Global GT-SUITE Service Providers

Expert Simulation service providers GT-SUITE

Gamma Technologies frequently receives requests from companies who wish to outsource GT-SUITE simulation projects.  While we are pleased to receive such requests, GT’s primary focus has always been on providing the best and most advanced simulation software, rather than on consulting services.  For this reason, GT refers such requests to professional consulting firms.  It is in this spirit that we have established the “Consulting & Services Providers List” program, listing high quality consulting firms experienced in the use of GT-SUITE, which have built long term relationships with Gamma Technologies.

Powertech Engineering
Mahle Powertrain
Powertrain Technology
EMISIA
EngSim
InDesA
M Plan
FEV
IAV
Integrated Simulation Technologies Pvt. (IST)
AVL-LMM
Thermotec
Porsche Engineering
Danielson Engineering
TheSys
Roush
Equilibrium Solutions Pvt. Ltd. (ESPL)
Viridis Chemicals

Service ProviderEMISIA

EMISIA is an excellence center in powertrain engineering with emphasis on energy and environmental performance. With more than 30 years of experience in testing and modeling emission control technologies, EMISIA is the preferred integrated solutions provider in the automotive industry. We are a regular consultant to the European Commission and other international policy makers for the deployment of sustainable technological solutions. Our team of mechanical, chemical and electrical engineers offers a unique combination of multi-scale simulation and calibration/validation testing services in the following areas, using GT software tools: 

  • Exhaust aftertreatment  
  • Battery electrochemistry and systems  
  • Industrial reactors 
  • Fuel cell components and systems  
  • Thermal management  

EMISIA SA | Conscious of transport's impact

EMISIA SA
Antoni Tritsi 21
Pylaia-Thessaloniki
55535
Greece

Contact
Charis Kouridis
E-mail: [email protected]
Tel: +30 2310 473374
Website: www.emisia.com

IST Logo

 

Subir Mandal
Integrated Simulation Technologies Pvt Ltd
A2/19, Aditya Breeze Park, Balewadi, Pune, 411045, India
Phone: +91-9763909935
E-Mail: [email protected]
Website: www.integratedsimtech.com

Service Provider INTEGRATED SIMULATION TECHNOLOGIES (IST)

Integrated Simulation Technologies Pvt Ltd (IST) is an expert-driven engineering consultancy company and a leading 1D simulation service provider in E-Mobility development. We provide end-to-end system level solutions on performance development, energy economy, lower emissions and lower noise for E-Mobility.

We do staff augmentation with our high quality engineers in multiple domains. With our inherent advantages in 1D simulation, we create very highly competent & skilled engineers in GT-SUITE software to depute them at customer sites with zero lead-time.

We conduct very high quality training on advanced E-Mobility topics and GT-SUITE 1D simulation software modules to cater the needs from corporate, individual professionals and students.

IST provides consulting services for the development of xEV, FCEV and ICE driven applications using GT-SUITE.

  • E-Mobility vehicle performance
  • E-Mobility cooling system and vehicle thermal management
  • HVAC system modeling and simulation
  • Battery life and characteristics prediction
  • FCEV system architecture selection and H2 tank filing
  • Hydraulics & Lubrication
  • Engine performance and emissions
  • Plant model for RT simulation
  • Intake and exhaust acoustics
  • Cranktrain and Valvetrain simulation

Service Provider EQUILIBRIUM SOLUTIONS PVT. LTD. (ESPL)

As an established engineering service provider, ESPL offers CAE Services and Solutions for their global reputed customers. The focus is on delivering technically competent support to the customer’s requirements using Multi- Physics approach.

Offerings: 1D Systems, FEM, CFD, 1D- 3D Co-simulation, EMS, MDO, Customization, Scripting

Certifications:

  • Info Security: TISAX & ISO27001: 2013,
  • Quality: ISO 9001: 2015

Infrastructure: Availability of all commonly used CAE Software, In- house HPC Cluster

1D Know- how using GT Software:

  • Engine Systems: Performance, EAT, Intake Acoustic
  • E-Powertrain System: Sizing, Cell aging, Battery Thermal Runaway, E-drive performance coupled with the controllers
  • HVAC: warm-up, warm down, duct optimization, blower performance
  • Vehicle Thermal Management: Underhood, coolant circuit, Heat Exchangers
  • Fuel Cell Systems: Thermal performance, Hydrogen filling
  • Vehicle Dynamics: Drive cycle simulation

Integrated Engineering =>Mechanical + Electrical + Control Systems

ESPL has developed expertise on the development of E-Powertrain systems in an Integrated Engineering manner.

Equilibrium Solutions Pvt. Ltd

Phone: +91-20-25420085

Email: [email protected]

Website: https://eqmsol.com

Contact: Mr. Adwait Gokhale

Service Provider POWERTECH ENGINEERING S.R.L.

POWERTECH Engineering (PWT) is a flexible and agile consultancy company providing 1D, 3D-CFD and XiL simulation services to OEMs and Tier 1 suppliers operating in the automotive, heavy duty and marine sectors.

Through the years, PWT has gained relevant experience in all applications of 1D multi-physics simulation related to the design, development and validation of internal combustion engines, hybrid powertrains, electric drives and their control and components. Among our GT-SUITE competencies:

  • Simulation of ICEVs, xEVs and FCEVs
  • Vehicle Thermal Management (VTM)
  • Batteries and e-drive components
  • Engine performance
  • Acoustic and aftertreatment analyses
  • Hydraulics and lubrication
  • Engine and powertrain mechanics
  • RT simulation for XiL applications
  • Full-fledged ECU testing and validation (HiL)
  • 1D + 3D-CFD coupling

Thanks to cutting-edge know-how and the best-in-class simulation tools, we can support our customers with efficient and robust methodologies for current and future mobility challenges.

POWERTECH Engineering

 

Enrico Pautasso
POWERTECH Engineering S.r.l.
Via Carolina Invernizio 6
10127 Torino, Italy

Phone: +39 011-3167357
Fax: +39 011-0432273
E-mail: [email protected]
website: www.pwt-eng.com

powertrain technology

Riccardo Meldolesi
Powertrain Technology Ltd.
Unit 1
Riverside Business Centre
Brighton Road
Shoreham-by-Sea
BN43 6RE
United Kingdom

Contact:
E-mail: [email protected]
Tel: +44 (0)1273 466668
Website: ptlengines.com

Service Provider POWERTRAIN TECHNOLOGY

Powertrain Technology (PTL) are a team of experienced, multi-disciplined and creative professionals, highly skilled in design, analysis, development and procurement of turn-key engine and machinery projects. As independent engineering consultants we combine our simulation expertise with our extensive experience of materials, manufacturing and production techniques, coupled with a proven track record of innovation.

PTL applies GT-SUITE to:

  • Engine Performance modelling and acoustics
  • Cranktrains, Valvetrains, bearings and other mechanisms
  • Vehicle simulation – Conventional, Hybrid and Electric
  • Cooling & lubrication systems and fluid networks
  • Fuel Injection systems and other fast electro-hydraulic systems

Multi-physics Specialists – PTL can create high fidelity models of physical hardware for faithful replication of response to changes in design parameters and operating conditions. By leveraging GT-SUITE multi-physics capabilities we can model complex interactions and feedback loops which can occur and often affect the performance, transient operation and durability of engines and machinery. Other 3D packages, like CONVERGE and ANSYS, are often employed in co-simulation or as a mean to calculate specific GT-SUITE modelling parameters.

Service Provider MAHLE POWERTRAIN

MAHLE Powertrain delivers engine engineering and manufacturing services as a powerful complement to our customer’s own activities. From initial concept, through design, analysis, development, calibration and testing to prototyping and series production, we provide the complete value chain with extensive knowledge and experience.

MAHLE Powertrain has extensive experience of GT-POWER for performance simulation, specializing in performance and fuel economy optimization of both naturally aspirated and boosted engines, such as our downsizing demonstrator engine.

Vehicle dynamics and drive cycles of both conventional and hybrid vehicles are modeled using GT-SUITE for vehicle simulation (previous GT-Drive) and GT-SUITE for Valvetrain simulation (previous GT-Vtrain) is used in the development of new valvetrain components.

 

MAHLE Powertrain Ltd

Phone: +44 0 160 473 8000
E-mail: [email protected]
Website: www.mahle-powertrain.com

InDesA GmbH

Dr. Gerald Seider
InDesA GmbH
Carl-Zeiss-Ring 19a
85737 Ismaning
Germany
InDesA UK Limited
11 Highdown Road / Highdown House
Leamington Spa, CV31 1XT
England, UK
Phone: +49 89 5527978-15
Email: [email protected]
Website: www.InDesA.de

Service Provider INTEGRATED DESIGN ANALYSIS GMBH

InDesA is an engineering services and
consultancy company, specialized on the numerical analysis of complex fluid flow, gas dynamics, heat transfer and acoustics applications for various industry sectors but with a focal point on automotive and engine design.We maintain a high standard analysis quality and at the same time make appropriate use of resources by combining analytical approaches with simulation methods based on one or three dimensional flow and thermal transport theory. For one-dimensional analysis we look back on many years of experience with GT-SUITE, especially in the field of vehicle thermal management.

We customize and develop our analysis methods to the needs and development process of our customers. We keep our approaches flexible – whether it is for continuous and substantial development work over years or whether it is for short notice assignments under severe time constraints.

Service Provider ENGSIM CORPORATION

EngSim corporation is an engineering services company specializing in engine/vehicle simulation and analysis. EngSim’s goal is to be a knowledgeable and trusted resource for the design and development teams of engine manufacturers and suppliers. EngSim has provided its expertise to many leading automotive companies and suppliers around the world. EngSim’s expertise includes:

  • Engine Performance Modeling (Intake/Exhaust tuning)
  • Valvetrain Design (Valve timing, Cam & Design/Optimization)
  • Intake & Exhaust Acoustics
  • Diesel Aftertreatment
  • 1-D/3-D CFD Coupling
  • Vehicle Dynamics (Vehicle acceleration/drive cycles, hybrid/electric)
  • Fuel System Dynamics
  • Cooling System Performance
  • Real Time Simulation

EngSim Corporation

 

Brad Tillock
EngSim Corporation
PO Box 11
O’Fallon, IL 62269
USA
Phone: +1 (618) 624-5620
Fax: +1 (618) 624-5622
E-mail: [email protected]
Website: www.engsim.com

FEV GmbH

 

FEV GmbH
Neuenhofstr. 181
52078 Aachen
Germany
Phone:  +49 241 5689-0
Fax: +49 241 5689-119
Email: [email protected]
Website: http://www.fev.com

Service Provider FEV GMBH

FEV provides engine & powertrain development for combustion and hybrid systems, powertrain development & integration, suspension, electronic components and embedded software. FEV was among the first European GT-POWER users, and supported developing other GT-SUITE applications.

Today, FEV provides GT-SUITE services related to:

  • Engine Performance modeling
  • Analysis of engine cylinder pressure
  • Acoustics of intakes & exhausts
  • Exhaust aftertreatment
  • Hybrid and electric vehicles
  • Cooling systems and VTM
  • Lubrication circuits and bearings
  • Hydraulics and pneumatics
  • Underhood cooling module analysis
  • Fuel Injection systems
  • SiL, HiL and Real-Time Simulation

Service Provider M PLAN GMBH

As a long-standing partner of OEMs, system suppliers and component suppliers, M Plan is one of Germany’s leading mobility engineering specialists. We share our passion for mobility, technology and innovation with our employees, freelance experts and with our customers. We support our customers along the entire value chain from the initial idea until mass production. In product development, we make sure to involve tools and body shops from the very beginning and develop them simultaneously throughout the process if requested.

Our GT-SUITE competencies:

  • Lubrication Circuits (Detailed Pumps, Bearings, Camshaft Phaser, Hydraulic lash adjuster, transient / steady)
  • Combustion / Emission (Fuel Injection, combustion modelling, exhaust aftertreatment)
  • Performance simulation (engine, vehicle, lap time simulation)
  • Thermal Management (Vehicle cooling circuits)
  • Acoustics (exhaust and intake systems)
  • 3D Visualization of GT results
  • Modelling strategies for user-friendly usage

M Plan GmbH

 

Daniel Häußermann
M Plan GmbH
Niederlassung Weissach

Im Bühl 20
71287 Weissach

Fon +49 7044 9176-113
Fax +49 7044 9176-100
E-Mail: [email protected]
Website: m-plan.com

Service Provider THERMOTEC ENGINEERING

Thermotec is an engineering services company working in the fields of thermo-fluid dynamics, thermal and energy management, VTM,  cooling systems, lubrication, hydraulics and fuel injection systems.

We focus on customers from the automotive, aerospace & defense industries and chemical engineering. Thermotec works with state-of-the-art 1D and 3D simulation codes and has broad experience in the application as well as the coupling of different codes (i.e. structural mechanics, thermal radiation calculation and 1D/3D-CFD).

Thermotec operates test rigs for the validation and mapping of components like, e.g., automotive radiators and other thermo-hydraulic systems. Thermotec cooperates with leading departments of the Technische Universität München.

Thermotec Engineering

Dr. Robert Tauscher
THERMOTEC Engineering
Parkring 6
85748 Garching
Germany
Phone: 011+49 89 5527-790611
Fax: +49 89 5527906-13
E-mail: [email protected]
Website: www.thermotec-es.com

Porsche Engineering

Porsche Engineering Group GmbH Porschestrasse
D-71287 Weissach
Germany
Tel. +49 711 911 88888
Fax. +49 711 911 88999
Contact: [email protected]
Website: www.porsche-engineering.com

Service Provider PORSCHE ENGINEERING GROUP

Porsche Engineering combines the competence of Porsche as production manufacturer, technology company and engineering services provider. Porsche Engineering makes these many years of experience available to third parties from automotive and industrial field, according to a policy of strict confidentiality.

Porsche Engineering is able to support the design, the simulation (CFD, FEA, MBS) and the full testing process of a complete vehicle from the scratch to mass production.

Thanks to GT-SUITE interfaces to CAD (GEM3D / COOL3D) or CAD-embedded software simulation activities are integrated in the development process from the very early stages.

Main applications with GT-SUITE software platform:

  • Engine performance analysis
  • Turbocharging and supercharging
  • Dynamic behaviour of cranktrain
  • Dynamic behaviour of valvetrain under motored and fired conditions
  • Lubrication system
  • Cooling system and quasi-3D underhood analysis

Service Provider LMM

Since 1951, LMM has accumulated its competencies and processes and thus provides total capability in the field of piston engines. Extensive expertise has also been acquired in the field of tranmissions and hybrid transmission.  This allows LMM to act as a consultant for the complete powertrain, considered as a system.

LMM is equipped with state-of-the-art test benches, measurement, design software and advanced simulation tools (CFD, FEM, engine and powertrain simulation)

LMM provides GT-SUITE services related to:

  • Engine Performance modeling
  • Analysis of engine cylinder pressure
  • Acoustics intakes & exhausts
  • Exhaust aftertreatment

AVL LMM

 

Mr. Francois Lormier
CAE Manager
5-9, Rue Benoit Franchon
91127, Palaiseau, Cedex
France
Phone: +33 1 69 19 74 53
Mobile: +33 6 86 84 90 95
E-mail: [email protected]
Website: www.le-moteur-moderne.fr

IAV GmbH

IAV GmbH
Nordhoffstraße 5
38518 Gifhorn
Deutschland
Phone:  +49 5371 80-5260
Fax: +49 5371 80-52600
Website: http://www.iav.de

Service ProviderIAV GMBH

Employing over 6,500 staff across the globe, IAV is one of the leading providers of engineering services to the automotive industry. We provide our clients with production-ready solutions for the entire vehicle.

  • Concept studies, Parameter studies, Optimization- Engine/Vehicle performance Modeling
    Analysis of engine cylinder pressure
    Combustion and TC system layout
    Acoustics of intakes and exhaust
    Cooling system engine/vehicle
    Lubrication circuits and bearings
    Fuel Injection Components and Systems
    Hydraulics and pneumatics
    Model Based Controller Design for Advanced Boost Systems and Multi-Path EGR-Systems
    Exhaust Aftertreatment
    Vehicle thermal management
    Vehicle test cycle simulation
    Coupled simulations with 3D-Simulation Tools
    DoE

Service Provider DANIELSON ENGINEERING

Danielson Engineering is a company specialized in design, manufacturing and validation of prototype engines. As we are Fully integrated, we are able to manage global engine projects, from concept design to physical demonstrator.

Our efficiency relies on the combination of modelling approach and physical tests in house. Rapid prototyping equipments, fully equipped enginebenches, flow and component benches permit to compare, in short time, all computational results.

Calculation department activity focuses on CAE, CFD, FEA, 1D methods and virtual engine/powertrain with GT-SUITE.

We have all facilities on site to develop and improve numerical methodologies, particularly on GT-POWER applications, Cranktrain & Valvetrain Application of GT-SUITE.

Our know-how on valvetrains design, intake and exhaust ports optimization, and engine performance modelling guarantees success of our customers’ projects.

Danielson Engineering

Mr Olivier Larguier
Danielson Engineering
Technopôle – BP 35
58470 Magny-Cours
France
Phone: +33 3 86 218810
Fax : +33 3 86 21 21 50
E-mail: [email protected]
Website: www.danielson-eng.fr

TheSys GmbH

 

Axel Fezer
TheSys GmbH
Einhornstrasse 10
D – 72138 Kirchentellinsfurt
Germany
Tel.: +49 7121-696275-20
Mobil: +49 160-805-2461
E-mail: [email protected]
Website: www.thesys-engineering.de

Service Provider THESYS GMBH

TheSys is a competent and independent company providing engineering services on the field of the development of future engine cooling systems and heat exchangers.

Based on long-term experience, TheSys develops innovative cooling systems and future heat exchangers using 1-D as well as 3-D (CFD) thermodynamic simulation tools.

GT-SUITE is the standard 1-D simulation tool to help concept phase and CAD-design of heat exchangers and cooling systems before initiation of prototype build and validation testing on component test rigs or in the vehicle.

Service Provider ROUSH INDUSTRIES

Roush Industries, Inc. provides engineering, testing, prototype development, and low volume manufacturing services to the automotive, defense, energy, aerospace, and entertainment industries. Roush specializes in engine and propulsion system engineering using a combination of analytical and experimental methods.

From advanced research and technology development initiatives to production release Roush has the expertise and resources to bring concepts to reality. Roush, with over 4000 employees, was founded in 1976 and is based in Livonia, Michigan. Roush Industries, Inc. operates as a subsidiary of Roush Enterprises, Inc.

Roush Industries

Matt Van Benschoten
Roush Industries
36630 Commerce
Livonia, MI, 48150
USA Phone: 1 (734) 779-7546
Email: [email protected]
Website: www.roush.com

viridis chemicals

Viridis Chemicals
54A Mittal Towers
Nariman Point
Mumbai 400021
India
Email: [email protected]
Phone:  +91 22 66102304
Fax: +91 22 66102307

Service ProviderVIRIDIS CHEMICALS

Viridis provides custom chemistry solutions to gasoline and diesel aftertreatment catalyst systems in GT-SUITE. Viridis also develops system level optimization frameworks to help customers integrate and design complex aftertreatment solutions. All optimization frameworks are developed by integrating GT-SUITE models in Matlab.

Viridis currently develops reaction kinetics for the following catalyst systems:

  • Three way catalytic converter (TWCC)
  • Diesel oxidation catalyst (DOC)
  • Urea- and HC- SCR
  • SCRF
  • Lean NOx trap (LNT)

Please contact us to learn more about the recommended experimental protocols for the development of each of these chemistries.