Speak to an Expert
Speak to an Expert

Fluid Systems and Positive Displacement Pumps and Compressors

Register for this seminar with our GT Conference 2024 | EU

Immerse yourself in the world of cutting-edge engineering as we explore the power of simulation. Delve into the intricacies of high-fidelity fluid simulation and positive displacement pumps and compressors, understanding their vital role in various industries, for decarbonization. Discover how simulation techniques enhance the design and optimization of these systems, allowing for improved performance, efficiency, and reliability. Uncover the latest advancements in model building, performance and multibody simulations. Explore how simulation-driven development enables accurate prediction of fluid flow, pressure pulsation, gas and structure temperature, and other critical factors, leading to more robust and cost-effective designs. Connect with industry experts, share insights, and expand your professional network. Collaborate with like-minded professionals and gain invaluable knowledge to stay at the forefront of simulation-enhanced product development. 

In this seminar we you will learn about  

  • Advancements in system driven fluid simulations 
  • Predictive positive displacement compressors and pumps 
  • Machine learning for predictive maintenance and fault detection
  • Flow and acoustics simulation for component design and characterization  
  • Multi body dynamics of pumps and compressors using GT-SUITE

Open Discussion on Fuel Cell, Electrolysis, & Hydrogen

Register for this seminar with our GT Conference 2024 | EU

Don’t miss this empowering opportunity to delve into the depths of physics and be at the forefront of Fuel Cell and Hydrogen Systems Integration and Optimization, shaping the future of hydrogen mobility and a greener tomorrow. Lets’s discuss cutting-edge technologies driving the future of transportation and delve into the deep physics behind fuel cell and hydrogen systems. Gain a comprehensive understanding of the intricate interplay between various components, optimizing their integration for seamless operation and enhanced performance. Uncover the immense potential of hydrogen as a clean and sustainable energy source, revolutionizing the way we move and reducing our carbon footprint. 

In this seminar you will learn about:

  • Best Practices for Fuel Cell and Stack Design 
  • Fuel Cell Degradation Analysis 
  • Machine Learning and Controls Integration in FCEV Models 
  • Water and ICE Management in PEM Fuel Cell Stack Systems 
  • Fundamentals and Advancements in Electrolysis and Hydrogen Infrastucture Modeling using GT-SUITE and Machine Learning Assistant  

Mechanical Dynamics of Powertrain and Vehicle

Register for this seminar with our GT Conference 2024 | EU

Explore the intricate dynamics of mechanical systems that drive powertrains, accessories, and vehicles, gaining a comprehensive understanding of their behavior, including noise, vibration, and harshness (NVH), Friction and Tribology. Explore the interplay between various components, optimizing performance, efficiency, and reliability while ensuring a smooth and comfortable driving experience. Gain insights into powertrain dynamics, studying the interactions between engines, electric machines, and drivetrain systems to minimize NVH levels. Join us for this insightful seminar, where you will deepen your knowledge, engage with experts, and shape the future of mechanical dynamics in powertrain and vehicle systems. Don’t miss this opportunity to make a lasting impact in the field.   

In this seminar you will learn about:

  • Powertrain Mechanics, Friction and Tribology 
  • Gearbox and E-Axle NVH 
  • Multi body dynamics of Pumps and Compressors 
  • Metamodeling for Pre-CAE Concept Design 
  • Vehicle Dynamics in 3D using GT-SUITE and GT-3D MBD 

Thermal Management Throughout the Development Cycle

Register for this seminar with our GT Conference 2024

Explore the complexities of thermal distribution and security in both 1D and 3D environments, gaining valuable insights into optimizing performance and safety. Gain a deep understanding of how thermal management impacts the efficiency and reliability of xEVs. Uncover the latest advancements in AC & Heat Pump Systems, ensuring effective temperature control for enhanced comfort and energy efficiency. Discover the seamless integration of vehicles and controls, harnessing the power of intelligent systems for optimal xEV operation.  

In this seminar you will learn about:

  • Advances in cooling systems and components 
  • Fast running thermal models 
  • Modeling techniques for air conditioning, heat pump, and vehicle cabins 
  • Thermal distribution and security from 1D to 3D  
  • 3D flow solutions for thermal system simulation engineers 

 

Multi-Physics Battery Modeling

Register for this seminar with our GT Conference 2024 | EU

Discover the fascinating world of battery technologies and gain insights into the intricate interplay of multiple physical phenomena. Delve into the realm of modeling and simulation, equipping yourself with the tools to accurately predict battery performance. Expand your expertise, network with industry leaders, and pave the way for innovative advancements in the field. 

In this seminar we you will learn about:

  • Advanced Model Calibration using Machine Learning 
  • Beyond Lithium-Ion Batteries and Multi-Physics Battery Modeling 
  • Detailed Cell Design and Analysis with 3D Techniques  
  • Thermal Runaway Propagation  
  • Battery Control (BMS) Design with Multi-Physics Models using GT-SUITE, Machine Learning Assistant, GT-Autolion-1D, GT-Autolion-RT and GT-Autolion 3D

Systems Integration and Deployment

Register for this seminar with our GT Conference 2024 | EU

Unlock the power of multi-physics systems integration and optimization! Join our seminar to delve into the realm of cutting-edge technology and discover the art of harmonizing diverse components for enhanced performance. Get motivated, gain insights, and propel your understanding of this exciting field forward. Don’t miss out on the opportunity to drive innovation and revolutionize the future of automotive engineering using GT-SUITE. 

 In this seminar we you will learn about:

  • Real-world driving scenarios 
  • Multi-Physics Integration  
  • Advanced Solutions in Control and External Model Integration  
  • Model Deployment for Digital Twin using GT-SUITE, GT-RealDrive, GT-SUITE-RT, and GT-Play 

Electric Powertrain Design & Analysis

Register for this seminar with our GT Conference 2024 | USA

Join us to learn more about exciting new capabilities in electric powertrain design and analysis. The morning sessions will provide updates into new technology for motor sizing, model building in GT-FEMAG and integration within GT-SUITE. The afternoon sessions will focus on advanced capabilities within GT-SUITE and GT-POWERFORGE for electric powertrain noise, vibration, and harshness and trade-offs with efficiency.  

Expand your professional network by interfacing with industry experts and researchers, fostering meaningful discussions and collaboration opportunities.  

In this seminar you will learn abou:

  • Flexible Geometry Definition with GT-FEMAG 
  • Motor & Inverter component pre-design & sizing 
  • Thermal Workflows for Electric Powertrain 
  • E-Powertrain NVH  
  • Quantifying & Optimizing Trade-offs between Efficiency & NVH using GT-SUITE, GT-FEMAG and GT-POWERFORGE 

Exhaust Aftertreatment and Chemical Systems Modeling

Register for this seminar with our GT Conference 2024 | USA

Discover advanced aftertreatment modeling, fast running chemical kinetics, and innovative approaches to fuel reformers and carbon capture. Engage with experts, expand your network, and be at the forefront of cleaner and sustainable transportation solutions. Don’t miss this opportunity to shape the future of exhaust aftertreatment and chemical systems. Join us and unlock new possibilities in engineering. 

Engage with industry experts and researchers, fostering meaningful discussions and collaboration opportunities. Expand your professional network and stay at the forefront of exhaust aftertreatment and chemical systems modeling. 

 In this seminar you will learn about:

  • Overview of Aftertreatment Modeling with GT-xCHEM
  • Application of Advanced Capabilities in Aftertreatment Modeling
  • Machine Learning for Fast Running Chemical Kinetics
  • Overview of Chemical Systems Modeling with GT-xCHEM
  • Net-Zero Carbon Future: Fuel Reformers, Fuel Synthesis, and Carbon Capture  

Please click here for descriptions of each aftertreatment seminar session.

Future Directions in Engine Performance Simulation

Register for this seminar with our GT Conference 2024 | USA

 Gain insights into key areas, including combustion modeling, real-time performance and emissions analysis, net-zero carbon fuel modeling, and the deployment and evolution of real-time models. 

Discover cutting-edge techniques and methodologies driving predictive modeling and simulation for engine performance. Uncover innovations in combustion modeling, optimizing efficiency and reducing emissions. Explore real-time analysis, enabling immediate performance assessment and emission control. Dive into net-zero carbon fuel modeling, paving the way for sustainable engine technologies. 

Explore the deployment, democratization, and evolution of engine performance models, enabling widespread access and continuous improvement. Connect with industry experts, researchers, and innovators, fostering collaboration and expanding your professional network. 

In this seminar we you will learn about:

  • New Features in Engine and Combustion Modeling  
  • State of the Art in 0D Combustion Modeling  
  • Real-Time Engine Performance and Emissions Modeling 
  • Modeling of Net-Zero Carbon Fuels 
  • Machine Learning and Automated Calibration for Engine Models using GT-SUITE, GT-POWER xRT, ACT, Machine Learning Assistant 

Fluid Systems and Positive Displacement Pumps and Compressors

Register for this seminar with our GT Conference 2024 | USA

Immerse yourself in the world of cutting-edge engineering as we explore the power of simulation. Delve into the intricacies of high-fidelity fluid simulation and positive displacement pumps and compressors, understanding their vital role in various industries, for decarbonization. Discover how simulation techniques enhance the design and optimization of these systems, allowing for improved performance, efficiency, and reliability. Uncover the latest advancements in model building, performance and multibody simulations. Explore how simulation-driven development enables accurate prediction of fluid flow, pressure pulsation, gas and structure temperature, and other critical factors, leading to more robust and cost-effective designs. Connect with industry experts, share insights, and expand your professional network. Collaborate with like-minded professionals and gain invaluable knowledge to stay at the forefront of simulation-enhanced product development. 

In this seminar we you will learn about:

  • Advancements in system driven fluid simulations 
  • Predictive positive displacement compressors and pumps 
  • Machine learning for predictive maintenance and fault detection 
  • Flow and acoustics simulation for component design and characterization  
  • Multi body dynamics of pumps and compressors using GT-SUITE and Machine Learning Assistant  

 

Open Discussion on Fuel Cell, Electrolysis, & Hydrogen

Register for this seminar with our GT Conference 2024 | USA

Don’t miss this empowering opportunity to delve into the depths of physics and be at the forefront of Fuel Cell and Hydrogen Systems Integration and Optimization, shaping the future of hydrogen mobility and a greener tomorrow. Lets’s discuss cutting-edge technologies driving the future of transportation and delve into the deep physics behind fuel cell and hydrogen systems. Gain a comprehensive understanding of the intricate interplay between various components, optimizing their integration for seamless operation and enhanced performance. Uncover the immense potential of hydrogen as a clean and sustainable energy source, revolutionizing the way we move and reducing our carbon footprint. 

In this seminar you will learn about:

  • Best Practices for Fuel Cell and Stack Design 
  • Fuel Cell Degradation Analysis 
  • Machine Learning and Controls Integration in FCEV Models 
  • Water and ICE Management in PEM Fuel Cell Stack Systems 
  • Fundamentals and Advancements in Electrolysis and Hydrogen Infrastucture Modeling using GT-SUITE and Machine Learning Assistant  

Mechanical Dynamics of Powertrain and Vehicle

Register for this seminar with our GT Conference 2024 | USA

Explore the intricate dynamics of mechanical systems that drive powertrains, accessories, and vehicles, gaining a comprehensive understanding of their behavior, including noise, vibration, and harshness (NVH), Friction and Tribology. Explore the interplay between various components, optimizing performance, efficiency, and reliability while ensuring a smooth and comfortable driving experience. Gain insights into powertrain dynamics, studying the interactions between engines, electric machines, and drivetrain systems to minimize NVH levels. Join us for this insightful seminar, where you will deepen your knowledge, engage with experts, and shape the future of mechanical dynamics in powertrain and vehicle systems. Don’t miss this opportunity to make a lasting impact in the field.   

In this seminar you will learn about:

  • Powertrain Mechanics, Friction and Tribology 
  • Gearbox and E-Axle NVH 
  • Multi body dynamics of Pumps and Compressors 
  • Metamodeling for Pre-CAE Concept Design 
  • Vehicle Dynamics in 3D using GT-SUITE and GT-3D MBD 

Thermal Management Throughout the Development Cycle

Register for this seminar with our GT Conference 2024 | USA

Explore the complexities of thermal distribution and security in both 1D and 3D environments, gaining valuable insights into optimizing performance and safety. Gain a deep understanding of how thermal management impacts the efficiency and reliability of xEVs. Uncover the latest advancements in AC & Heat Pump Systems, ensuring effective temperature control for enhanced comfort and energy efficiency. Discover the seamless integration of vehicles and controls, harnessing the power of intelligent systems for optimal xEV operation.  

In this seminar you will learn about:

  • Advances in cooling systems and components 
  • Fast running thermal models 
  • Modeling techniques for air conditioning, heat pump, and vehicle cabins 
  • Thermal distribution and security from 1D to 3D  
  • 3D flow solutions for thermal system simulation engineers 

 

Multi-Physics Battery Modeling

Register for this seminar with our GT Conference 2024 | USA

Discover the fascinating world of battery technologies and gain insights into the intricate interplay of multiple physical phenomena. Delve into the realm of modeling and simulation, equipping yourself with the tools to accurately predict battery performance. Expand your expertise, network with industry leaders, and pave the way for innovative advancements in the field. 

In this seminar we you will learn about:

  • Advanced Model Calibration using Machine Learning 
  • Beyond Lithium-Ion Batteries and Multi-Physics Battery Modeling 
  • Detailed Cell Design and Analysis with 3D Techniques  
  • Thermal Runaway Propagation  
  • Battery Control (BMS) Design with Multi-Physics Models using GT-SUITE, Machine Learning Assistant, GT-Autolion-1D, GT-Autolion-RT and GT-Autolion 3D

Systems Integration and Deployment

Register for this seminar with our GT Conference 2024 | USA

Unlock the power of multi-physics systems integration and optimization! Join our seminar to delve into the realm of cutting-edge technology and discover the art of harmonizing diverse components for enhanced performance. Get motivated, gain insights, and propel your understanding of this exciting field forward. Don’t miss out on the opportunity to drive innovation and revolutionize the future of automotive engineering using GT-SUITE. 

 In this seminar we you will learn about:

  • Real-world driving scenarios 
  • Multi-Physics Integration  
  • Advanced Solutions in Control and External Model Integration  
  • Model Deployment for Digital Twin using GT-SUITE, GT-RealDrive, GT-SUITE-RT, and GT-Play 

Online Aftertreatment Systems & Chemistry Systems

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This 1 day class is intended for users interested in learning how to model exhaust aftertreatment systems and other chemical applications.

To reserve your spot, you must have access to the following:

  • Computer with GT-SUITE v2024 Build 1
  • Access to an active GT-xCHEM license
  • Good internet connection
  • Ideally two monitors/devices (although not required)
    • one to follow the instructor on the web meeting (web browser only)
    • one to use GT-SUITE for interactive model building

The class will include discussion of chemical systems modeling theory, and construction of exhaust aftertreatment system models using GT-xCHEM. The following topics will be discussed in detail:

  • Modeling of chemical converters
  • TWC, SCR, filters and other exhaust aftertreatment devices (depending on participant’s interest)
  • Techniques for calibrating kinetic reaction mechanisms
  • Other chemistry applications
  • 1D, 2D, and 3D modeling options
  • Special topics (time permitting)

Due to the limited room capacity, seats will be allocated preferentially to commercial customers.

Online Cabin Modeling & Simulation (Advanced)

This 1-day class is designed for users with previous experience in GT-SUITE cabin applications or users who attended the Cabin Modeling (Basic) training. It will focus on the simulation of advanced 3D cabin modeling topics.

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

    • Computer with GT-SUITE v2024 (the training will be conducted with v2024, but if you only have v2023 that is acceptable)
    • Access to an active license
    • Good internet connection
    • Ideally two monitors/devices (although not required)
      • one to follow the instructor on the web meeting (web browser only)
      • one to use GT-SUITE for interactive model building

The class will consist primarily of interactive model building exercises. The following are the primary topics to be covered:

  • Model building in GT-TAITherm: Modeling of a thermal structure model using a 3D cabin geometry in GT-TAITherm including topics like multi-layer parts, surface properties, environment modeling including solar radiation and many more
  • CFD Flow Field Mapping:
    • Requirements to CFD data to be used for CFD FFM
    • Modeling building in COOL3D/GEM3D using CFD data and export to GT-ISE
    • Using CFD data as flow solution in GT-ISE
    • Running simulations using CFD data
  • Human Thermal Model:
    • Modeling of human in GT-TAITherm model
    • Including human in the simulation model
    • Running simulations including human thermal model

*If you intend to participate in both trainings (Basic and Advanced Cabin Modeling), please contact the instructor before registration. The regular fee will be $1300 and the university fee $700.

Online Cabin Modeling & Simulation (Basic)

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This 1-day class will introduce to cabin modeling and simulation in GT-SUITE. It will introduce the user to the three different levels of cabin modeling in GT-SUITE: Mono-Volume, Multi-Volume and 3D. For each level the model building process will be covered, and best simulation practices introduced. For the 3D cabin the thermal structure will be modelled in GT-TAITherm.

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

  • Computer with GT-SUITE v2024 (the training will be conducted with v2024, but if you only have v2023 that is acceptable)
  • Access to an active license
  • Good internet connection
  • Ideally two monitors/devices (although not required)
    • one to follow the instructor on the web meeting (web browser only)
    • one to use GT-SUITE for interactive model building

The class will consist primarily of interactive model building exercises. The following are the primary topics to be covered:

  • Building a cabin air loop: Modeling of a cabin air loop including HVAC door, cabin blower, cabin heater and controls. Further the cabin air loop will be connected to an AC system.
  • Mono-Volume cabin: Usage and calibration of a mono-volume cabin and integration into the cabin air loop
  • Multi-Volume cabin: Usage and calibration of a multi-volume cabin and integration it into the cabin air loop
  • 3D cabin:
    • 3D Model building in COOL3D/GEM3D and export to GT-ISE
    • 3D thermal structure model in GT-TAITherm (Note: The model building in GT-TAITherm is covered in the Cabin Modeling (Advanced) training)
    • Usage and calibration of the 3D cabin and integration into the cabin air loop

*If you intend to participate in both Trainings (Basic and Advanced Cabin Modeling), please contact the instructor before registration. The regular fee will be $1300 and the university fee $700.

Due to the limited capacity, seats will be allocated preferentially to commercial customers.

Online Valvetrain (Advanced)

This 1-day class is designed for users with previous experience in GT-SUITE Valvetrain Applications. It will focus on the simulation of special engine valvetrains topics using GT-SUITE. This class contains approximately 7 hours of instruction.

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

    • Computer with GT-SUITE v2024 (the training will be conducted with v2024, but if you only have v2023 that is acceptable)
    • Access to an active license
    • Good internet connection
    • Ideally two monitors/devices (although not required)
      • one to follow the instructor on the web meeting (web browser only)
      • one to use GT-SUITE for interactive model building

The following topics will be covered:

Dynamic correlation

  • Typical measurements
  • Recommended correlation procedures

Springs

  • Comparison of Eigenfrequencies, Fatigue
  • Preview of new feature outputs

Tribology

  • Hertzian Stress and Film models
  • Key roughness inputs
  • Detailed stress analysis
  • Roller crown shaping

Camshaft

  • Estimating Seal data
  • Bending effects

Bearings

  • Simplified GT models
  • Detailed HD models
  • Defining odd feed geometries
  • EHD (Elasto-Hydrodynamics)

HLA (Hydraulic Lash Adjuster)

  • Simple GT model calibration
  • Detailed flow model, breakdown and topology changes (relief valve)

Each application will be attended by small exercises to cover a broad range of applications. If time permits, more specialized topics may be covered as requested by participants.

*If you intend to participate in both Trainings (Basic and Advanced Valvetrain Modeling), please contact the instructor before registration. The regular fee will be $1300 and the university fee $700.

Due to the limited number of seats, priority will be given to commercial clients.

Online Valvetrain (Basic)

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This 1-day class is designed for new users of GT-SUITE Valvetrain Application. It will focus on the simulation of engine valvetrains through the use of VTDESIGN and GT-SUITE. There will also be an introduction to the new ValvetrainDesign interface in GT-SUITE.  This class contains approximately 7 hours of instruction.

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

    • Computer with GT-SUITE v2024 (the training will be conducted with v2024, but if you only have v2023 that is acceptable)
    • Access to an active license
    • Good internet connection
    • Ideally two monitors/devices (although not required)
      • one to follow the instructor on the web meeting (web browser only)
      • one to use GT-SUITE for interactive model building

The following topics will be covered:

Cam Design (VTDESIGN)

  • Develop a profile design starting from an existing a reference profile

Spring Layout (VTDESIGN)

Valvetrain mechanism kinematics, quasi-dynamic analysis (ValvetrainDesign)

  • Generate valve lift from cam shape or vice-versa
  • Calculate idealized separation speed (or Spring Margin)

Dynamic modeling of valvetrains

  • Modeling Contacts for Hertz Pressure and Oil Film Calculations
  • Multi-mass Spring Modeling
  • Adding Compliance to Valvetrain Components

If time permits, more specialized topics may be covered as requested by participants. Some possible topics are: Hydraulic lash adjusters, Cam Phasers, Variable Valve actuation, Transient simulations, Cam Design Optimization or user-supplied suggestions.

*If you intend to participate in both Trainings (Basic and Advanced Valvetrain Modeling), please contact the instructor before registration. The regular fee will be $1300 and the university fee $700.

Due to the limited number of seats, priority will be given to commercial clients.

Online GT-SUITE Introduction Training

This FREE 1-day class will introduce GT-SUITE to new users. The intention of this training is to provide an overview of different GT-domains and to teach the software handling.

This course will be conducted online via web meeting.

Learn the basics of GT-SUITE in this free course.  This class contains approximately 9 hours of instruction, spread over 2 half days.

Day 1 – Monday, 05th August– 13:00 – 17:30

Day 2 – Tuesday, 06th August– 08:30 – 13:00

To reserve your spot, you must have access to the following:

    • Computer with GT-SUITE v2024 (the training will be conducted with v2024, but if you only have v2023 that is acceptable)
    • Access to an active license
    • Good internet connection
    • Ideally two monitors/devices (although not required)
        • one to follow the instructor on the web meeting (web browser only)
        • one to use GT-SUITE for interactive model building

The following topics will be covered in this class:

Introductory Concepts of GT-SUITE:

  • 1-D Mechanical Simulation
  • 1-D Thermal Simulation
  • 1-D Flow Simulation
  • Model Setup- initialization, parameter sweeps
  • Controls
  • Post-processing (GT-POST)
  • Model organization & sharing
  • Object libraries
  • Optimization

Due to the limited number of seats, priority will be given to commercial clients.

Note: Due to some technical issues regarding the registration on our website, you are not able to register via the website.
If you are interested to participate on our August Introduction training, please contact the presenter.

Heat Distribution Modeling – E-Machine — Online

Note that this is a paid event, and the cost in INR with payment instructions are mentioned below.

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

  • Computer with GT-SUITE v2024
  • Access to an active license
  • Good internet connection
  • Ideally two monitors/devices (although not required)
    • one to follow the instructor on the web meeting (web browser only)
    • one to use GT-SUITE for interactive model building

This 1-day class will introduce the use of GT-SUITE software for modeling the distribution of heat within components of the electric powertrain, specifically electric motors.

Electric motor heat distribution models allow the prediction of heat rejection to coolant and/or oil at any operating condition and may be used to study concepts for temperature reduction in the motor as well as defining optimal strategies for the motor control. The class is targeted towards engineers with responsibility for e-components cooling or total vehicle energy management. This class will cover the process of building and calibrating e-components heat distribution models, beginning from CAD data. The process involves significant use of the 3D pre-processing tools of GT-SUITE (GEM3D).

The following are the primary topics to be covered:

  • Conversion of CAD Data for electric motor
  • Building up complete model in GEM3D (FE-components) and export to GT-ISE
  • Advanced treatment of winding anisotropy and spray cooling
  • Steady state thermal analysis
  • Switch to 1D lumped mass approach and model calibration for transient analysis
  • Fee:
    • INR 21,000 for 3 days (4 hrs per day).
    • Registration will be waitlisted until payment is made.
    • Contact [email protected] for the quotation and payment.
  • Note:
    • Class time listed is local time zone
    • Please join the waiting list. Event coordinator will reach out with more details
    • Due to the limited number of seats, priority will be given to commercial clients

Battery Multiphysics Modeling — Online

Note that this is a paid event, and the cost in INR with payment instructions are mentioned below.

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

  • Computer with GT-SUITE v2023 or higher (v2024 recommended)
  • Access to an active license
  • Good internet connection
  • Ideally two monitors/devices (although not required)
    • one to follow the instructor on the web meeting (web browser only)
    • one to use GT-SUITE for interactive model building

This class will introduce the use of GT-AutoLion and GT-SUITE for modeling of battery systems, modules, and cells. This course is targeted towards engineers responsible for battery sizing, cell selection, battery characterization, battery performance modeling, and battery life prediction.

This class will consist of a mix of presentations and interactive model building exercises. The following are the primary topics to be covered:

  • Electrochemical Modeling of Lithium-ion Cells with GT-AutoLion: The fundamentals behind electrochemical modeling will be taught and participantswill gain experience in building electrochemical models in GT-AutoLion. Additionally, participants will learn to build calibrated GT-AutoLion models of Li-ion cells from information on a cell’s specifications sheet.
  • Virtual Test Bench using Controls: Overview and Hands on exercises to demonstrate how can we setup battery tester using some of the templates from GT-Controls Library and also discuss fast charging techniques avoiding lithium plating.
  • Electrical-Equivalent Modeling of Batteries & Characterization: Electrical-equivalent battery models will be introduced, and the participant will learn how to define these models in GT-SUITE and GT-AutoLion as well as how to characterize these models from experimental or GT-AutoLion test data.
  • Integration with Vehicle System Models: The participant will learn how various battery models may be integrated with vehicle system models to accomplish transient vehicle drive cycle analyses, electric vehicle range prediction, or vehicle performance analyses.
  • Fee:
    • INR 14,000 for 1 day.
    • Registration will be waitlisted until payment is made.
    • Contact [email protected] for the quotation and payment.
  • Note:
    • Class time listed is local time zone
    • Please join the waiting list. Event coordinator will reach out with more details
    • Due to the limited number of seats, priority will be given to commercial clients

GT-SUITE INTRODUCTION TRAINING – FREE ONLINE

This FREE 2-week self-learning course (self-paced: ~6hr content) will introduce GT-SUITE to new users. The intention of this training is to provide an overview of different GT-domains and to teach the software handling.

This is a self-learning course where video tutorials link would be shared with all the confirmed attendees on the day of training along with instructions. All attendees are then expected to go over the material and videos which has a total stream time of ~6 hours. In the second week, we will have a session to discuss queries.

To reserve your spot, you must have access to the following:

  • Computer with GT-SUITE 2024 (recommended)
  • Access to an active license
  • Good internet connection
  • Registered account on our website with current Email-ID (if not yet registered, use the following link: https://www.gtisoft.com/user-registration/)

The following topics will be covered in this course:

  • Introductory Concepts of GT-SUITE:
    • 1-D Mechanical Simulation
    • 1-D Thermal Simulation
    • 1-D Flow Simulation
  • Model Setup- initialization, parameter sweeps
  • Controls
  • Post-processing (GT-POST)
  • Model organization & sharing
  • Object libraries
  • Optimization

Note:

  • Class time listed is local time zone
  • Please join the waiting list. Event coordinator will reach out with more details
  • Due to the limited number of seats, priority will be given to commercial clients

GT-SUITE INTRODUCTION TRAINING – FREE ONLINE

This FREE 2-week self-learning course (self-paced: ~6hr content) will introduce GT-SUITE to new users. The intention of this training is to provide an overview of different GT-domains and to teach the software handling.

This is a self-learning course where video tutorials link would be shared with all the confirmed attendees on the day of training along with instructions. All attendees are then expected to go over the material and videos which has a total stream time of ~6 hours. In the second week, we will have a session to discuss queries.

To reserve your spot, you must have access to the following:

  • Computer with GT-SUITE 2024 (recommended)
  • Access to an active license
  • Good internet connection
  • Registered account on our website with current Email-ID (if not yet registered, use the following link: https://www.gtisoft.com/user-registration/)

The following topics will be covered in this course:

  • Introductory Concepts of GT-SUITE:
    • 1-D Mechanical Simulation
    • 1-D Thermal Simulation
    • 1-D Flow Simulation
  • Model Setup- initialization, parameter sweeps
  • Controls
  • Post-processing (GT-POST)
  • Model organization & sharing
  • Object libraries
  • Optimization

Note:

  • Class time listed is local time zone
  • Please join the waiting list. Event coordinator will reach out with more details
  • Due to the limited number of seats, priority will be given to commercial clients

GTTC ’24 [GT Technical Conference] | EUROPE

Save the Date!

Gamma Technologies is excited to host the 2024 EUROPEAN GTTC (GT Technical Conference) in person on November 5-6, 2024 at The Steigenberger Airport Hotel in Frankfurt, Germany. This free two-day event will feature presentations from leading organizations on how they achieve their ground-breaking work using GT-SUITE.

Please see here for preliminary agenda.

In the past we have presentations from industry leaders such as Alpine Cars, Volvo Trucks, BMW, and many more!

SPECIAL: Course on Design and operating characteristics of electrical machines | MONDAY, NOV4th

This course is targeted towards teaching the design of permanent magnet synchronous machines (PMSM) with various construction solutions and for an array of applications within the power range spanning several kW for industrial drives and up to several MW for PM generators. The course will be taught by expert from industry and academia. Please see here for separate registration.

NIGHT BEFORE EVENT| Welcome Drinks! | MONDAY, NOV4th
Kick off the conference with a relaxing evening of drinks with friends and GT staff at our get together.

DAY 1 | Conference Presentation Day | TUESDAY, NOV 5th
The conference begins on Tuesday, November 5th with a keynote followed by presentations from expert users of all GT tools (GT-SUITE, GT-FEMAG, GT-AutoLion, GT-PowerForge, GT-Play and more). These presentations address industry challenges in many applications such as electrification, thermal management, NVH, engine modeling and more!

DAY 2 | GT-FEMAG User Conference & Technical Seminar Day | WEDNESDAY, NOV 6th
On day 2 we will welcome GT-FEMAG users and, in parallel, have seminar sessions. Learn more about these seminars here.

View the full agenda: HERE

GTTC ’24 [GT Technical Conference] | USA

Save the Date!

Gamma Technologies is excited to host the 2024 North American GTTC (GT Technical Conference) in person on October 15-16, 2024 at The Inn at Saint John’s in Plymouth, MI. This free two-day event will feature presentations from leading organizations on how they achieve their ground-breaking work using GT-SUITE.

In the past we have had presentations from industry leaders such as Copeland, Volvo Group, General Motors, Navistar Inc., UL Research Institutes, and many more!

View the preliminary agenda: HERE. 

DAY 1 | Conference Program | TUESDAY, OCT 15th
The conference begins on Tuesday, October 15th with a keynote followed by presentations from GT-SUITE  expert users. These presentations address industry challenges in many applications such as electrification, thermal management, NVH, engine modeling and more!

DAY 2 | Conference Technical Seminars | WEDNESDAY, OCT 16th
As in past years, we’re offering free, full-day seminars that start on the second day of the conference. Learn more about these seminars here.

Heat Distribution Modeling –Battery- Online

Note that this is a paid event, and the cost in INR with payment instructions are mentioned below.

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

  • Computer with GT-SUITE v2024 (recommended)
  • Access to an active license
  • Good internet connection
  • Ideally two monitors/devices (although not required)
    • one to follow the instructor on the web meeting (web browser only)
    • one to use GT-SUITE for interactive model building

This class will introduce the use of GT-SUITE software for modeling the distribution of heat within batteries. Battery heat distribution models enable users to design and optimize the battery pack and its related cooling components such as cooling plates or fins. Furthermore those models can be used to integrate the thermal and electric domains to study system level effects and help design other components like the BMS. The class is targeted towards engineers with responsibility for e-components cooling or total vehicle energy management. This class will cover the process of building and calibrating battery heat distribution models, beginning from CAD data. The process involves significant use of the 3D pre-processing tools of GT-SUITE (GEM3D).

The following are the primary topics to be covered:

  • Conversion of CAD Data for battery pack
  • Building up complete model in GEM3D (lumped thermal model and FE-components) and export to GT-ISE
  • Calibration of flow distribution & heat transfer
  • Integration of flow/thermal model into complete thermal management models
  • Link of thermal/flow model to electric circuits
  • Fee:
    • INR 21,000 for 3 days (4 hrs per day).
    • Registration will be waitlisted until payment is made. o
    • Contact [email protected] for the quotation and payment.
  • Note:
    • Class time listed is local time zone
    • Please join the waiting list. Event coordinator will reach out with more details
    • Due to the limited number of seats, priority will be given to commercial clients

GT-SUITE INTRODUCTION TRAINING – FREE ONLINE

This FREE 2-week self-learning course (self-paced: ~6hr content) will introduce GT-SUITE to new users. The intention of this training is to provide an overview of different GT-domains and to teach the software handling.

This is a self-learning course where video tutorials link would be shared with all the confirmed attendees on the day of training along with instructions. All attendees are then expected to go over the material and videos which has a total stream time of ~6 hours. In the second week, we will have a session to discuss queries.

To reserve your spot, you must have access to the following:

  • Computer with GT-SUITE 2024 (recommended)
  • Access to an active license
  • Good internet connection
  • Registered account on our website with current Email-ID (if not yet registered, use the following link: https://www.gtisoft.com/user-registration/)

The following topics will be covered in this course:

  • Introductory Concepts of GT-SUITE:
    • 1-D Mechanical Simulation
    • 1-D Thermal Simulation
    • 1-D Flow Simulation
  • Model Setup- initialization, parameter sweeps
  • Controls
  • Post-processing (GT-POST)
  • Model organization & sharing
  • Object libraries
  • Optimization

Note:

  • Class time listed is local time zone
  • Please join the waiting list. Event coordinator will reach out with more details
  • Due to the limited number of seats, priority will be given to commercial clients

Online Predictive Friction for Cranktrain

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

  • Computer with GT-SUITE v2024 (the training will be conducted with v2024, but if you only have v2023 that is acceptable)
  • Access to an active license
  • Good internet connection
  • Ideally two monitors/devices (although not required)
    • one to follow the instructor on the web meeting (web browser only)
    • one to use GT-SUITE for interactive model building

The following topics will be covered during this 2-day class:

Class will focus on the sub-systems that play a major part in terms of overall mechanical power losses of an engine. The participants will learn how to set these systems up, how to investigate different designs/parameters and how to put everything in context. The topics that will be covered in detail are: 

Basic Concepts of Friction Modeling in GT-SUITE: 

  • Components and Reference Objects like Surfaces/Coatings, Oil Properties etc. 

Crankshaft Analysis 

  • Journal Bearing Modeling in detailed level (from map-based solution to EHD Bearings)
  • Seals and other Losses (TVD) 

Piston-Group Dynamics 

  • Piston Rings Design 
  • Compliant Piston Skirt to Liner Model incl. Extraction of Stiffness Matrices 

Evaluation of Results 

  • Calibration of results vs. measured data 
  • Results in context of vehicle driving cycle 
  • Introduction into concepts on how to optimize different quantities such as fuel consumption 

If time permits, extra and more specialized topics may be covered. The topics will be selected by the participants. Some possible topics are: Blowby and Oil Evaporation, user-supplied. 

Due to the limited room capacity, seats will be allocated preferentially to commercial customers.

 

Online Cranktrain Modeling

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

  • Computer with GT-SUITE v2024 (the training will be conducted with v2024, but if you only have v2023 that is acceptable)
  • Access to an active license
  • Good internet connection
  • Ideally two monitors/devices (although not required)
    • one to follow the instructor on the web meeting (web browser only)
    • one to use GT-SUITE for interactive model building

This 2-day class is designed for those interested in Cranktrain modeling and analysis in GT-SUITE. It will focus on the simulation of engine cranktrain dynamics through the use of GT-SUITE. The following topics will be covered: 

Rigid Crankshaft Analysis 

  • Crankshaft Balancing 
  • Cylinder Pressure Boundary Conditions Applied 

Crankshaft Torsional Analysis 

  • Time Domain Solution with Steady State Convergence 
  • Frequency Domain Solutions (Free and Forced) 

Crankshaft Quasi-Static and Dynamic Bending Solution 

  • Fillet Stress Calculations Based on Dynamic Loading 
  • Coupled Journal Bearing Solution 

If time permits, extra and more specialized topics may be covered. The topics will be selected by the participants. Some possible topics are: Block Vibration, Accessory Belt Drive Modeling,  Integrated Simulations (e.g. cranktrain + valvetrain, cranktrain + drivetrain), Transient simulations, user-supplied. 

Due to the limited room capacity, seats will be allocated preferentially to commercial customers.

 

Online Aftertreatment Systems

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

  • Computer with GT-SUITE v2023 (the training will be conducted with v2023, but if you only have v2022 that is acceptable)
  • Access to an active license
  • Good internet connection
  • Ideally two monitors/devices (although not required)
    • one to follow the instructor on the web meeting (web browser only)
    • one to use GT-SUITE for interactive model building

This class is intended for GT-SUITE users interested in learning how to model exhaust aftertreatment systems. The class will include discussion of exhaust aftertreatment modeling theory, and construction of exhaust aftertreatment system models using GT-SUITE. The following topics will be discussed in detail: 

  • TWC, DPF, SCR, and other exhaust aftertreatment devices 
  • Modeling of chemical kinetic reactions for catalysts 
  • Soot filtration and regeneration models for DPFs 
  • Techniques for calibrating DPF pressure drop and soot regeneration 
  • Techniques for calibrating kinetic reaction mechanisms 
  • 1D, 2D, and 3D heat transfer modeling options
  • Special topics (time permitting)

Due to the limited room capacity, seats will be allocated preferentially to commercial customers.

 

Online GT-SUITE Introduction Training

This FREE course will introduce GT-SUITE to new users. The course will be two half-days with a break from approximately 1-2 CST.

The intention of this training is to teach handling of the software to enable users to build models and post-process results. This is demonstrated through hands-on exercises with relatively simple models in the flow, mechanical, and thermal domains.

The focus is not on those specific models or domains, but rather learning the software usage. Therefore, this course is recommended for anyone interested in using GT-SUITE, regardless of their specific application. Additional classes are available on the following day(s) which will build upon the material in this course and cover more details on specific applications.

This course will be conducted online via web meeting. A link will be e-mailed to you in the week prior to the class.

To reserve your spot, you must have access to the following:

  • Computer with GT-SUITE v2024 (the training will be conducted with v2024, but if you only have v2023 that is acceptable)
  • Access to an active license
  • Good internet connection
  • Ideally two monitors/devices (although not required)
    • one to follow the instructor on the web meeting (web browser only)
    • one to use GT-SUITE for interactive model building

Introductory Concepts of GT-SUITE:

  • Model Building (GT-ISE)
  • Model Setup: initialization, parameter sweeps
  • Controls
  • Post-processing (GT-POST)
  • Model organization & sharing
  • Object libraries
  • Optimization

Due to the limited number of seats, priority will be given to commercial customers.

 

Indian Roadshow | Delhi

Welcome to the Gamma Technologies’ Indian Roadshow in Delhi.

Join us for a dynamic in-person event in the historic city of Delhi, where we’ll engage in meaningful discussions about the critical role of system simulation in our collective pursuit of achieving net-zero emissions. This roadshow provides a unique opportunity to meet industry experts and peers, connect with GT’s expert teams, and gain valuable insights into how leading companies are harnessing GT’s state-of-the-art system solutions to overcome their product development challenges.

Throughout the event, we’ll delve deep into various focus topics:

  • Future of Thermal Management
  • Electrification
  • Power of system simulation in Vehicle Modelling
  • Hydrogen Developments (H2 ICE, Fuel Cell)
  • Machine learning for System Simulation
  • Future of ICE’s and role of Simulation
  • Real time Modelling

Additionally, take the opportunity to participate in the following Expert Round Table discussions, where you can exchange ideas with GT experts about your simulation needs and future requirements.

  • HVAC & Thermal Management
  • Cell/Battery Ageing & Performance
  • Motor Modelling
  • Vehicle Modelling
  • Mechanical Systems
  • XiL Studies (SiL, MiL, HiL) and Automation
  • Developments in ICE
  • Hydrogen & Fuel Cell

REGISTER TODAY!

  • Please note that registration is subject to GT approval; priority will be given to our local commercial customers.

GT India Tech Summit 2024 | Chennai

Welcome to the Gamma Technologies’ Indian Tech Summit in Chennai.

Join us for a dynamic in-person event in the historic city of Chennai, where we’ll engage in meaningful discussions about the critical role of system simulation in our collective pursuit of achieving net-zero emissions. This roadshow provides a unique opportunity to meet industry experts and peers, connect with GT’s expert teams, and gain valuable insights into how leading companies are harnessing GT’s state-of-the-art system solutions to overcome their product development challenges.

Throughout the event, we’ll delve deep into various focus topics:

  • Future of Thermal Management
  • Electrification
  • Power of system simulation in Vehicle Modelling
  • Hydrogen Developments (H2 ICE, Fuel Cell)
  • Machine learning for System Simulation
  • Future of ICE’s and role of Simulation
  • Real time Modelling

Additionally, take the opportunity to exchange ideas with GT experts about your simulation needs and future requirements.

  • HVAC & Thermal Management
  • Cell/Battery Ageing & Performance
  • Motor Modelling
  • Vehicle Modelling
  • Mechanical Systems
  • XiL Studies (SiL, MiL, HiL) and Automation
  • Developments in ICE
  • Hydrogen & Fuel Cell

REGISTER TODAY!

  • Please note that registration is subject to GT approval; priority will be given to our local commercial customers.

Online Heat Distribution Modeling – Electric Powertrain (E-Machine)

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This 1,5-day class will introduce the use of GT-SUITE software for modeling the distribution of heat within components of the electric powertrain, specifically electric motors.

Day 1 – Wednesday, 03rd July, – 09:00 – 17:00

Day 2 – Thursday, 04th July – 09:00 – 13:00

Electric motor heat distribution models allow the prediction of heat rejection to coolant and/or oil at any operating condition and may be used to study concepts for temperature reduction in the motor as well as defining optimal strategies for the motor control. The class is targeted towards engineers with responsibility for e-components cooling or total vehicle energy management. This class will cover the process of building and calibrating e-components heat distribution models, beginning from CAD data. The process involves significant use of the 3D pre-processing tools of GT-SUITE (GEM3D and GT-SpaceClaim).

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

  • Computer with GT-SUITE v2024
  • Access to an active license
  • Good internet connection
  • Ideally two monitors/devices (although not required)
    • one to follow the instructor on the web meeting (web browser only)
    • one to use GT-SUITE for interactive model building

The following are the primary topics to be covered:

  • Conversion of CAD Data for electric motor
  • Building up complete model in GEM3D (FE-components) and export to GT-ISE
  • Advanced treatment of winding anisotropy and spray cooling
  • Steady state thermal analysis
  • Switch to 1D lumped mass approach and model calibration for transient analysis

Due to the limited number of seats, priority will be given to commercial clients.

Online Underhood Airflow Modeling

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This 1-day class will introduce the use of the COOL3D pre-processing tool for modeling the underhood airflow. The focus of this class is on the airflow in the underhood compartment and heat exchanger performance calculations. The class is targeted towards engineers with responsibility for vehicle thermal management, or for those who are responsible for specifying underhood components (heat exchangers, fans, etc.).

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

  • Computer with GT-SUITE v2024 (the training will be conducted with v2024, but if you only have v2023 that is acceptable)
  • Access to an active license
  • Good internet connection
  • Ideally two monitors/devices (although not required)
    • one to follow the instructor on the web meeting (web browser only)
    • one to use GT-SUITE for interactive model building

The class will consist primarily of interactive model building exercises. The following are the primary topics to be covered:

  • Building the underhood model in COOL3D: The participant will learn how to build and export a predictive quasi-3D model of the underhood compartment within the COOL3D tool, including grilles, bumpers, radiator, charge air cooler, A/C condenser, fan, fan shroud, and engine block.
  • Running the GT-SUITE underhood model: The participant will learn how to define boundary conditions to run a steady state underhood analysis within GT-SUITE. The use of COOL3D to evaluate different design alternatives will be discussed.
  • Integration with Cooling/Engine/Vehicle models: The participant will understand the capabilities of GT-SUITE to integrate underhood models created within COOL3D into larger system level simulations that may include cooling, engine, and vehicle systems.

Due to the limited number of seats, priority will be given to commercial clients.

Online HVAC System Modeling & Simulation

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This 1-day class will introduce the use of GT-SUITE software for modeling of air conditioning or heat pump systems, including the refrigerant circuit, HVAC ducting, and cabin. The class is targeted towards engineers with responsibility for design and analysis of A/C systems, or for those who are responsible for overall vehicle energy management including an A/C system.

The class will consist primarily of interactive model building exercises.

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

    • Computer with GT-SUITE v2024
    • Access to an active license
    • Good internet connection
    • Ideally two monitors/devices (although not required)
      • one to follow the instructor on the web meeting (web browser only)
      • one to use GT-SUITE for interactive model building

The following are the primary topics to be covered:

  • Modeling the refrigerant flow network:Basic flow system modeling and discretization concepts, usage of GEM3D for flow systems modeling.
  • Modeling A/C system components:Building and calibration of the basic components of A/C systems, such as compressor, receiver/dryer, thermal expansion valve, and heat exchangers. Usage of COOL3D pre-processing tool to build and automatically discretize more complex scenarios (non-uniform inlet air flow, for example).
  • Assembling the complete A/C system model for system level calculations:Assembling the refrigerant flow network and A/C components into a complete model of the A/C system. Steady state and transient system analysis. GT-POST post-processing tool for analysis of results.
  • Modeling air circuits:Modeling of the HVAC ducting and the blower.
  • Modeling the vehicle cabin:Different levels of modeling detail available for modeling the cabin within GT-SUITE.
  • Integration with Cooling/Engine/Vehicle models:Introduction of integrating the A/C system models into vehicle system level simulations including cooling, engine, and driveline systems. Cabin pulldown transient simulations, transient drive cycle analysis for fuel economy/energy management (i.e. US EPA SC03 cycle).

Due to the limited number of seats, priority will be given to commercial clients.

Online Fuel Cell

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This 1-day class will introduce the use of GT-SUITE for modeling of fuel cell stacks and systems. This course is targeted towards engineers responsible for fuel cell sizing, performance modeling, and balance of plant systems design.

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

  • Computer with GT-SUITE v2024 (the training will be conducted with v2024 only)
  • Access to an active license
  • Good internet connection
  • Ideally two monitors/devices (although not required)
    • one to follow the instructor on the web meeting (web browser only)
    • one to use GT-SUITE for interactive model building

This class will consist of a mix of presentations and interactive model building exercises. The following are the primary topics to be covered:

  • Electrochemical Modeling of Fuel Cells Stacks with GT-SUITE: The fundamentals behind electrochemical modeling will be taught and participants will gain experience in building a stack model and calibrating it against measurement data.
  • Modeling a Balance of Plant System: The participant will learn how to build a model of the full fuel cell system including:
    • Hydrogen Tank and Circulation
    • Air Compression and Humification
    • Cooling System
    • Stoichiometry control
  • Integration with Vehicle System Models: The participant will learn how a fuel cell system may be integrated with vehicle level models to accomplish transient vehicle drive cycle analyses, range prediction, or vehicle performance analyses.

Due to the limited number of seats, priority will be given to commercial clients.

Online HVAC System Modeling & Simulation

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This class will introduce the use of GT-SUITE software for modeling of air conditioning or heat pump systems, including the refrigerant circuit, HVAC ducting, and cabin. The class is targeted towards engineers with responsibility for design and analysis of A/C systems, or for those who are responsible for overall vehicle energy management including an A/C system. 

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

  • Computer with GT-SUITE v2024 (the training will be conducted with v2024, but if you only have v2023 that is acceptable)
  • Access to an active license
  • Good internet connection
  • Ideally two monitors/devices (although not required)
    • one to follow the instructor on the web meeting (web browser only)
    • one to use GT-SUITE for interactive model building

The class will consist primarily of interactive model building exercises. The following are the primary topics to be covered: 

  • Modeling the refrigerant flow network: Basic flow system modeling and discretization concepts, usage of GEM3D for flow systems modeling. 
  • Modeling A/C system components: Building and calibration of the basic components of A/C systems, such as compressor, receiver/dryer, thermal expansion valve, and heat exchangers. Usage of COOL3D pre-processing tool to build and automatically discretize more complex scenarios (non-uniform inlet air flow, for example). 
  • Assembling the complete A/C system model for system level calculations: Assembling the refrigerant flow network and A/C components into a complete model of the A/C system. Steady state and transient system analysis. GT-POST post-processing tool for analysis of results. 
  • Modeling air circuits: Modeling of the HVAC ducting and the blower. 
  • Modeling the vehicle cabin: Different levels of modeling detail available for modeling the cabin within GT-SUITE. 
  • Integration with Cooling/Engine/Vehicle models: Introduction of integrating the A/C system models into vehicle system level simulations including cooling, engine, and driveline systems. Cabin pulldown transient simulations, transient drive cycle analysis for fuel economy/energy management (i.e. US EPA SC03 cycle).

Due to the limited room capacity, seats will be allocated preferentially to commercial customers.

 

Online GT-SUITE Introduction Training

This FREE 1-day class will introduce GT-SUITE to new users. The intention of this training is to provide an overview of different GT-domains and to teach the software handling.

This course will be conducted online via web meeting.

Learn the basics of GT-SUITE in this free course.  This class contains approximately 9 hours of instruction, spread over 2 half days.

Day 1 – Monday, 1st July– 13:00 – 17:30

Day 2 – Tuesday, 02nd July– 08:30 – 13:00

To reserve your spot, you must have access to the following:

    • Computer with GT-SUITE v2023 (the training will be conducted with v2023, but if you only have v2022 that is acceptable)
    • Access to an active license
    • Good internet connection
    • Ideally two monitors/devices (although not required)
        • one to follow the instructor on the web meeting (web browser only)
        • one to use GT-SUITE for interactive model building

The following topics will be covered in this class:

Introductory Concepts of GT-SUITE:

  • 1-D Mechanical Simulation
  • 1-D Thermal Simulation
  • 1-D Flow Simulation
  • Model Setup- initialization, parameter sweeps
  • Controls
  • Post-processing (GT-POST)
  • Model organization & sharing
  • Object libraries
  • Optimization

Due to the limited number of seats, priority will be given to commercial clients.

India Tech Summit | Bengaluru

Welcome to the GT India Tech Summit in Bengaluru.

Join us for a dynamic in-person event in the tech city of Bengaluru, where we’ll engage in meaningful discussions about the critical role of system simulation in our collective pursuit of achieving net-zero emissions. This roadshow provides a unique opportunity to meet industry experts and peers, connect with GT’s expert teams, and gain valuable insights into how leading companies are harnessing GT’s state-of-the-art system solutions to overcome their product development challenges.

Throughout the event, we’ll delve deep into various focus topics:

  • Future of Thermal Management
  • Electrification
  • Power of system simulation in Vehicle Modelling
  • Hydrogen Developments (H2 ICE, Fuel Cell)
  • Machine learning for System Simulation
  • Future of ICE’s and role of Simulation
  • Real time Modelling

Additionally, take the opportunity to participate in the following Expert Round Table discussions, where you can exchange ideas with GT experts about your simulation needs and future requirements.

  • HVAC & Thermal Management
  • Cell/Battery Ageing & Performance
  • Motor Modelling
  • Vehicle Modelling
  • Mechanical Systems
  • XiL Studies (SiL,MiL,HiL) and Automation
  • Developments in ICE
  • Hydrogen & Fuel Cell

REGISTER TODAY!

  • Please note that registration is subject to GT approval; priority will be given to our local commercial customers.

Online Cabin Modeling & Simulation (Advanced)

Note that this is a paid event, and the cost in INR with payment instructions are mentioned below.

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

  • Computer with GT-SUITE v2024
  • Access to an active license
  • Good internet connection
  • Ideally two monitors/devices (although not required)
    • one to follow the instructor on the web meeting (web browser only)
    • one to use GT-SUITE for interactive model building

The class will consist primarily of interactive model building exercises. The following are the primary topics to be covered:

  • Model building in GT-TAITherm: Modeling of a thermal structure model using a 3D cabin geometry in GT-TAITherm including topics like multi-layer parts, surface properties, environment modeling including solar radiation and many more
  • CFD Flow Field Mapping:
    • Requirements to CFD data to be used for CFD FFM
    • Modeling building in COOL3D/GEM3D using CFD data and export to GT-ISE
    • Using CFD data as flow solution in GT-ISE
    • Running simulations using CFD data
  • Human Thermal Model:
    • Modeling of human in GT-TAITherm model
    • Including human in the simulation model
    • Running simulations including human thermal model
  • Fee:
    • INR 14,000 for 2 days (4 hours per day)
    • Registration will be waitlisted until payment is made.
    • Contact [email protected] for the quotation and payment.
  • Note:
    • Class time listed is local time zone
    • Please join the waiting list. Event coordinator will reach out with more details
    • Due to the limited number of seats, priority will be given to commercial clients

Cabin Modeling & Simulation (Basic)

Note that this is a paid event, and the cost in INR with payment instructions are mentioned below.

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This 1-day class will introduce to cabin modeling and simulation in GT-SUITE. It will introduce the user to the three different levels of cabin modeling in GT-SUITE: Mono-Volume, Multi-Volume and 3D. For each level the model building process will be covered, and best simulation practices introduced. For the 3D cabin the thermal structure will be modeled in GT-TAITherm.

This course will be conducted online via web meeting.

To reserve your spot, you must have access to the following:

  • Computer with GT-SUITE v2024
  • Access to an active license
  • Good internet connection
  • Ideally two monitors/devices (although not required)
    • one to follow the instructor on the web meeting (web browser only)
    • one to use GT-SUITE for interactive model building

The class will consist primarily of interactive model building exercises. The following are the primary topics to be covered:

  • Building a cabin air loop: Modeling of a cabin air loop including HVAC door, cabin blower, cabin heater and controls. Further the cabin air loop will be connected to an AC system.
  • Mono-Volume cabin: Usage and calibration of a mono-volume cabin and integration into the cabin air loop
  • Multi-Volume cabin: Usage and calibration of a multi-volume cabin and integration it into the cabin air loop
  • 3D cabin:
    • 3D Model building in COOL3D/GEM3D and export to GT-ISE
    • 3D thermal structure model in GT-TAITherm (Note: The model building in GT-TAITherm is covered in the Cabin Modeling (Advanced) training)
    • Usage and calibration of the 3D cabin and integration into the cabin air loop
  • Fee:
    • INR 14,000 for 2 days (4 hours per day)
    • Registration will be waitlisted until payment is made.
    • Contact [email protected] for the quotation and payment.
  • Note:
    • Class time listed is local time zone
    • Please join the waiting list. Event coordinator will reach out with more details
    • Due to the limited number of seats, priority will be given to commercial clients

GT-SUITE INTRODUCTION TRAINING – FREE ONLINE

This FREE 2-week self-learning course (self-paced: ~6hr content) will introduce GT-SUITE to new users. The intention of this training is to provide an overview of different GT-domains and to teach the software handling.

This is a self-learning course where video tutorials link would be shared with all the confirmed attendees on the day of training along with instructions. All attendees are then expected to go over the material and videos which has a total stream time of ~6 hours. In the second week, we will have a session to discuss queries.

To reserve your spot, you must have access to the following:

  • Computer with GT-SUITE 2024 (recommended)
  • Access to an active license
  • Good internet connection
  • Registered account on our website with current Email-ID (if not yet registered, use the following link: https://www.gtisoft.com/user-registration/)

The following topics will be covered in this course:

  • Introductory Concepts of GT-SUITE:
    • 1-D Mechanical Simulation
    • 1-D Thermal Simulation
    • 1-D Flow Simulation
  • Model Setup- initialization, parameter sweeps
  • Controls
  • Post-processing (GT-POST)
  • Model organization & sharing
  • Object libraries
  • Optimization

Note:

  • Class time listed is local time zone
  • Please join the waiting list. Event coordinator will reach out with more details
  • Due to the limited number of seats, priority will be given to commercial clients

GT Technical Webinar Series: Multi-physics Integration of Mechanical Systems October, 23

A common trend observable across multiple industries is increasing system complexity coupled with tighter performance and efficiency demands. Meeting these requirements and exceeding customer expectations requires a reevaluation of long-standing processes and in certain cases, a shift from stand-alone design and simulation. To achieve the optimal product and avoid costly iteration loops, complex interactions between various physics domains need to be understood and accounted for as early as possible in the design process.
As the leading Multi-Physics System Simulation tool, GT-SUITE offers streamlined capabilities to easily couple multiple domains in one model. This webinar will showcase some of the available options of integrating mechanical system models with other domains within GT-SUITE. In addition to highlighting improvements and new features added in GT-SUITE v2024, some examples will be shown on how integration is leveraged by GT customers. Topics covered include integration of mechanical models with GT-POWER, Scroll Compressor Fluid-Structure-Interaction and Electrochemical-Mechanical Battery Swelling.

Topics include: 

• Investigate Battery swelling via coupling GT’s electrochemical solution GT-AutoLion with mechanical flexible bodies.
• Experience how fluid pressures can be applied on mechanical structures, as with the new FSI (Fluid-Structure Interaction) workflow for scroll compressors.
• An integrated approach for electric motor NVH analysis is presented, considering e-motor layout with GT-FEMAG, modeling power electronics and applying forces on the e-motor stator, followed by acoustic analysis.
• Impose nodal temperatures on FE bodies to account for thermal stresses/strains

Presenters:

Marcel Schmädicke | Applications Engineering Manager | Mechanical Systems at Gamma Technologies GmbH

Ashwin Henry | Application Engineer | Mechanical Systems at Gamma Technologies

 

Please note that this event will be held twice. Check the timings below: 

Session I: 2:30 PM IST (India) | 11 AM CET (Germany)

Session II: 12PM CDT (Chicago) | 1PM EDT (New York)

 

>>>>>Register for the webinar<<<<<

GT Technical Webinar Series: Testing Heat Pump System Retrofitting in GT-SUITE October, 9th

Driven by regulatory requirements, alternatives to classic refrigerants must be found. Propane is a promising alternative for running a heat pump. This webinar addresses the need for alternatives to classic refrigerants due to regulatory requirements, highlighting propane as a promising option. It features a presentation on designing a propane-based heat pump using GT-SUITE, based on an existing R410A system, and aims to preserve most components. Additionally, the webinar explores optimizing vapor injection compressors to enhance system efficiency and reduce costs by determining the optimal geometric position for steam injection, considering dynamic system and compressor interactions.

Topics include: 

• Regulatory requirements are driving the search for alternatives to traditional refrigerants
• Propane is a promising alternative for heat pumps, supported by European scientific community
• This webinar presents a heat pump using propane designed in GT-SUITE, aiming to retain existing components
• A holistic system optimization methodology is employed to determine the optimal geometric position of steam injection, considering dynamic system and compressor interactions

 

Presenter:

Arne Heinrich | Senior Application Engineer | Thermal Fluid Systems at Gamma Technologies

 

Please note that this event will be held twice. Check the timings below: 

Session I: 2:30 PM IST (India) | 11 AM CET (Germany)

Session II: 12PM CDT (Chicago) | 1PM EDT (New York)

 

>>>>>Register for the webinar<<<<<

GT Technical Webinar Series: Function development with thermal management plant models JUNE 26, 2024

The shift to electric vehicles (xEVs) presents complex thermal-management challenges requiring advanced systems for temperature control and range optimization. The industry is increasingly using virtual testing and Hardware in the Loop (HiL) simulations for early validation, reducing costs and development times.

This webinar explores methods to streamline thermal management models for Battery Electric Vehicles (BEVs) using high-fidelity models with detailed thermal representations. By transitioning from 3D to 1D modeling and simplifying systems, we achieve faster-than-real-time performance suitable for HiL testing.

Topics include: 

• The industry is turning to virtual testing and Hardware in the Loop (HiL) simulations to address thermal-management challenges linked to electric vehicles
• A holistic approach to thermal management simulation is needed for xEVs to optimize efficiency
• The study focuses on streamlining complex thermal management models of Battery Electric Vehicles (BEVs) through virtualization of vehicle design for early validation
• Transitioning from 3D to 1D thermal modelling and simplifying flow systems reduces runtime
• Allowing to implement a unique parallel threading approach enables real-time execution on HiL systems
• The development of a fast-running model simplifies complex models, accelerates runtime, and enables HiL testing for xEV development

Presenter:

Sagar Kulkarni | Application Engineer | Thermal Fluid Systems at Gamma Technologies

Please note that this event will be held twice. Check the timings below: 

Session I: 2:30 PM IST (India) | 11 AM CET (Germany)

Session II: 12PM CDT (Chicago) | 1PM EDT (New York)

 

>>>>>Register for the webinar<<<<<

GT-DRIVE EV & Conventional Vehicle Modeling Training — Online

Note that this is a paid event, and the cost in INR with payment instructions are mentioned below.

This class is intended for users with previous experience or users who participate in this free-of-charge Introduction Training.

This 1-day course is intended for those interested in developing Conventional Vehicle or pure Electric Vehicle models for fuel economy or range studies.

This course will be conducted online, and the participants are requested to arrange for

–        a computer with GT-SUITE version 2024 (recommended)

–        access to an active license and

–        also, a good internet connection.

–        Ideally two monitors/devices (although not a must-have)

  • one to follow the instructor on the web meeting (web browser only)
  • one to use GT-SUITE for interactive model building

Day 1 – Wednesday, 24th July – 10:00 – 14:00

Day 2 – Thursday, 25th July – 10:00 – 14:00

 

Once your registration is confirmed you will receive the link to connect with the online live course.

The following topics will be covered in this course:

Day 1

  • Introduction to BEV Modeling (4W)
    • Acc Test
    • Drive Cycle Analysis
    • Range
    • Tip In
    • Gradability
    • Powertrain Component Sizing
  • GT – RealDrive Demo

Day 2

  • Introduction to Conventional Vehicle Modeling (4W)
    • Acc Test
    • Drive Cycle Analysis
    • Tip In
    • Gradability
  • IRDE – Compliant Cycle Generation Demo
  • Fee:
    • INR 14,000 for 2 day. (4hrs per day)
    • Registration will be waitlisted until payment is made.
    • Contact [email protected] for the quotation and payment.
  • Note:
    • Class time listed is local time zone
    • Please join the waiting list. Event coordinator will reach out with more details
    • Due to the limited number of seats, priority will be given to commercial clients

GT-SUITE INTRODUCTION TRAINING – FREE ONLINE

This FREE 2-week self-learning course (self-paced: ~6hr content) will introduce GT-SUITE to new users. The intention of this training is to provide an overview of different GT-domains and to teach the software handling.

This is a self-learning course where video tutorials link would be shared with all the confirmed attendees on the day of training along with instructions. All attendees are then expected to go over the material and videos which has a total stream time of ~6 hours. In the second week, we will have a session to discuss queries.

To reserve your spot, you must have access to the following:

  • Computer with GT-SUITE 2024 (recommended)
  • Access to an active license
  • Good internet connection
  • Registered account on our website with current Email-ID (if not yet registered, use the following link: https://www.gtisoft.com/user-registration/)

The following topics will be covered in this course:

  • Introductory Concepts of GT-SUITE:
    • 1-D Mechanical Simulation
    • 1-D Thermal Simulation
    • 1-D Flow Simulation
  • Model Setup- initialization, parameter sweeps
  • Controls
  • Post-processing (GT-POST)
  • Model organization & sharing
  • Object libraries
  • Optimization

Note:

  • Class time listed is local time zone
  • Please join the waiting list. Event coordinator will reach out with more details
  • Due to the limited number of seats, priority will be given to commercial clients

GT News