WEBINAR | Inside the AI Factory: Simulating High-Fidelity Electrical Dynamics
While macro-level microgrid architecture defines how energy is sourced, the hyper-dynamic nature of AI clusters dictates how safely and efficiently that power reaches the silicon. Next-generation AI workloads introduce highly volatile, “spiky” load profiles; where an entire cluster can swing between 30% and 150% load in milliseconds, exposing data center power chains to unprecedented risks, including massive inrush currents, severe transient voltage droop, and campus-wide grid flicker.
To safeguard uptime, protect utility interconnection agreements, and manage extreme thermal loads, facilities engineering must move past steady-state assumptions and embrace dynamic, high-fidelity system simulation.
In this next installment of our series, we transition from macro-system planning to the deep electrical and thermal infrastructure of the AI data center. We will demonstrate how system simulation is used to evaluate next-generation 800 V DC setups under critical edge cases like power outages, dynamic AI workloads, and startup/shutdown sequencing. We will also showcase how to integrate high C-rate battery backup units (BBUs) directly onto the DC bus to absorb millisecond-scale power swings and smooth grid interaction.
Finally, we will explore a dual-track electro-thermal workflow: first evaluating system-wide responses that couple the electrical network with thermal management systems in GT-SUITE, and second evaluating component-level electro-thermal analysis of power converter systems in GT-SUITE.
What you will learn:
- Transient & Edge-Case Resilience: Techniques to simulate system-wide responses to volatile AI workloads, current inrush, grid failures, and critical startup/shutdown sequences
- Battery Integration & Grid Smoothing: How to model high C-rate Battery Backup Units (BBUs) directly coupled to an 800V DC bus to absorb millisecond-scale AI cluster power swings. Learn to simulate these energy storage systems as they mitigate utility flicker, control ramp rates, and bridge the critical 30-second window during a grid disturbance until generator startup
- System-Level Electro-Thermal Evaluation: Techniques to integrate electrical and thermal simulations in GT-SUITE for system-wide responses that include thermal management systems
REGISTER TODAY!
International ICE Forward Symposium
Gamma Technologies is heading to the International ICE Forward Symposium in Bologna, Italy on June 3-5
Gamma Technologies is proud to be a Platinum Sponsor at the International ICE Forward Symposium in Bologna, June 3–5, 2026. Visit our exhibitor booth to meet the team and explore how GT-SUITE supports the full internal combustion engine development cycle.
From engine performance modeling and predictive combustion analysis to exhaust aftertreatment optimization and real-time HiL simulation, GT-SUITE provides a comprehensive simulation environment for both SI and diesel engines. Whether you are working on emissions reduction, turbocharger matching, ECU calibration, or complete engine-vehicle integration, our team will be on-site to discuss how GT-SUITE fits your specific development workflow.
Pre-schedule your 1:1 meeting today with our GT experts by filling out the form below!
WEBINAR | Optimizing Distributed Energy Infrastructure for AI Factories Using GT-SUITE
The rise of AI data centers (AI factories) has stressed the ability of energy grids to reliably supply sufficient energy. Recent reports project data center energy usage to increase to between 325-580 TWh by 2028, or anywhere from 6.7-12% of the annual electrical energy consumption in the United States. Coupled with stringent requirements for reliability, cost control, and sustainability and net zero initiatives, long-term facilities planning and commissioning of the energy infrastructure for AI data centers is increasingly complex.
In this second webinar of a series, a deeper dive into the energy infrastructure surrounding AI factories is discussed. In particular, we will show how a modular, fast-running, multi-fidelity, multi-physics model of a microgrid can be created in GT-SUITE. We will explore how fungible designs with various behind-the-meter energy sources can be created virtually and analyzed to allow energy systems to be scaled and swapped, under a wide variety of locations and operating conditions. Lastly, we will discuss how economic factors can be added to the analysis, allowing for a comprehensive approach to long-term facilities planning.
What you will learn:
- Common components of a distributed energy infrastructure, and how to model them in different levels of fidelity using GT-SUITE software
- Why using GT-SUITE for system simulation empowers a modular, flexible, and fungible distributed energy infrastructure design
- How a techno-economic analysis (TEA) can be performed in GT-SUITE, using physics-based and/or data driven models to determine an optimal location-specific energy supply.
REGISTER TODAY!
CO2 Reduction for Transportation Systems Conference
From aftertreatment to hydrogen combustion — Gamma Technologies will be at the ATA CO2 Reduction for Transportation Systems Conference (June 9–10, 2026) at the Museo Nazionale dell’Automobile in Turin, Italy.
Visit our booth to discuss GT-SUITE systems simulation solutions and our commitment to zero-emission transportation, including our capabilities in aftertreatment and electric vehicle simulation.
On June 10th, our team will deliver two presentations in the Hydrogen for Sustainable Mobility track: “Integrated 1D/3D-CFD Modelling for Optimization of a Heavy-Duty Hydrogen Direct-Injection Engine” in collaboration with Hyundai Motor Group (11:10), and “3D-CFD Low-Cost Modelling of Hydrogen Injection Employing Lagrangian Particle Tracking Approach” in collaboration with Toyota Racing and Politecnico di Torino (16:30).
Pre-schedule your 1:1 meeting today with our GT experts by filling out the form below!
HIPER 2026
Gamma Technologies is heading to HIPER 2026 (June 3–5, Erfurt, Germany), the 18th Symposium on High-Performance Marine Vehicles. During the conference, GT’s own Senior Application Engineer, Milan Cvetkovic, will present on “Battery Lifetime Prediction using MBSE Simulation Workflow with Real-World Sea State Conditions”.
Our Business Development Representative, Vinitkumar Kshatr, will also be available throughout the event to discuss GT-SUITE systems simulation solutions for marine applications.
Pre-schedule your 1:1 meeting today with our GT experts by filling out the form below!
Engineering the Future of Data Center Cooling: Rapid, Reliable, System‑Level Innovation with GT‑SUITE
Join us on May 21st in Detroit for our Lunch & Learn series!
This event offers a great opportunity to discover the latest innovations in engineering simulation and GT-SUITE through expert-led discussions, hands-on insights, and live demonstrations.
Enjoy lunch while networking with industry professionals in an engaging and collaborative environment.
Topic: Engineering the Future of Data Center Cooling: Rapid, Reliable, System‑Level Innovation with GT‑SUITE
Explore how GT-SUITE delivers a multi-physics environment for simulating power, thermal, and control interactions across the full data center cooling system. From transient events to fault scenarios, learn how engineers can validate performance, optimize architectures, and improve system reliability before hardware deployment.
This event is designed for engineers, simulation specialists, researchers, and decision makers involved in product development, system simulation, and advanced engineering analysis.
Agenda:
Date: 05.21.2026
Time: 11:45 – 12:00 PM Sign-in and Networking
12:00-1:00 PM Technical Presentation & Eat Lunch
Place: Gamma Technologies Detroit Training Office: 3000 Town Center (Training room), Southfield, MI 48075
Smart Prototypes Summit 2026
Meet Gamma Technologies at the VI-GRADE SMART PROTOTYPES SUMMIT 2026!
Gamma Technologies is excited to join the SMART PROTOTYPES SUMMIT 2026 that will take place on May 19–21, 2026, in Udine, Italy.
The Smart Prototypes Summit will bring together automotive industry leaders to showcase the latest innovations in simulation-driven vehicle development.
Stop by the Gamma Technologies stand to meet our experts, Enrico Pautasso, Director of Engineering Services and Operations (GTE) and Luca Cambriglia, Staff Engineer (GTE). Discover how GT-SUITE, our efficient, cost-effective, and scalable simulation toolchain, empowers engineers to design, optimize, and validate electric powertrains with unmatched accuracy.
Pre-schedule your 1:1 meeting today with our GT experts by filling out the form below!
8th Design & Development of Zero-Emission Off-Highway Machinery Europe
We are pleased to announce that Gamma Technologies is a Silver Sponsor at the 8th Zero-Emission Off-Highway Conference (DZOM) 2026, taking place on May 27–28, 2026 in Berlin, Germany.
Our Director of European Operations, Jan Bobel, will be presenting on “Scientific AI and Digital Twin Ecosystem: Transforming Off-Highway Decarbonization”, a topic at the forefront of engineering innovation for zero-emission off-highway machinery.
We look forward to connecting with industry leaders and fellow engineers at this year’s event. Visit us at our booth to learn more about how GT-SUITE supports electrification and decarbonization across the off-highway sector.
Find more about the event: Zero-Emission Off-Highway Conference 2026 Europe | Electrification & NRMM
WEBINAR | Designing Resilient AI Data Centers with Simulation: Integrated Cooling, Power & Energy Management
AI data centers (AI factories) are undergoing a major transformation, driven by rapidly rising compute requirements, higher power density, the shift to liquid and emerging two-phase cooling technologies, and increasingly complex energy harvesting strategies.
Beyond thermal challenges inside the data center, facilities planners and operators must also navigate increasingly complex power supply management: balancing utility grid power with behind-the-meter resources such as generators, batteries, and renewables, while maintaining “five nines” reliability, controlling cost, and meeting sustainability goals.
In this introductory first part of a webinar series, we show how GT-SUITE enables an integrated, system-level approach by modeling cooling, power, controls, and energy infrastructure together from chip to facility. Through a focused use case demo (e.g., thermal ride-through following a cooling power interruption), you’ll see how fast and accurate, integrated, system simulation supports decision making from early concept and architecture trade studies (before construction) through detailed design, controls development, and product-in-use digital twin deployment. This is the first in a broader webinar series on next-generation data center engineering.
What you will learn:
Common technical challenges faced by various stakeholders in AI data centers
The power and breadth of GT-SUITE system simulation solutions in addressing these challenges for AI data center development, both inside and outside the data center.
Why using GT-SUITE for system simulation empowers a modular and fungible AI data center design
How GT‑SUITE spans “concept to product‑in‑use” – from early conceptual design and layout, to detailed analysis, to real‑time control and operational integration including SCADA system integration and digital twins.
REGISTER TODAY!
Lunch & Learn: Accelerate, Automate, Innovate: The Future of GT-SUITE with Generative AI
Join us on April 16 in Detroit for our Lunch & Learn series!
This event offers a great opportunity to discover the latest innovations in engineering simulation and GT-SUITE through expert-led discussions, hands-on insights, and live demonstrations.
Enjoy lunch while networking with industry professionals in an engaging and collaborative environment.
Topic: Accelerate, Automate, Innovate: The Future of GT-SUITE with Generative AI
GT-Automation and GT Intelligence Studio are transforming the way engineers work in GT-SUITE by reducing manual effort and accelerating model development. Combining Python-based automation with generative AI capabilities built directly into the GT-SUITE interface, these tools make it easier to create, modify, and analyze models with greater speed and consistency.
Built to simplify complex workflows and improve overall efficiency, these solutions help engineers spend less time on repetitive tasks and more time driving meaningful innovation. During the session, live demonstrations will show how processes that once took hours or even days can now be completed in minutes.
This event is designed for engineers, simulation specialists, researchers, and decision makers involved in product development, system simulation, and advanced engineering analysis.
Agenda:
Date: 04.16.2026
Time: 11:45 – 12:00 PM Sign-in and Networking
12:00-1:00 PM Technical Presentation & Eat Lunch
Place: Gamma Technologies Detroit Training Office: 3000 Town Center (Training room), Southfield, MI 48075
ATIC Korea Conference 2026
Register today at https://www.atic-kr.co.kr/kor/sub24/2026-Conference.html?ckattempt=1
GT & Airbus AIAA Webinar | Aerospace Perspectives Series: Engineering the Hydrogen Age: Multi‑Physics Simulations for ZEROe Aircraft
This webinar will introduce Airbus’ ZEROe project and detail its use of GT-SUITE to simulate different processes involving liquid hydrogen in transfer lines. We will cover the challenges of modeling transient cryogenic two-phase flow and demonstrate how GT-SUITE helps us predict thermal response and pressure instabilities.
We will highlight the value of simulation in the early stages of a project, when test data is scarce, and how it can help shape a clean-sheet aircraft design and operation.
REGISTER AT: https://aiaa.org/events/aerospace-perspectives-series-engineering-the-hydrogen-age-multi%e2%80%91physics-simulations-for-zeroe-aircraft/
MEET GAMMA TECHNOLOGIES AT NVIDIA GTC 2026
Come Meet US at NVIDIA GTC!
Gamma Tech will be onsite at NVIDIA GTC 2026 in San Jose (Mar 16–19).
We’ll be meeting with partners and customers and tracking the latest breakthroughs across inference, agentic AI, AI factories, and physical AI. Want to connect while we’re there? Use the link below to book time.
From CAE to the Entire Team: How GT-Play Accelerates Engineering Decisions
Join us on February 19th in Detroit for our Lunch & Learn series!
This event is a unique opportunity to explore the latest advancements in systems simulation and GT-SUITE through engaging workshops, expert insights, and practical demonstrations.
Enjoy lunch while connecting with industry professionals in a collaborative setting.
Topic: Explore how GT-Play is democratizing system simulation and accelerating product development across engineering teams
Built to support cross-functional product development, GT-Play bridges the gap between detailed CAE models and everyday engineering decisions. Engineers can run controlled simulations, perform sensitivity studies, and visualize results using standardized, expert-validated models, while benefiting from scalable cloud execution, controlled access, and seamless results sharing.
Agenda:
Date: 02.19.2026
Time: 11:45 – 12:00 PM Sign-in and Networking
12:00-1:00 PM Technical Presentation & Eat Lunch
Place: Gamma Technologies Detroit Training Office: 3000 Town Center (Training room), Southfield, MI 48075
Thermal Management Expo
Gamma Technologies at DKV-Tagung 2025
Gamma Technologies is proud to participate in the Deutsche Kälte- und Klimatagung (DKV-Tagung) 2025, Germany’s leading conference on refrigeration, air conditioning, and heat pump technologies. The event brings together experts from industry and academia to discuss the latest advancements in thermodynamics, system design, and sustainable cooling solutions.
On November 20 at 13:30, our Senior Application Engineer Matteo Luzzi will deliver a technical presentation titled:
“Akustisches Verhalten einer CO₂-Wärmepumpenanlage” (Acoustic Behaviour of a CO₂ Heat Pump System)
This session will explore the acoustic characteristics of CO₂ heat pump systems, examining how simulation-based approaches can help engineers predict and mitigate noise sources while optimizing performance and efficiency.
GT Technical Webinar Series: Accelerating Product Development with Virtual Calibration
Companies typically dedicate substantial time and resources to product calibration during development. This process is not only expensive but also creates bottlenecks that delay new product releases, frustrating both manufacturers and customers. Virtual calibration provides an innovative solution by shifting traditional calibration tasks to simulation environments. This approach dramatically reduces development timelines by months, cuts associated costs and enables companies to bring higher quality products to market more rapidly.
In this webinar, you will learn:
- Common calibration challenges that contribute to an increase in production development time
- What is virtual calibration
- How virtual calibration saves money and shortens product development
- How virtual calibration helps meet compliance regulations
Presenters:
Daniel Schimmel |Principal Application Engineer | Real Time Engine Modeling at Gamma Technologies
Supercomputing 2025
Join us November 16–21, 2025, at the America’s Center Convention Complex in St. Louis, Missouri, for Supercomputing 2025: the premier international conference for high-performance computing, networking, storage, and analysis.
Discover how Gamma Technologies harnesses the power of HPC to accelerate complex multiphysics simulations and enable system-level innovation across industries. From large-scale virtual testing to real-time optimization, GT-SUITE empowers engineers to design smarter, faster, and more sustainably.
We look forward to connecting with you in St. Louis and exploring how we can collaborate to advance the future of simulation and computational performance.
Book Meeting
Thermal Management for Electrically Driven Vehicles 2025
Gamma Technologies is joining the upcoming Thermomanagement für elektromotorisch angetriebene PKW (Thermal Management for Electrically Driven Vehicles 2025 ). This event brings together experts and innovators from the automotive industry to discuss the latest trends, challenges, and technologies in electric vehicle thermal management — from battery cooling and cabin comfort to system-level energy optimization.
On December 9 at 16:45, our Senior Application Engineer, Marek Lehocky, will present:
“Reinforcement Learning Control for Optimizing Occupant Comfort and Range in BEVs”
This presentation will explore:
• Numerical simulation of occupant comfort
• Application of reinforcement learning control
• Integrated simulation of the energy management system in BEVs
Thermal Management Expo
Gamma Technologies at Thermal Management Expo Europe 2025
Gamma Technologies is proud to participate in Thermal Management Expo Europe 2025, the leading event dedicated to cutting-edge innovations in thermal systems, materials, and technologies across automotive, aerospace, electronics, and energy sectors.
Our team will be on-site to showcase how GT-SUITE’s multiphysics simulation platform empowers engineers to tackle the growing complexity of thermal systems, from battery cooling to HVAC, propulsion, and beyond.
Don’t Miss Our Panel Discussion
Session: Closing Panel – Breaking Speed and Accuracy Barriers With AI-Powered Thermal Modeling
Date: November 12, 2025 | Time: 15:40
Speaker: Yogesh Nalam, Gamma Technologies
GTTC ’26 | Pune, INDIA
Join us at Gamma Technologies’ most renowned event – the GT Technical Conference (GTTC)! This key event for systems simulation professionals worldwide features insightful presentations from industry and GT experts, in-depth technical sessions on the latest systems simulation advancements, valuable networking opportunities, and practical case studies. Become a part of this dynamic and informative two-day event today!
VIEW FINAL AGENDA
Register for the GTTC ’26 Pune
GTTC ’26 | Hanau (Frankfurt), GERMANY
Join us at Gamma Technologies’ most renowned event – the GT Technical Conference (GTTC)! This key event for systems simulation professionals worldwide features insightful presentations from industry and GT experts, in-depth technical sessions on the latest systems simulation advancements, valuable networking opportunities, and practical case studies. Become a part of this dynamic and informative two-day event today!
View the Preliminary Agenda
Register for the GTTC ’26 Frankfurt
GTTC ’26 | Plymouth (Detroit), MI USA
Join us at Gamma Technologies’ most renowned event – the GT Technical Conference (GTTC)! This key event for systems simulation professionals worldwide features insightful presentations from industry and GT experts, in-depth technical sessions on the latest systems simulation advancements, valuable networking opportunities, and practical case studies. Become a part of this dynamic and informative event today!
SUBMIT A PRESENTATION ABSTRACT
REGISTER FOR GTTC’26 USA
The Battery Show North America 2025
Join us October 6-9, 2025, at Huntington Place (Cobo Hall) in Detroit for The Battery Show – the premier gathering of forward-thinking innovators and industry leaders in electrification.
Whether you are an OEM, supplier, or researcher, you’ll see how Gamma Technologies empowers faster development cycles, reduced costs, and more sustainable solutions for the electrified future.
We look forward to connecting with you in Detroit and exploring how can we collaborate to drive the next generation of mobility.
>>>>REGISTER HERE<<<<
Lunch & Learn: Accelerating Clean Mobility: GT-xCHEM for Emissions, Controls, and Beyond
Join us on October 22 in Detroit for our Lunch & Learn series!
This event is a unique opportunity to explore the latest advancements in systems simulation and GT-SUITE through engaging workshops, expert insights, and practical demonstrations.
Enjoy lunch while connecting with industry professionals in a collaborative setting.
Topic: Accelerating Clean Mobility: GT-xCHEM for Emissions, Controls, and Beyond
GT-xCHEM integrates the proven strengths of GT-SUITE into one powerful platform for exhaust aftertreatment modeling, evaporative prediction and onboard fuel reformer development.
Designed to meet both current regulatory requirements and future industry challenges, GT-xCHEM is also expanding into carbon capture and synthetic fuel production, offering a comprehensive solution for the evolving mobility landscape.
This event is tailored for engineers, researchers, and decision makers working in automotive engineering and powertrain development, emissions control and regulatory compliance, Hydrogen and sustainable fuel technologies.
Agenda:
Date: 10.22.2025
Time: 11:45 – 12:00 PM Sign-in and Networking
12:00-1:00 PM Technical Presentation & Eat Lunch
Place: Gamma Technologies Detroit Training Office: 3000 Town Center (Training room), Southfield, MI 48075
E-Machine Colloquium
Gamma Technologies at the E-Machine Colloquium
Stay up to date with the latest developments and challenges in electrical machine engineering at the upcoming E-Machines Colloquium in Ilmenau. The event brings together experts from industry and academia for in-depth technical discussions, knowledge exchange, and fresh inspiration for future projects.
Evolving from the former FEMAG User Meeting and held in conjunction with the Small Machines Colloquium, the new E-Machines Colloquium expands its scope to cover all aspects of electrical machine engineering, while maintaining a strong focus on electromagnetic challenges. It is designed not only for current FEMAG users but also for all professionals working in electrical machine design, simulation, and optimization.
Gamma Technologies is proud to participate with a dedicated booth and two FEMAG-related presentations by our GT experts. Join us to learn more about how GT-FEMAG supports advanced design and analysis of electrical machines, and discover how our simulation solutions can help accelerate your innovations.
European Heat Pump Summit 2025
Gamma Technologies at the European Heat Pump Summit 2025
Gamma Technologies is excited to participate in the European Heat Pump Summit 2025, taking place on October 28–29, 2025, in Nuremberg, Germany. The event gathers industry experts, researchers, and innovators to discuss the latest developments and technologies shaping the future of heat pumps.
Don’t miss our technical presentation:
“Fast and Accurate Modelling for Vapor Injection Compressors in Heat Pumps with Natural Refrigerants”
📅 Wednesday, October 29, 2025 | 🕤 09:30 – 10:00 | Presenter: Marek Lehocky
In this talk, Marek will present a modeling strategy for vapor injection compressors using natural refrigerants. A detailed model supports optimization, while a map-based model enables efficient system simulation in GT-SUITE, striking the right balance between accuracy and computational efficiency.
Hydrogen Technology Expo 2025
Gamma Technologies is exited to join the upcoming Hydrogen Technology Expo 2025, taking place in Hamburg on October 21-23,2025.
The event is dedicated to advancing clean energy, the event brings together global leaders to explore the latest innovations in hydrogen production, storage, fuel cells, and infrastructure.
We look forward to sharing our expertise and solutions in hydrogen storage, fuel cell systems simulation, optimization, and thermal management, helping accelerate the transition to a sustainable, hydrogen-powered future.
Battery Technologies Summit 2025
Gamma Technologies is pleased to participate in the upcoming Battery Technologies Summit 2025, a premier industry event designed to share innovative ideas, showcase the latest technological developments, and provide a global perspective on the rapidly evolving battery sector.
As part of the program, our GT Staff Engineer, Somayeh Toghyani, will deliver a presentation on October 23 at 17:40 titled:
“From Heat to Hazard: Predicting Thermal Runaway Events in Li-Ion Cells Using Multi-Physics Simulation”
The presentation will explore how advanced simulation tools can be applied to better understand and predict thermal runaway events, helping engineers design safer and more reliable battery systems.
In addition, attendees will have the opportunity to meet our GT Account Executive, Mehmet Fikret Yilmaz, to learn more about the powerful capabilities of GT-SUITE in the battery domai, from multi-physics modeling and thermal management to system-level integration.
The SafeBattery Experience
Meet Gamma Technologies at the SafeBattery Experience
Gamma Technologies is excited to participate in the upcoming SafeBattery Experience, taking place on October 8-9, 2025, in Klettwitz, Germany
Gamma Technologies is excited to participate in the upcoming SafeBattery Experience, a unique forum dedicated to the latest technologies and findings in automotive battery safety, testing, and simulation.
Automotive safety has long been guided by stringent legislation and consumer testing—battery safety is no exception. The SafeBattery Experience will highlight current and future legal requirements, NCAP assessments, and development standards, while also showcasing the latest testing technologies in real laboratory environments.
As proud sponsors, Gamma Technologies will contribute to the discussion with a presentation by our GT expert Yogesh Nalam, Senior Application Engineer, on:
“Understanding Battery Safety: Cooling and Venting Effects on Thermal Runaway Propagation”
The presentation will cover:
-
Introduction to thermal runaway risks in EVs and why thermal safety is critical.
-
Multi-physics modeling, combining electro-chemistry and thermo-fluids.
-
Simulation of cooling strategies and their role in effective thermal management.
-
Analysis of venting phenomena and its impact on thermal runaway propagation.
17th International Conference on Engines & Vehicles for Sustainable Transport
Meet Gamma Technologies at 17th International Conference on Engines & Vehicles for Sustainable Transport
Gamma Technologies is excited to participate in the upcoming 17th International Conference on Engines & Vehicles for Sustainable Transport, taking place September 14–17, 2025, in Capri, Italy.
The ICE Conference, founded nearly 30 years ago, has become a leading forum fostering cooperation between industry, research labs, and universities to advance sustainable transport. This year, Gamma Technologies is proud to participate, showcasing our cutting-edge capabilities for internal combustion engines. Meet our GT expert, Mattia Prestifilippo, during a presentation “Towards Effective SCR System Optimization: A 3D-CFD and Experimental Study Enabling Faster Deposit Formation Risk Assessment”
Learn discuss how GT-SUITE supports innovation in ICE development and sustainable mobility.
14th International Conference on Compressors and their Systems
Gamma Technologies is proud to be part of the 14th International Conference on Compressors and their Systems, taking place September 8–10 at City, St George’s, University of London
This 3-day conference, organized by the Centre for Compressors Technology, is a leading forum for the latest developments in air, gas, and refrigeration compressors, vacuum pumps, and expanders.
Gamma Technologies will have a strong presence at the event, including:
🔹A short course on September 6–7 dedicated to GT-SUITE 1D and Quasi-3D approach for detailed compressor
modelling: physics simulations empowered by ML by Dr. Matteo Luzzi. The short course will cover the following topics:
-
- Embedded compressor , thermal solution (CHT)
- 1D and Quasi-3D solution of discharge flow acoustics
- Fluid-Structure-Interaction workflow for scroll compressors
- Fault detection analysis, a ML-based tool integrated in GT-SUITE
🔹 Three technical presentations from our experts:
-
- On September 9, at 16:30, Sibi Kandasamy will present on “Multiphysics Modeling for Scroll Compressors: Coupling Structural and Thermal Deformations, Elasto-Hydrodynamic Thrust Bearing and Leakage”
- On September 10, at 13:35, Thomas Mikah will deliver a presentation on “Scroll Compressor Bearing Design using Integrated Multi-Physics Simulation”
- On September 10, at 14:00, Dig Vijay will host a presentation on “Investigation of the acoustical response of a CO2 heat pump system”
🔹 A demo workshop in collaboration with Professor Ahmed Kovacevic from PDM Analysis, showcasing how GT-SUITE and our newest tool GT-SCORG advance screw machine simulation.
Accelerating Innovation: The Strategic Role of Modelling and Simulation Across the Product Lifecycle
Today’s competitive landscape compels engineering organizations to deliver faster and more cost-effectively products that are increasingly innovative, reliable, and efficient. This workshop explores how the strategic use of modeling fidelity and the multiphysics simulation environment of GT-SUITE can drive value across the entire product lifecycle—from early concept design to engineering, validation, and predictive maintenance.
Leveraging products like our newest GT-SCORG for screw machine simulation, dedicated workflows for positive displacement machine types, and an integrated optimization and AI/machine learning platform, we’ll demonstrate how GT-SUITE enables engineers to balance model complexity and speed to optimize performance, reduce prototype testing, and accelerate design decisions.
Finally, we’ll show how GT-SUITE tools can ease the creation of high-fidelity digital twins, enabling predictive maintenance strategies that extend asset life, reduce downtime, and improve operational efficiency.
🔹An exhibition booth where you can meet our experts and explore GT solutions firsthand
>>>Register for the event<<<
Gastech Exhibition and Conference 2025
Meet Gamma Technologies at the Gastech Exhibition and Conference 2025
Gamma Technologies is excited to participate in the upcoming Gastech Exhibition & Conference, taking place September 9–12, 2025, in Milan, Italy.
As the world’s largest event for natural gas, LNG, hydrogen, and climate technologies, Gastech brings together global energy leaders to drive innovation and shape a sustainable future.
During the event meet our GT experts, Fabio Valesano, Sr Account Executive, and Vinitkumar Kshatri, Business Development Representative, and explore how GT-SUITE enables accurate system-level modeling and optimization of hydrogen storage, fuel cell systems, and hydrogen-powered mobility applications. From design to validation, discover how simulation accelerates development and improves performance across industries.
Data Center Frontier Trends Summit
Join us this August as we host a table at the Data Center Frontier Trends Summit. Stop by to talk with Gamma Technologies’ experts and discuss your data center simulation needs.
For next-gen data centers using Gamma Technologies’ GT-SUITE brings enterprise-grade rigor to power and thermal design. Teams perform virtual prototyping of microgrids, battery systems, and power converters, alongside liquid, air, and vapor-compression cooling—plus dry and evaporative options. Engineers simulate flexible loads, coolant flow, heat transfer, and emergency scenarios to lower PUE and TCO, prevent over-cooling, right-size components, and optimize topology and routing. Machine learning accelerates design-space exploration and tuning, linking models to real-world applications—from lab validation to site commissioning. The outcome: resilient, scalable facilities with reduced OPEX and clear alignment to environmental standards on the path to Net Zero
Lunch & Learn: GT as Enterprise Solutions
Join us on September 17th in Detroit for our Lunch & Learn series!
This event is a unique opportunity to explore the latest advancements in systems simulation and GT-SUITE through engaging workshops, expert insights, and practical demonstrations.
Enjoy lunch while connecting with industry professionals in a collaborative setting.
Topic: GT as Enterprise Solutions
GT-SUITE is evolving into a powerful, enterprise-ready engineering platform, enabling scalable, collaborative, and automated workflows across organizations.
Enterprise-focused capabilities such as offer a robust Python API for scripting, model manipulation, and batch execution. Built-in GIT integration ensures version control, traceability, and seamless collaboration across teams.
To broaden accessibility, GT-Play, Gamma Technologies’ next-generation web application, delivers simulation capabilities to non-expert users via an intuitive browser-based interface, helping to democratize GT-SUITE usage across the enterprise.
To meet the demands of large-scale simulation and optimization, GT-SUITE supports distributed execution on HPC clusters, accelerating turnaround time and maximizing enterprise computing resources.
Together, these capabilities position GT-SUITE as a scalable, automation-ready platform, empowering engineering teams to drive innovation with high fidelity, efficiency, and cross-functional collaboration.
Agenda:
Date: 09.17.2025
Time: 11:45 – 12:00 PM Sign-in and Networking
12:00-1:00 PM Technical Presentation & Eat Lunch
Place: Gamma Technologies Detroit Training Office: 3000 Town Center (Training room), Southfield, MI 48075
GT Germany Tech Summit
Join Gamma Technologies in Munich on October 14, for the GT Germany Tech Summit, a dynamic in-person event dedicated to advancing the role of system simulation in the journey toward net-zero and next-gen vehicle innovation.
Connect with industry professionals and GT experts to explore how simulation is driving efficiency, accelerating development, and enabling smarter, more sustainable mobility solutions.
At the summit, we’ll dive into key focus areas shaping the future of engineering:
-
Digital Twin and GT-Play
-
Workflow Efficiency through Automation, Machine Learning, and AI
-
xEV Energy Management (E-Powertrain + Vehicle + Thermal Systems)
-
Real-Time Applications
-
Clean ICE technologies, including e-fuels and xCHEM
Date: October 14, 2025
Location: Leonardo Hotel Munich Arabellapark, Effnerstraße 99, 81925 Munich
GT UK Tech Summit
Join Gamma Technologies in Gaydon for the GT Tech Summit, a dynamic in-person event dedicated to advancing the role of system simulation in the journey toward net-zero and next-gen vehicle innovation.
Connect with industry professionals and GT experts to explore how simulation is driving efficiency, accelerating development, and enabling smarter, more sustainable mobility solutions.
At the summit, we’ll dive into key focus areas shaping the future of engineering:
-
Digital Twin and GT-Play
-
Workflow Efficiency through Automation, Machine Learning, and AI
-
xEV Energy Management (E-Powertrain + Vehicle + Thermal Systems)
-
Real-Time Applications
-
Clean ICE technologies, including e-fuels and xCHEM
Lunch & Learn: From Fog to Flow: Cracking HVAC design with GT-SUITE
Join us on August 21st in Detroit for our Lunch & Learn series!
This event is a unique opportunity to explore the latest advancements in systems simulation and GT-SUITE through engaging workshops, expert insights, and practical demonstrations.
Enjoy lunch while connecting with industry professionals in a collaborative setting.
Topic: From Fog to Flow: Cracking HVAC design with GT-SUITE
Vehicle cabins are at the center of vehicle design and development. Understanding this unassuming design space is fundamental for developing heating and air conditioning systems that can maintain the cabin environment for comfort, thermal performance and energy efficiency.
GT-SUITE offers a range of model fidelities from simple 0D/1D nodal cabin models to fast running full 3D models and custom-built plant models for XiL applications.
During this Lunch & Learn you’ll hear from experts on the range of modeling fidelities and their applications. Applications will include initial HVAC system sizing, window fogging, solar transmission analysis, occupant thermal comfort and custom plant model building. These applications will showcase workflows and features that cover the range of modeling options in GT-SUITE.
Agenda:
Date: 08.21.2025
Time: 11:45 – 12:00 PM Sign-in and Networking
12:00-1:00 PM Technical Presentation & Eat Lunch
Place: Gamma Technologies Detroit Training Office: 3000 Town Center (Training room), Southfield, MI 48075
Lunch & Learn: GT as your Infinite Virtual Sensor in a physical test environment
Join us on July 17th in Detroit for our Lunch & Learn series!
This event is a unique opportunity to explore the latest advancements in systems simulation and GT-SUITE through engaging workshops, expert insights, and practical demonstrations.
Enjoy lunch while connecting with industry professionals in a collaborative setting.
Topic: GT as your Infinite Virtual Sensor in a physical test environment
Instrumenting and the maintenance of such instrumentation for physical systems to support testing or ECU development often demands significant time, effort, and cost, especially when high sensor density is required. This webinar explores how GT-SUITE, through real-time modeling and XCP harness integration, enables the use of virtual sensors to reduce physical instrumentation while still providing high-fidelity, system-level insights.
You’ll learn how a well-calibrated GT model can be used to estimate sensor signals across a system, even when measurements are available from only a subset of locations. This approach reduces the need for full physical instrumentation and can still provide accurate system-level data. Additionally, you’ll see how GT models can offer insights into parameters that are difficult or impossible to measure directly, enabling deeper understanding and more informed testing, calibration, and control development.
Whether you’re working on combustion systems, electrified powertrains, or thermal networks, this session will highlight how virtual sensing with GT-SUITE supports faster, leaner, and more insightful development workflows.
Agenda:
Date: 07.17.2025
Time: 11:45 – 12:00 PM Sign-in and Networking
12:00-1:00 PM Technical Presentation & Eat Lunch
Place: Gamma Technologies Detroit Training Office: 3000 Town Center (Training room), Southfield, MI 48075
Stuttgart International Symposium on Automotive and Engine Technology
From July 2 to July 3, Gamma Technologies is proud to participate in the 2025 Stuttgart International Symposium on Automotive and Engine Technology, one of Europe’s premier events for automotive and powertrain innovation. Taking place on July 2–3 at the Haus der Wirtschaft in Stuttgart, this year’s symposium centers on the theme “Automotive Vision: Design, Technology and Sustainability.”
xEV / HEV Battery Thermal Management Innovation Summit USA
Explore the latest breakthroughs in battery thermal management, system-level integration, and high-efficiency cooling architectures. Optimize battery performance, energy density, and fast-charging capabilities while ensuring safety and longevity. Gain valuable insights into predictive thermal controls, AI-driven management systems, and next-gen heat transfer materials shaping the future of electrification. Benefit from unparalleled networking with industry-leading OEMs, innovators, and technical experts. Meet with exhibitors to discover cutting-edge technologies and engineering solutions firsthand, fostering connections to advance your projects. This comprehensive experience ensures you stay at the forefront of xEV battery technology and system-level innovation.
Gamma Technologies will have a booth and presentation: https://www.battery-thermal-management-usa.com/agenda-palto-alto/
Join our presentation:
Safer Batteries through Integrated Systems Simulation: Optimize Performance & Mitigate Risks with Advanced Thermal Management
9:20AM | Gautham Ramchandran, Solutions Consultant, Gamma Technologies
Explore how holistic multi-physics and multi-fidelity integrated simulation techniques are leveraged in early-stage design and validation to proactively address thermal risks. How multi-physics modeling, covering electrochemical, thermal, fluid, structural, and controls domains, provides predictive insights into thermal propagation behavior and the effectiveness of containment or mitigation strategies. Learn how to evaluate and effectively explore the design space of material choices, cell spacing, coolant flow paths, and venting strategies—before physical testing—reducing both cost and time-to-market.
- Explore how simulation-driven design can optimize battery pack architecture, including cell spacing, cooling pathways, and thermal barrier placement for enhanced safety.
- Learn how to integrate different physics domains within a single system simulation environment taking into account effects such as swelling, real-world degradation, environmental boundary conditions and xEV system power demands under real driving cycles, to enhance the accuracy of thermal risk forecasting in battery systems.
- Understand how predictive modeling can be applied to simulate thermal runaway scenarios across various battery chemistries and configurations by considering a cell-to-module-to-pack approach to fully account for component-to-component variations.
- Examine real-world case studies demonstrating the successful application of holistic systems simulation to prevent thermal runaway propagation in high-energy battery packs.
- Gain insights into the integration of real-world data into digital twin frameworks for real-time battery systems to improve model reliability and validation.
More info on the event here: https://www.battery-thermal-management-usa.com/
GT India Tech Summit 2025 – Chennai, INDIA
Join us for an exciting in-person event in Chennai, on July 22, 2025 where we’ll discuss the vital role of system simulation in achieving net-zero emissions. This tech day offers a chance to meet industry experts, connect with GT’s teams, and learn how top companies use GT’s advanced solutions to tackle product development challenges.
Throughout the event, we’ll delve deep into various focus topics:
- Real-World System Simulation: Accelerating xEV Development with Modularity, Automation, and Machine Learning
- Leveraging battery electro chemical model to handle challenges of Degradation, Safety and Control
- Future Powertrains: Advances in Combustion, Fuel Cell, and Emission Technologies
- Enabling Holistic Thermal & Energy Management: An Integrated Simulation Approach
- Accelerating XiL and Digital Twin Development with Physics-Based Simulation Models: Customer Success Stories
Event Highlights:
- Inspiring keynote by a leading industry expert
- Client-led paper presentations showcasing real-world applications
- Deep-dive technical sessions from GT’s own specialists
Please note that registration is subject to GT approval; priority will be given to our local commercial customers.
GT India Tech Summit 2025, Bengaluru, INDIA
Join us for an exciting in-person event in Bengaluru, on July 24, 2025 where we’ll discuss the vital role of system simulation in achieving net-zero emissions. This tech day offers a chance to meet industry experts, connect with GT’s teams, and learn how top companies use GT’s advanced solutions to tackle product development challenges.
Throughout the event, we’ll delve deep into various focus topics:
- Real-World System Simulation: Accelerating xEV Development with Modularity, Automation, and Machine Learning
- Leveraging battery electro chemical model to handle challenges of Degradation, Safety and Control
- Future Powertrains: Advances in Combustion, Fuel Cell, and Emission Technologies
- Enabling Holistic Thermal & Energy Management: An Integrated Simulation Approach
- Accelerating XiL and Digital Twin Development with Physics-Based Simulation Models: Customer Success Stories
Event Highlights:
- Inspiring keynote by a leading industry expert
- Client-led paper presentations showcasing real-world applications
- Deep-dive technical sessions from GT’s own specialists
Please note that registration is subject to GT approval; priority will be given to our local commercial customers.
CAE Approaches for Analyzing Friction, Wear, Vibration, and Noise Phenomena in Mechanical Systems
Traditional mechanical system design has heavily relied on past experience and physical testing. However, leveraging CAE and MBD technologies has become essential for enhancing competitiveness in product development. This webinar highlights GT-SUITE’s unique capability to seamlessly integrate tribology (friction/wear) and NV (vibration/noise) analyses within a single environment. We will clearly explain the fundamentals of these analytical methods, introduce the latest features, and present practical application examples alongside built-in sample models. Our goal is to provide a clear vision of how GT-SUITE can be effectively utilized in your design and development workflows to address modern engineering challenges.
Presenter Bio:
Itaru Ushiki
IDAJ Co.,LTD., Engineering Supervisor
Works as a GT-SUITE/GT-AutoLion engineer at IDAJ Co., Ltd. Has various experience in simulation projects involving lubrication and friction of mechanical systems.
NOTE: This webinar is hosted by Gamma Technologies’ partner IDAJ Co., Ltd and presented in Japanese
Leveraging Simulation Technologies to Enhance Battery Development Efficiency
Battery development is a field with growing demand each year, particularly in the automotive industry where international demand for electrified vehicles powered by secondary batteries—such as EVs, HEVs, and PHEVs—has been increasing over the past few years.
This growth trend is expected to continue into the future.
In response to this trend, in addition to improvements in conventional lithium-ion secondary batteries, research is being actively conducted on various battery systems including advanced liquid batteries, all-solid-state batteries, and innovative battery technologies.
In this presentation, we will introduce simulation applications, GT-SUITE and GT-AutoLion as development support methods through simulation for addressing challenges in battery development.
Presenter Bio:
Tatsuki Sato
IDAJ Co.,LTD., Simulation Engineer
Works as a GT-SUITE/GT-AutoLion engineer at IDAJ Co., Ltd. Has various experience in simulation projects involving battery thermal management systems and battery performance analyses.
NOTE: This webinar is hosted by Gamma Technologies’ partner IDAJ Co., Ltd and presented in Japanese
The Battery Show Europe 2025
Meet Gamma Technologies at The Battery Show Europe 2025.
As the demand for electric vehicles (EVs) grows, so does the need for smarter, more efficient battery management solutions. From June 3 to June 5, meet Gamma Technologies (GT) at The Battery Show Europe 2025 in Messe Stuttgart.
Don’t miss GT’s presentation: “A Digital Twin Framework for Real-Time Prediction of Lithium-Ion Batteries.”where Somayeh Toghyani, Senior Application Engineer, showcases how digital twin technology can enhance Battery Management System (BMS) accuracy, optimize battery performance, and extend battery lifespan—all while reducing costs.
What You’ll Learn:
🔹 How high-fidelity electrochemical models improve BMS accuracy.
🔹 A new approach that balances computational efficiency and precision for real-time predictions.
🔹 The role of Hardware-in-the-Loop (HIL) simulations in validating battery models.
🔹 How digital twin technology helps extend battery lifespan, optimize performance, and reduce costs.
Looking to discuss your engineering needs with our team?
Pre-schedule your 1:1 meeting today with our GT experts by filling out the form below!
79th STLE Annual Meeting and Exhibition
Meet Gamma Technologies at 79th STLE Annual Meeting and Exhibition, taking place on May 19-21 in Atlanta, Georgia
More about the event: Event Overview
On May 21, 2025, at 2:00 PM (EDT), don’t miss the Gamma Technologies presentation ” Multi-Scale Analysis of Crankshaft Main Bearings: From System level to Detailed EHD Modelling”. GT’s own Staff Application Engineer, Ashwin Henry, will showcase how combining system-level modeling with detailed elastohydrodynamic (EHD) analysis can provide deeper insights into crankshaft main bearing performance.
Location: Fluid Film Bearings – Seals I
Lunch & Learn: Gearbox Power Loss Prediction with Increasing Levels of Fidelity
Join us on June 17th in Detroit for our Lunch & Learn series!
This event is a unique opportunity to explore the latest advancements in systems simulation and GT-SUITE through engaging workshops, expert insights, and practical demonstrations.
Enjoy lunch while connecting with industry professionals in a collaborative setting.
Topic: Gearbox Power Loss Prediction with Increasing Levels of Fidelity
Understanding component power losses under steady-state conditions is crucial for optimal gearbox design. By analyzing individual component losses early in the design process, engineers can make informed decisions to enhance overall gearbox efficiency.
Gamma Technologies has developed a validated workflow for gearbox loss prediction, using a system-level modeling approach that aligns with test measurements. This work has been further extended to high-fidelity tribology models for gear tooth and roller bearing contacts, incorporating a formal Elastic-hydro-dynamic (EHD) solution. This enhancement provides deeper insights into power losses and enables engineers to explore geometry modifications for improved efficiency.
Additionally, this high-fidelity approach accounts for temperature and localized effects, allowing for a detailed thermal balance equation to predict oil film temperature, body temperatures, and subsurface stresses in Gear3D and Roller Bearing3D models.
Agenda:
Date: 06.17.2025
Time: 11:45 – 12:15 PM Sign-in and Networking
12:15-1:00 PM Technical Presentation & Eat Lunch
Place: Gamma Technologies Detroit Office: 2000 Town Center, Suite #3000, Southfield, MI 48075
Lunch & Learn: Unlocking Machine Learning in GT-SUITE: Smarter Simulation and Faster Optimization
Join us on May 15th in Detroit for our Lunch & Learn series!
This event is a unique opportunity to explore the latest advancements in systems simulation and GT-SUITE through engaging workshops, expert insights, and practical demonstrations.
Enjoy lunch while connecting with industry professionals in a collaborative setting.
Topic: Unlocking Machine Learning in GT-SUITE: Smarter Simulation and Faster Optimization
As simulation engineers tackle increasingly complex systems—ranging from engines and batteries to HVAC—delivering fast and accurate insights is more critical than ever. This session explores how GT-SUITE’s Machine Learning Assistant enhances model fidelity and computational efficiency, enabling smarter simulations and faster optimizations.
We’ll walk through practical workflows for developing and validating machine learning models, including dynamic neural networks that preserve transient behavior. Attendees will discover how these models seamlessly integrate into system-level simulations, reducing iteration time, cutting testing costs, and unlocking new possibilities for innovative design and optimization.
Agenda:
Date: 05.15.2025
Time: 11:45 – 12:15 PM Sign-in and Networking
12:15-1:00 PM Technical Presentation & Eat Lunch
Place: Gamma Technologies Detroit Office: 2000 Town Center, Suite #3000, Southfield, MI 48075
2025 VI-Grade Zero Prototypes Summit
Gamma Technologies is excited to join the 2025 VI-Grade Zero Prototypes Summit that will take place on May 13–15, 2025, in Udine, Italy.
As the demand for electric vehicles (EV and HEV) continues to rise, so does the need for more advanced driver assistance systems (ADAS) to enhance safety, comfort and sustainability. At the same time, optimizing performance, efficiency, and durability remains a key challenge in electric powertrain development. These evolving trends are reshaping powertrain design, driving the shift toward more advanced virtual development methodologies.
The 2025 VI-Grade Zero Prototypes Summit will bring together automotive industry leaders to showcase the latest innovations in simulation-driven vehicle development.
Stop by the Gamma Technologies stand to meet our experts, Enrico Pautasso, Director of Engineering Services and Operations (GTE) and Luca Cambriglia, Senior Engineer (GTE). Discover how GT-SUITE, our efficient, cost-effective, and scalable simulation toolchain, empowers engineers to design, optimize, and validate electric powertrains with unmatched accuracy.
Pre-schedule your 1:1 meeting today with our GT experts by filling out the form below!
More about the event: 2025 VI-Grade Zero Prototypes Summit
Interested in scheduling a 1:1 meeting with GT experts? Fill out the form here: https://hubs.ly/Q03djVgc0
CIMAC 2025
Meet Gamma Technologies at CIMAC 2025, taking place on May 19-23 in Zurich, Switzerland.
More about the event: Event Overview
Interested in exploring how Gamma Technologies can support your initiatives? Schedule a meeting with GT’s experts Michael Zagun, Senior Staff Engineer, and Vinitkumar Kshatri, Business Development Specialist.
Interested in scheduling a 1:1 meeting with GT experts? Fill out the form here: https://hubs.ly/Q03dj10n0
