the limited number of seats, priority will be given to commercial clients.

Online Optimization & DOE

This class is intended for experienced users or users who participate in this free-of-charge Introduction Training.

This class is intended for GT-SUITE users interested in enhancing their productivity by learning how to use the optimization tools included in the software.

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

• Computer with GT-SUITE v2023 (the training will be conducted with v2023, but if you only have v2021 or v2022 that is acceptable)
• Access to an active license
• Good internet connection
• Ideally two monitors/devices (although not required)
  • one to follow the instructor on the web meeting (web browser only)
  • one to use GT-SUITE for interactive model building

The class will cover setup, execution and postprocessing of the integrated design optimizer and the GT DOE (Design of Experiments) tool. The handling will be practiced in simple exercises. The following topics will be discussed in detail:

• Integrated Design Optimizer
  • Optimization Search Algorithms
  • Mutli-Objective Optimizations
  • Case-Sweep Optimization
• DOE Tool
  • Fast Data Analysis
  • Creation and Cross-validation of Metamodels
  • Fast Optimizations using Metamodels
  • Exporting metamodels back to GT-ISE
  • Monte Carlo DOE Sampling & Variability Analysis
• Distributed Computing

Due to the limited number of seats, priority will be given to commercial clients.

Online GT-DRIVE+: xEV Modeling

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This 1,5-day class is intended for those interested in developing Hybrid Electric Vehicle or pure Electric Vehicle models for fuel economy or range studies.

This course will be conducted online via web meeting. To reserve your spot, you must have access to the following:

Day 1 – Wednesday, 06th December– 9:00 – 17:00

Day 2 – Thursday, 07th December – 9:00 – 13:00

Computer with GT-SUITE v2023 (the training will be conducted with v2023, but if you only have v2022 that is acceptable)

• • Access to an active license
  • Good internet connection
  • Ideally two monitors/devices (although not required)
    • one to follow the instructor on the web meeting (web browser only)
    • one to use GT-SUITE for interactive model building

The following topics will be covered in this class:

Introductory Concepts of GT-SUITE:

• 1-D Mechanical Simulation
• Model Setup- initialization, parameters sweep, Optimization/Design of Experiments
• Post-processing (GT-POST)
• Subassemblies: internal, external, encryption of subassemblies

The following vehicle modeling topics will be included:

• Conventional Driveline Components
  • Map based Engine Model
  • Transmissions (Automatic, Manual, CVT, Other)
• Electric Driveline Components
  • Battery
  • Electric Motors
• Controls
  • Vehicle Driver
  • Low level Controllers
• Supervisory Control Strategies
• Application of Energy efficient Management Strategies
  • ECMS
  • Dynamic Programing
• Driving Cycle Analysis (with Model Based Targeting Controller)

Due to the limited number of seats, priority will be given to commercial clients.

Online Cabin Modeling & Simulation (Advanced)

This 1-day class is designed for users with previous experience in GT-SUITE cabin applications or users who attended the Cabin Modeling (Basic) training. It will focus on the simulation of advanced 3D cabin modeling topics.

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

• • Computer with GT-SUITE v2023 (the training will be conducted with v2023, but if you only have v2022 that is acceptable)
  • Access to an active license
  • Good internet connection
  • Ideally two monitors/devices (although not required)
    • one to follow the instructor on the web meeting (web browser only)
    • one to use GT-SUITE for interactive model building

The class will consist primarily of interactive model building exercises. The following are the primary topics to be covered:

• Model building in GT-TAITherm: Modeling of a thermal structure model using a 3D cabin geometry in GT-TAITherm including topics like multi-layer parts, surface properties, environment modeling including solar radiation and many more
• CFD Flow Field Mapping:
  • Requirements to CFD data to be used for CFD FFM
  • Modeling building in COOL3D/GEM3D using CFD data and export to GT-ISE
  • Using CFD data as flow solution in GT-ISE
  • Running simulations using CFD data
• Human Thermal Model:
  • Modeling of human in GT-TAITherm model
  • Including human in the simulation model
  • Running simulations including human thermal model

*If you intend to participate in both trainings (Basic and Advanced Cabin Modeling), please contact the instructor before registration. The regular fee will be $1300 and the university fee $700.

Online Cabin Modeling & Simulation (Basic)

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This 1-day class will introduce to cabin modeling and simulation in GT-SUITE. It will introduce the user to the three different levels of cabin modeling in GT-SUITE: Mono-Volume, Multi-Volume and 3D. For each level the model building process will be covered, and best simulation practices introduced. For the 3D cabin the thermal structure will be modelled in GT-TAITherm.

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

• Computer with GT-SUITE v2023 (the training will be conducted with v2023, but if you only have v2022 that is acceptable)
• Access to an active license
• Good internet connection
• Ideally two monitors/devices (although not required)
  • one to follow the instructor on the web meeting (web browser only)
  • one to use GT-SUITE for interactive model building

The class will consist primarily of interactive model building exercises. The following are the primary topics to be covered:

• Building a cabin air loop: Modeling of a cabin air loop including HVAC door, cabin blower, cabin heater and controls. Further the cabin air loop will be connected to an AC system.
• Mono-Volume cabin: Usage and calibration of a mono-volume cabin and integration into the cabin air loop
• Multi-Volume cabin: Usage and calibration of a multi-volume cabin and integration it into the cabin air loop
• 3D cabin:
  • 3D Model building in COOL3D/GEM3D and export to GT-ISE
  • 3D thermal structure model in GT-TAITherm (Note: The model building in GT-TAITherm is covered in the Cabin Modeling (Advanced) training)
  • Usage and calibration of the 3D cabin and integration into the cabin air loop

*If you intend to participate in both Trainings (Basic and Advanced Cabin Modeling), please contact the instructor before registration. The regular fee will be $1300 and the university fee $700.

Due to the limited capacity, seats will be allocated preferentially to commercial customers.

Online GT-SUITE Introduction training

This FREE 1-day class will introduce GT-SUITE to new users. The intention of this training is to provide an overview of different GT-domains and to teach the software handling.

This course will be conducted online via web meeting.

Learn the basics of GT-SUITE in this free course.  This class contains approximately 9 hours of instruction, spread over 2 half days.

Day 1 – Monday, 4th December – 13:00 – 17:30

Day 2 – Tuesday, 5th December– 08:30 – 13:00

To reserve your spot, you must have access to the following:

• • Computer with GT-SUITE v2023 (the training will be conducted with v2023, but if you only have v2022 that is acceptable)
  • Access to an active license
  • Good internet connection
  • Ideally two monitors/devices (although not required)
    • • one to follow the instructor on the web meeting (web browser only)
      • one to use GT-SUITE for interactive model building

The following topics will be covered in this class:

Introductory Concepts of GT-SUITE:

• 1-D Mechanical Simulation
• 1-D Thermal Simulation
• 1-D Flow Simulation
• Model Setup- initialization, parameter sweeps
• Controls
• Post-processing (GT-POST)
• Model organization & sharing
• Object libraries
• Optimization
  

Due to the limited number of seats, priority will be given to commercial clients.

Online Hydraulic Systems & Components

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This course will introduce engineers to the modeling of fuel injection and hydraulic components and complete hydraulic systems in GT-SUITE.  

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

• Computer with GT-SUITE v2023 (the training will be conducted with v2023, but if you only have v2022 that is acceptable)
• Access to an active license
• Good internet connection
• Ideally two monitors/devices (although not required)
  • one to follow the instructor on the web meeting (web browser only)
  • one to use GT-SUITE for interactive model building

The class will include discussions of simple to detailed, predictive component models in which the fluid-mechanical interaction is important. Most of the instructions will be based on interactive model building but may also include demonstrations from the instructor and guided examination/analysis of pre-built models. 

• Introduction to Flow Solution in GT-SUITE  

• Discretization of 1-D Models 
• Fluid Properties for modeling hydraulic circuits 
• Explanation of flow solvers used for different hydraulic tasks 

• Modeling hydraulic and injection components: create detailed, predictive models of hydraulic components in which the fluid-mechanical interaction is important. Examples of the components to be discussed include high pressure pumps, pressure control valves, injectors, etc. Pressure pulsation will also be analyzed. 
• Modeling pumps: discussion of different levels of models as well as the different types of pumps. 

• Modeling a hydraulic system: build a model of the full system. Various levels of detail for modeling the hydraulic components (pumps, valves, etc.) will be discussed, ranging from imposing the behavior to predicting it. 
• Modeling of control parts interacting with hydraulic components

Due to the limited number of seats, priority will be given to commercial customers.

 

Online Predictive Friction for Cranktrain

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

• Computer with GT-SUITE v2023 (the training will be conducted with v2023, but if you only have v2022 that is acceptable)
• Access to an active license
• Good internet connection
• Ideally two monitors/devices (although not required)
  • one to follow the instructor on the web meeting (web browser only)
  • one to use GT-SUITE for interactive model building

The following topics will be covered during this 2-day class:

Class will focus on the sub-systems that play a major part in terms of overall mechanical power losses of an engine. The participants will learn how to set these systems up, how to investigate different designs/parameters and how to put everything in context. The topics that will be covered in detail are: 

Basic Concepts of Friction Modeling in GT-SUITE: 

• Components and Reference Objects like Surfaces/Coatings, Oil Properties etc. 

Crankshaft Analysis 

• Journal Bearing Modeling in detailed level (from map-based solution to EHD Bearings)
• Seals and other Losses (TVD) 
  

Piston-Group Dynamics 

• Piston Rings Design 
• Compliant Piston Skirt to Liner Model incl. Extraction of Stiffness Matrices 

Evaluation of Results 

• Calibration of results vs. measured data 
• Results in context of vehicle driving cycle 
• Introduction into concepts on how to optimize different quantities such as fuel consumption 

If time permits, extra and more specialized topics may be covered. The topics will be selected by the participants. Some possible topics are: Blowby and Oil Evaporation, user-supplied. 

*If you intend to participate in both Trainings (Basic and Friction Modeling), please contact the instructor before registration. The regular fee will be $1300 and the university fee $700. 

Due to the limited room capacity, seats will be allocated preferentially to commercial customers.

 

Online Cranktrain Modeling

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

• Computer with GT-SUITE v2023 (the training will be conducted with v2023, but if you only have v2022 that is acceptable)
• Access to an active license
• Good internet connection
• Ideally two monitors/devices (although not required)
  • one to follow the instructor on the web meeting (web browser only)
  • one to use GT-SUITE for interactive model building

This 2-day class is designed for those interested in Cranktrain modeling and analysis in GT-SUITE. It will focus on the simulation of engine cranktrain dynamics through the use of GT-SUITE. The following topics will be covered: 

Rigid Crankshaft Analysis 

• Crankshaft Balancing 
• Cylinder Pressure Boundary Conditions Applied 

Crankshaft Torsional Analysis 

• Time Domain Solution with Steady State Convergence 
• Frequency Domain Solutions (Free and Forced) 

Crankshaft Quasi-Static and Dynamic Bending Solution 

• Fillet Stress Calculations Based on Dynamic Loading 
• Coupled Journal Bearing Solution 

If time permits, extra and more specialized topics may be covered. The topics will be selected by the participants. Some possible topics are: Block Vibration, Accessory Belt Drive Modeling,  Integrated Simulations (e.g. cranktrain + valvetrain, cranktrain + drivetrain), Transient simulations, user-supplied. 

*If you intend to participate in both Trainings (Basic and Friction Modeling), please contact the instructor before registration. The regular fee will be $1300 and the university fee $700. 

Due to the limited room capacity, seats will be allocated preferentially to commercial customers.

 

Online GT-DRIVE+: xEV Modeling

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This class is intended for those interested in developing Hybrid Electric Vehicle or pure Electric Vehicle models for fuel economy or range studies.

This course will be conducted online via web meeting. To reserve your spot, you must have access to the following:

• • Computer with GT-SUITE v2023 (the training will be conducted with v2023, but if you only have v2022 that is acceptable)
  • Access to an active license
  • Good internet connection
  • Ideally two monitors/devices (although not required)
    • one to follow the instructor on the web meeting (web browser only)
    • one to use GT-SUITE for interactive model building

The following topics will be covered in this class:

Introductory Concepts of GT-SUITE:

• 1-D Mechanical Simulation
• Model Setup- initialization, parameters sweep, Optimization/Design of Experiments
• Post-processing (GT-POST)
• Subassemblies: internal, external, encryption of subassemblies

The following vehicle modeling topics will be included:

• Conventional Driveline Components
  • Map based Engine Model
  • Transmissions (Automatic, Manual, CVT, Other)
• Electric Driveline Components
  • Battery
  • Electric Motors
• Controls
  • Vehicle Driver
  • Low level Controllers
• Supervisory Control Strategies
• Application of Energy efficient Management Strategies
  • ECMS
  • Dynamic Programing
• Driving Cycle Analysis (with Model Based Targeting Controller)

Due to the limited number of seats, priority will be given to commercial clients.

 

Online GT-SUITE Introduction Training

This FREE course will introduce GT-SUITE to new users. The course will be two half-days with a break from approximately 1-2 CST.

The intention of this training is to teach handling of the software to enable users to build models and post-process results. This is demonstrated through hands-on exercises with relatively simple models in the flow, mechanical, and thermal domains.

The focus is not on those specific models or domains, but rather learning the software usage. Therefore, this course is recommended for anyone interested in using GT-SUITE, regardless of their specific application. Additional classes are available on the following day(s) which will build upon the material in this course and cover more details on specific applications.

This course will be conducted online via web meeting. A link will be e-mailed to you in the week prior to the class.

To reserve your spot, you must have access to the following:

• Computer with GT-SUITE v2023 (the training will be conducted with v2023, but if you only have v2022 that is acceptable)
• Access to an active license
• Good internet connection
• Ideally two monitors/devices (although not required)
  • one to follow the instructor on the web meeting (web browser only)
  • one to use GT-SUITE for interactive model building

Introductory Concepts of GT-SUITE:

• Model Building (GT-ISE)
• Model Setup: initialization, parameter sweeps
• Controls
• Post-processing (GT-POST)
• Model organization & sharing
• Object libraries
• Optimization

Due to the limited number of seats, priority will be given to commercial customers.

 

Online Heat Distribution Modeling – Electric Powertrain (E-Machine)

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This 1,5-day class will introduce the use of GT-SUITE software for modeling the distribution of heat within components of the electric powertrain, specifically electric motors.

Day 1 – Wednesday, 08th November, – 09:00 – 17:00

Day 2 – Thursday, 09th November – 09:00 – 13:00

Electric motor heat distribution models allow the prediction of heat rejection to coolant and/or oil at any operating condition and may be used to study concepts for temperature reduction in the motor as well as defining optimal strategies for the motor control. The class is targeted towards engineers with responsibility for e-components cooling or total vehicle energy management. This class will cover the process of building and calibrating e-components heat distribution models, beginning from CAD data. The process involves significant use of the 3D pre-processing tools of GT-SUITE (GEM3D and GT-SpaceClaim).

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

• Computer with GT-SUITE v2023
  
• Access to an active license
• Good internet connection
• Ideally two monitors/devices (although not required)
  • one to follow the instructor on the web meeting (web browser only)
  • one to use GT-SUITE for interactive model building

The following are the primary topics to be covered:

• Conversion of CAD Data for electric motor
• Building up complete model in GEM3D (FE-components) and export to GT-ISE
• Advanced treatment of winding anisotropy and spray cooling
• Steady state thermal analysis
• Switch to 1D lumped mass approach and model calibration for transient analysis

Due to the limited number of seats, priority will be given to commercial clients.

Online Fuel Cell

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This 1-day class will introduce the use of GT-SUITE for modeling of fuel cell stacks and systems. This course is targeted towards engineers responsible for fuel cell sizing, performance modeling, and balance of plant systems design.

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

• Computer with GT-SUITE v2023 (the training will be conducted with v2023 only)
• Access to an active license
• Good internet connection
• Ideally two monitors/devices (although not required)
  • one to follow the instructor on the web meeting (web browser only)
  • one to use GT-SUITE for interactive model building

This class will consist of a mix of presentations and interactive model building exercises. The following are the primary topics to be covered:

• Electrochemical Modeling of Fuel Cells Stacks with GT-SUITE: The fundamentals behind electrochemical modeling will be taught and participants will gain experience in building a stack model and calibrating it against measurement data.
• Modeling a Balance of Plant System: The participant will learn how to build a model of the full fuel cell system including:
  • Hydrogen Tank and Circulation
  • Air Compression and Humification
  • Cooling System
  • Stoichiometry control
• Integration with Vehicle System Models: The participant will learn how a fuel cell system may be integrated with vehicle level models to accomplish transient vehicle drive cycle analyses, range prediction, or vehicle performance analyses.

Due to the limited number of seats, priority will be given to commercial clients.

Online Underhood Airflow Modeling

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This 1-day class will introduce the use of the COOL3D pre-processing tool for modeling the underhood airflow. The focus of this class is on the airflow in the underhood compartment and heat exchanger performance calculations. The class is targeted towards engineers with responsibility for vehicle thermal management, or for those who are responsible for specifying underhood components (heat exchangers, fans, etc.).

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

• Computer with GT-SUITE v2023 (the training will be conducted with v2023, but if you only have v2022 that is acceptable)
• Access to an active license
• Good internet connection
• Ideally two monitors/devices (although not required)
  • one to follow the instructor on the web meeting (web browser only)
  • one to use GT-SUITE for interactive model building

The class will consist primarily of interactive model building exercises. The following are the primary topics to be covered:

• Building the underhood model in COOL3D: The participant will learn how to build and export a predictive quasi-3D model of the underhood compartment within the COOL3D tool, including grilles, bumpers, radiator, charge air cooler, A/C condenser, fan, fan shroud, and engine block.
• Running the GT-SUITE underhood model: The participant will learn how to define boundary conditions to run a steady state underhood analysis within GT-SUITE. The use of COOL3D to evaluate different design alternatives will be discussed.
• Integration with Cooling/Engine/Vehicle models: The participant will understand the capabilities of GT-SUITE to integrate underhood models created within COOL3D into larger system level simulations that may include cooling, engine, and vehicle systems.

Due to the limited number of seats, priority will be given to commercial clients.

Online HVAC System Modeling & Simulation

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This 1-day class will introduce the use of GT-SUITE software for modeling of air conditioning or heat pump systems, including the refrigerant circuit, HVAC ducting, and cabin. The class is targeted towards engineers with responsibility for design and analysis of A/C systems, or for those who are responsible for overall vehicle energy management including an A/C system.

The class will consist primarily of interactive model building exercises.

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

• • Computer with GT-SUITE v2023
  • Access to an active license
  • Good internet connection
  • Ideally two monitors/devices (although not required)
    • one to follow the instructor on the web meeting (web browser only)
    • one to use GT-SUITE for interactive model building

The following are the primary topics to be covered:

• Modeling the refrigerant flow network:Basic flow system modeling and discretization concepts, usage of GEM3D for flow systems modeling.
• Modeling A/C system components:Building and calibration of the basic components of A/C systems, such as compressor, receiver/dryer, thermal expansion valve, and heat exchangers. Usage of COOL3D pre-processing tool to build and automatically discretize more complex scenarios (non-uniform inlet air flow, for example).
• Assembling the complete A/C system model for system level calculations:Assembling the refrigerant flow network and A/C components into a complete model of the A/C system. Steady state and transient system analysis. GT-POST post-processing tool for analysis of results.
• Modeling air circuits:Modeling of the HVAC ducting and the blower.
• Modeling the vehicle cabin:Different levels of modeling detail available for modeling the cabin within GT-SUITE.
• Integration with Cooling/Engine/Vehicle models:Introduction of integrating the A/C system models into vehicle system level simulations including cooling, engine, and driveline systems. Cabin pulldown transient simulations, transient drive cycle analysis for fuel economy/energy management (i.e. US EPA SC03 cycle).

Due to the limited number of seats, priority will be given to commercial clients.

Online GT-SUITE Introduction Training

This FREE 1-day class will introduce GT-SUITE to new users. The intention of this training is to provide an overview of different GT-domains and to teach the software handling.

This course will be conducted online via web meeting.

Learn the basics of GT-SUITE in this free course.  This class contains approximately 9 hours of instruction, spread over 2 half days.

Day 1 – Monday, 6th November – 13:00 – 17:30

Day 2 – Tuesday, 7th November– 08:30 – 13:00

To reserve your spot, you must have access to the following:

• • Computer with GT-SUITE v2023 (the training will be conducted with v2023, but if you only have v2022 that is acceptable)
  • Access to an active license
  • Good internet connection
  • Ideally two monitors/devices (although not required)
    • • one to follow the instructor on the web meeting (web browser only)
      • one to use GT-SUITE for interactive model building

The following topics will be covered in this class:

Introductory Concepts of GT-SUITE:

• 1-D Mechanical Simulation
• 1-D Thermal Simulation
• 1-D Flow Simulation
• Model Setup- initialization, parameter sweeps
• Controls
• Post-processing (GT-POST)
• Model organization & sharing
• Object libraries
• Optimization
  

Due to the limited number of seats, priority will be given to commercial clients.

GTTC ’24 [GT Technical Conference] | India

Save the Date!

Gamma Technologies is excited to host the 2024 India GTTC (GT Technical Conference) in person on February 5,6 2024 at Hyatt Regency, Viman Nagar, Pune. This free two-day event will feature more than 25 presentations from leading organizations on how they achieve their ground-breaking work using GT-SUITE.

Check out the final agenda here 2024 GTTC Agenda, which includes presentation sessions from leaders such as Mahindra, Cummins, Tata Motors, OLA Electric, Copeland and more!

DAY 1 | Conference Presentation Day | MONDAY, FEB 5th
The conference begins on Monday February 5th with a keynote followed by presentations from GT-SUITE expert users. These presentations address industry challenges in many applications such as electrification, thermal management, NVH, engine modeling and more!

DAY 2 | Conference  Seminar Day | TUESDAY, FEB 6th
Choose from 8 different seminar tracks based on your area of interest.

These include:

• Vehicle Multi-physics Systems Integration and Optimization
• Battery Modeling- Cell Focus
• Battery Modeling: Multi-Physics Integration Focus
• Thermal Management for xEVs system and Component Safety
• Electric Powertrain Design and Analysis
• Future Directions in Engine Performance Modeling
• Leveraging Machine Learning (ML) for System Simulation
• Fuel Cell and Hydrogen Systems Integration and Optimization

Online Heat Distribution Modeling – Electric Powertrain (E-Machine)

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This class will introduce the use of GT-SUITE software for modeling the distribution of heat within components of the electric powertrain, specifically electric motors.

Electric motor heat distribution models allow the prediction of heat rejection to coolant and/or oil at any operating condition and may be used to study concepts for temperature reduction in the motor as well as defining optimal strategies for the motor control. The class is targeted towards engineers with responsibility for e-components cooling or total vehicle energy management. This class will cover the process of building and calibrating e-components heat distribution models, beginning from CAD data. The process involves significant use of the 3D pre-processing tools of GT-SUITE (GEM3D and GT-SpaceClaim). 

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

• Computer with GT-SUITE v2023 (the training will be conducted with v2023, but if you only have v2022 that is acceptable)
• Access to an active license
• Good internet connection
• Ideally two monitors/devices (although not required)
  • one to follow the instructor on the web meeting (web browser only)
  • one to use GT-SUITE for interactive model building

The following are the primary topics to be covered: 

• Conversion of CAD Data for electric motor 
• Building up complete model in GEM3D (lumped thermal model and FE-components) and export to GT-ISE  
• Calibration of flow distribution & heat transfer 

• Integration of flow/thermal model into complete thermal management models 
• Link of thermal/flow model to electric circuits 

Due to the limited room capacity, seats will be allocated preferentially to commercial customers.

Online Valvetrain Modeling (Advanced)

This class is designed for users with previous experience in GT-SUITE Valvetrain Applications. It will focus on the simulation of special engine valvetrains topics through the use of GT-SUITE.

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

• Computer with GT-SUITE v2023 (the training will be conducted with v2023, but if you only have v2022 that is acceptable)
• Access to an active license
• Good internet connection
• Ideally two monitors/devices (although not required)
  • one to follow the instructor on the web meeting (web browser only)
  • one to use GT-SUITE for interactive model building

The following topics will be covered: 

Dynamic correlation 

• Typical measurements 
• Recommended correlation procedures 

Springs 

• Comparison of Eigenfrequencies, Fatigue 
• Preview of new feature outputs 

Tribology 

• Hertzian Stress and Film models 
• Key roughness inputs 
• Detailed stress analysis 
• Roller crown shaping 

Camshaft 

• Estimating Seal data 
• Bending effects 

Bearings 

• Simplified GT models
• Detailed HD models 
• Defining odd feed geometries 
• EHD (Elasto-Hydrodynamics) 

HLA (Hydraulic Lash Adjuster) 

• Simple GT model calibration 
• Detailed flow model, breakdown and topology changes (relief valve) 

Each application will be attended by small exercises to cover a broad range of applications. If time permits, more specialized topics, including timing drives and engine performance integration, may be covered as requested by participants.

*If you intend to participate in both Trainings (Basic and Advanced Valvetrain Modeling), please contact the instructor before registration. The regular fee will be $1300 and the university fee $700.

Due to the limited number of seats, priority will be given to commercial customers.

Online Valvetrain (Basic)

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training. 

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

• Computer with GT-SUITE v2023 (the training will be conducted with v2023, but if you only have v2022 that is acceptable)
• Access to an active license
• Good internet connection
• Ideally two monitors/devices (although not required)
  • one to follow the instructor on the web meeting (web browser only)
  • one to use GT-SUITE for interactive model building

This class is designed for new users of GT-SUITE Valvetrain Application. It will focus on the simulation of engine valvetrains through the use of VTDESIGN and GT-SUITE. There will also be an introduction to the new ValvetrainDesign interface in GT-SUITE. The following topics will be covered: 

Cam Design (CamDesignHSpline)

• Develop a profile design starting from an existing reference profile

Detailed helical spring model (SpringGeomFE)

Valvetrain mechanism kinematics (ValvetrainDesign) and quasi-dynamic (QDA) analysis

• Generate valve lift from cam shape or vice-versa
• Calculate idealized separation speed  (or Spring Margin)

Dynamic modeling of valvetrains

• Modeling Contacts for Hertz Pressure and Oil Film Calculations
• Adding Compliance to Valvetrain Components
• Adding hydraulic lash adjuster (HLA) to the valvetrain branch and applying boundary conditions (cylinder/port pressure, torque, etc.)

If time permits, more specialized topics may be covered as requested by participants.  Some possible topics are: Cam Phasers, Variable Valve actuation, Transient simulations, CamDesign Optimization or user-supplied suggestions.

*If you intend to participate in both Trainings (Basic and Advanced Valvetrain Modeling), please contact the instructor before registration. The regular fee will be $1300 and the university fee $700. 

Due to the limited number of seats, priority will be given to commercial customers.

 

Online Optimization, Machine Learning, and Design of Experiments

This class is intended for experienced users or users who participate in this free-of-charge Introduction Training.

This class is intended for GT-SUITE users interested in enhancing their productivity by learning how to use the optimization tools included in the software.

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

• Computer with GT-SUITE v2023 (the training will be conducted with v2023, but if you only have v2022 that is acceptable)
• Access to an active license
• Good internet connection
• Ideally two monitors/devices (although not required)
  • one to follow the instructor on the web meeting (web browser only)
  • one to use GT-SUITE for interactive model building

The class will cover setup, execution, and post-processing of the GT-SUITE Optimizer and machine learning capabilities (Design of Experiments tool).  Simple exercises will be included. The following topics will be discussed in detail:

• GT-SUITE Optimizer
  • Optimization search algorithms
  • Multi-objective optimizations
  • Case-sweep optimization
  • Using with distributed computing
• Machine Learning
  • Design space sampling with DOE Setup
  • Using the DOE post-processor
  • Creating and exporting metamodels
  • Monte Carlo DOE sampling and variability analysis

Due to the limited room capacity, seats will be allocated preferentially to commercial customers.

 

Online HVAC System Modeling & Simulation

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This class will introduce the use of GT-SUITE software for modeling of air conditioning or heat pump systems, including the refrigerant circuit, HVAC ducting, and cabin. The class is targeted towards engineers with responsibility for design and analysis of A/C systems, or for those who are responsible for overall vehicle energy management including an A/C system. 

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

• Computer with GT-SUITE v2022 (the training will be conducted with v2022, but if you only have v2021 that is acceptable)
• Access to an active license
• Good internet connection
• Ideally two monitors/devices (although not required)
  • one to follow the instructor on the web meeting (web browser only)
  • one to use GT-SUITE for interactive model building

The class will consist primarily of interactive model building exercises. The following are the primary topics to be covered: 

• Modeling the refrigerant flow network: Basic flow system modeling and discretization concepts, usage of GEM3D for flow systems modeling. 
• Modeling A/C system components: Building and calibration of the basic components of A/C systems, such as compressor, receiver/dryer, thermal expansion valve, and heat exchangers. Usage of COOL3D pre-processing tool to build and automatically discretize more complex scenarios (non-uniform inlet air flow, for example). 
• Assembling the complete A/C system model for system level calculations: Assembling the refrigerant flow network and A/C components into a complete model of the A/C system. Steady state and transient system analysis. GT-POST post-processing tool for analysis of results. 
• Modeling air circuits: Modeling of the HVAC ducting and the blower. 
• Modeling the vehicle cabin: Different levels of modeling detail available for modeling the cabin within GT-SUITE. 

• Integration with Cooling/Engine/Vehicle models: Introduction of integrating the A/C system models into vehicle system level simulations including cooling, engine, and driveline systems. Cabin pulldown transient simulations, transient drive cycle analysis for fuel economy/energy management (i.e. US EPA SC03 cycle).

Due to the limited room capacity, seats will be allocated preferentially to commercial customers.

 

Online GT-SUITE Introduction Training

This FREE course will introduce GT-SUITE to new users. The course will be two half-days with a break from approximately 1-2 CST.

The intention of this training is to teach handling of the software to enable users to build models and post-process results. This is demonstrated through hands-on exercises with relatively simple models in the flow, mechanical, and thermal domains.

The focus is not on those specific models or domains, but rather learning the software usage. Therefore, this course is recommended for anyone interested in using GT-SUITE, regardless of their specific application. Additional classes are available on the following day(s) which will build upon the material in this course and cover more details on specific applications.

This course will be conducted online via web meeting. A link will be e-mailed to you in the week prior to the class.

To reserve your spot, you must have access to the following:

• Computer with GT-SUITE v2023 (the training will be conducted with v2023, but if you only have v2022 that is acceptable)
• Access to an active license
• Good internet connection
• Ideally two monitors/devices (although not required)
  • one to follow the instructor on the web meeting (web browser only)
  • one to use GT-SUITE for interactive model building

Introductory Concepts of GT-SUITE:

• Model Building (GT-ISE)
• Model Setup: initialization, parameter sweeps
• Controls
• Post-processing (GT-POST)
• Model organization & sharing
• Object libraries
• Optimization

Due to the limited number of seats, priority will be given to commercial customers.

 

Blackjack Night

For Conference Attendees only. Come join us for “Casino Night”! Food, drinks, and fun at the Blackjack tables and other casino attractions.

Register for this event with the GTTC ’23 [GT Conference] | EUROPE

Get Together

Kick off the conference with a relaxing evening of drinks with friends and GT staff at our get together.

Register for this event with the GTTC ’23 [GT Conference] | EUROPE

Chemistry Focus

Register for this seminar with our GT Conference 2023 | USA

Discover advanced aftertreatment modeling, engine integration, and innovative approaches to fuel reformers and carbon capture. Engage with experts, expand your network, and be at the forefront of cleaner and sustainable transportation solutions. Don’t miss this opportunity to shape the future of exhaust aftertreatment and chemical systems. Join us and unlock new possibilities in engineering. 

Engage with industry experts and researchers, fostering meaningful discussions and collaboration opportunities. Expand your professional network and stay at the forefront of exhaust aftertreatment and chemical systems modeling. 

In this seminar you will learn about 

• New Features 
• Aftertreatment and Chemical Systems analysis 
• Reaction Mechanism Calibration by Optimization  

• Advanced aftertreatment modeling 
• Engine & Aftertreatment Integration  
• Fuel Reformers, Carbon Capture, and Fuel Synthesis 

using GT-SUITE and GT-xChem  

Engine Focus

Register for this seminar with our GT Conference 2023 | USA

Gain insights into key areas, including combustion modeling, real-time performance and emissions analysis, net-zero carbon fuel modeling, and the deployment and evolution of real-time models. 

Discover cutting-edge techniques and methodologies driving predictive modeling and simulation for engine performance. Uncover innovations in combustion modeling, optimizing efficiency and reducing emissions. Explore real-time analysis, enabling immediate performance assessment and emission control. Dive into net-zero carbon fuel modeling, paving the way for sustainable engine technologies. 

Explore the deployment, democratization, and evolution of engine performance models, enabling widespread access and continuous improvement. Connect with industry experts, researchers, and innovators, fostering collaboration and expanding your professional network. 

In this seminar we you will learn about  

• New Features 
• Combustion Modeling 
• Real time performance and emission

• Net Zero Carbon Fuel Modeling  
• Deployment, Democratization & Evolution 
• Real time model deployment 

using GT-SUITE, GT-POWER xRT,  ACT,  GT-Play. 

 

Fluids Focus

Register for this seminar with our GT Conference 2023 | USA

Immerse yourself in the world of cutting-edge engineering as we explore the power of simulation. Delve into the intricacies of positive displacement pumps and compressors, understanding their vital role in various industries, for decarbonization. Discover how simulation techniques enhance the design and optimization of these systems, allowing for improved performance, efficiency, and reliability. Uncover the latest advancements in model building, performance and multibody simulations. Explore how simulation-driven development enables accurate prediction of fluid flow, pressure pulsation, gas and structure temperature, and other critical factors, leading to more robust and cost-effective designs. Connect with industry experts, share insights, and expand your professional network. Collaborate with like-minded professionals and gain invaluable knowledge to stay at the forefront of simulation-enhanced product development. 

In this seminar we you will learn about  

• New Features 
• Predictive Positive Displacement Compressor & Pump 
• Deployment & Democratization 

• 3D Geometry based model development for fluid systems 
• Multi body dynamics of pumps and compressors 
• Fluids system Optimization  

using GT-SUITE, GT-Automation and GT-Play. 

Mechanical Systems Focus

Register for this seminar with our GT Conference 2023 | USA

Explore the intricate dynamics of mechanical systems that drive powertrains and vehicles, gaining a comprehensive understanding of their behavior, including noise, vibration, and harshness (NVH). Delve into the interplay between various components, optimizing performance, efficiency, and reliability while ensuring a smooth and comfortable driving experience. Gain insights into powertrain dynamics, studying the interactions between engines, transmissions, and drivetrain systems to minimize NVH levels. Connect with industry visionaries, expand your professional network, and become a driving force in the future of transportation. Join us for this enlightening seminar, where you will deepen your knowledge, engage with experts, and shape the future of mechanical dynamics and NVH in powertrain and vehicle systems. Don’t miss this unparalleled opportunity to make a lasting impact in the field. 

In this seminar you will learn about  

• New Features 
• Engine Mechanics 
• Gearbox Noise Vibration and Harshness

• Automation of simulation and analysis in mechanics applications 
• Vehicle Dynamics in 3D 
• Integration of powertrain performance models 

using GT-SUITE and GT-3D MBD 

Fuel Cell Focus

Register for this seminar with our GT Conference 2023 | USA

Don’t miss this empowering opportunity to delve into the depths of physics and be at the forefront of Fuel Cell and Hydrogen Systems Integration and Optimization, shaping the future of hydrogen mobility and a greener tomorrow. Lets’s discuss cutting-edge technologies driving the future of transportation and delve into the deep physics behind fuel cell and hydrogen systems. Gain a comprehensive understanding of the intricate interplay between various components, optimizing their integration for seamless operation and enhanced performance. Uncover the immense potential of hydrogen as a clean and sustainable energy source, revolutionizing the way we move and reducing our carbon footprint. 

In this seminar you will learn about  

• New Features 
• Fuel cell and stack design   
• Efficient fuel cell plant model creation  

• Vehicle & Controls Integration  
• Water Management in fuel cells 
• Electrolysis & Hydrogen Infrastructure 

using GT-SUITE. 

Thermal Management Focus

Register for this seminar with our GT Conference 2023 | USA

Explore the complexities of thermal distribution and security in both 1D and 3D environments, gaining valuable insights into optimizing performance and safety. Gain a deep understanding of how thermal management impacts the efficiency and reliability of xEVs. Uncover the latest advancements in AC & Heat Pump Systems, ensuring effective temperature control for enhanced comfort and energy efficiency. Discover the seamless integration of vehicles and controls, harnessing the power of intelligent systems for optimal xEV operation. Lastly, dive into the realm of Cooling Systems, exploring innovative approaches to safeguard components and maintain optimal operating temperatures. 

In this seminar you will learn about  

• New Features 
• Efficient model generation and maintenance 
• Thermal distribution and security in 1D and 3D  

• AC & Heat Pump Systems 
• Vehicle & Controls Integration  
• Cooling Systems 

using GT-SUITE and GT-SUITE RT 

E-Powertrain Focus

Register for this seminar with our GT Conference 2023 | USA

Dive deep into the intricacies of electric propulsion systems, unraveling the secrets behind their design and optimizing their performance. Gain a comprehensive understanding of powertrain efficiency as you discover innovative approaches to inverter and e-motor integration. Connect with industry visionaries, expand your professional network, and become a driving force in the future of transportation. 

In this seminar you will learn about  

• Electric Machine Design & Analysis  
• Inverter Design & Analysis  
• E-Powertrain Benchmarking  

• Thermal Derating in E-Powertrains 
• E-Powertrain Noise Vibration and Harshness 
• Integrated E-Powertrain Optimization 

using GT-SUITE, GT-FEMAG and GT-POWERFORGE 

Battery Focus

Register for this seminar with our GT Conference 2023 | USA

Discover the fascinating world of battery technologies and gain insights into the intricate interplay of multiple physical phenomena. Delve into the realm of modeling and simulation, equipping yourself with the tools to accurately predict battery performance. Expand your expertise, network with industry leaders, and pave the way for innovative advancements in the field. 

In this seminar you will learn about  

• New Features 
• Real-World battery aging 
• Real time and controls focused battery modeling 

• Machine learning for fast, integrated battery modeling 
• Detailed Cell Analysis with in 3D 
• Modeling and preventing thermal runaway 

using GT-SUITE, GT-Autolion RT, GT-Autolion 1D and GT-Autolion 3D. 

Vehicle Systems Focus

Register for this seminar with our GT Conference 2023 | USA

Unlock the power of vehicle multi-physics systems integration and optimization! Join our seminar to delve into the realm of cutting-edge technology and discover the art of harmonizing diverse components for enhanced performance. Get motivated, gain insights, and propel your understanding of this exciting field forward. Don’t miss out on the opportunity to drive innovation and revolutionize the future of automotive engineering using GT-SUITE. 

In this seminar you will learn about  

• New Features 
• XiL Basics 
• Real World Driving Scenarios 

• XEV Controls Optimization 
• Thermal Subsystem Integration 
• Architecting Modular Models  

using GT-SUITE, GT-RealDrive and GT-Autolion. 

Chemistry Focus

Register for this seminar with our GT Conference 2023 | EUROPE

Discover advanced aftertreatment modeling, engine integration, and innovative approaches to fuel reformers and carbon capture. Engage with experts, expand your network, and be at the forefront of cleaner and sustainable transportation solutions. Don’t miss this opportunity to shape the future of exhaust aftertreatment and chemical systems. Join us and unlock new possibilities in engineering. 

Engage with industry experts and researchers, fostering meaningful discussions and collaboration opportunities. Expand your professional network and stay at the forefront of exhaust aftertreatment and chemical systems modeling. 

In this seminar you will learn about 

• New Features 
• Aftertreatment and Chemical Systems analysis 
• Reaction Mechanism Calibration by Optimization  

• Advanced aftertreatment modeling 
• Engine & Aftertreatment Integration  
• Fuel Reformers, Carbon Capture, and Fuel Synthesis 

using GT-SUITE and GT-xChem  

Engine Focus

Register for this seminar with our GT Conference 2023 | EUROPE

Gain insights into key areas, including combustion modeling, real-time performance and emissions analysis, net-zero carbon fuel modeling, and the deployment and evolution of real-time models. 

Discover cutting-edge techniques and methodologies driving predictive modeling and simulation for engine performance. Uncover innovations in combustion modeling, optimizing efficiency and reducing emissions. Explore real-time analysis, enabling immediate performance assessment and emission control. Dive into net-zero carbon fuel modeling, paving the way for sustainable engine technologies. 

Explore the deployment, democratization, and evolution of engine performance models, enabling widespread access and continuous improvement. Connect with industry experts, researchers, and innovators, fostering collaboration and expanding your professional network. 

In this seminar we you will learn about  

• New Features 
• Combustion Modeling 
• Real time performance and emission

• Net Zero Carbon Fuel Modeling  
• Deployment, Democratization & Evolution 
• Real time model deployment 

using GT-SUITE, GT-POWER xRT,  ACT,  GT-Play. 

 

Battery Focus

Register for this seminar with our GT Conference 2023 | EUROPE

Discover the fascinating world of battery technologies and gain insights into the intricate interplay of multiple physical phenomena. Delve into the realm of modeling and simulation, equipping yourself with the tools to accurately predict battery performance. Expand your expertise, network with industry leaders, and pave the way for innovative advancements in the field. 

In this seminar you will learn about  

• New Features 
• Real-World battery aging 
• Real time and controls focused battery modeling 

• Machine learning for fast, integrated battery modeling 
• Detailed Cell Analysis with in 3D 
• Modeling and preventing thermal runaway 

using GT-SUITE, GT-Autolion RT, GT-Autolion 1D and GT-Autolion 3D. 

Fluids Focus

Register for this seminar with our GT Conference 2023 | EUROPE

Immerse yourself in the world of cutting-edge engineering as we explore the power of simulation. Delve into the intricacies of positive displacement pumps and compressors, understanding their vital role in various industries, for decarbonization. Discover how simulation techniques enhance the design and optimization of these systems, allowing for improved performance, efficiency, and reliability. Uncover the latest advancements in model building, performance and multibody simulations. Explore how simulation-driven development enables accurate prediction of fluid flow, pressure pulsation, gas and structure temperature, and other critical factors, leading to more robust and cost-effective designs. Connect with industry experts, share insights, and expand your professional network. Collaborate with like-minded professionals and gain invaluable knowledge to stay at the forefront of simulation-enhanced product development. 

In this seminar we you will learn about  

• New Features 
• Predictive Positive Displacement Compressor & Pump 
• Deployment & Democratization 

• 3D Geometry based model development for fluid systems 
• Multi body dynamics of pumps and compressors 
• Fluids system Optimization  

using GT-SUITE, GT-Automation and GT-Play.